Official Sideshow 1/6 ANH Darth Vader PHOTO Thread

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Oh dear, my Vader turned out more fragile than I expected. I had done the neck mod previously, shortening down the neck post then pinning and gluing it back together.

Pulling the head off to adjust his cape proved just how fragile.

SAM_0391.JPG
SAM_0392.JPG


I'll need to try something stronger, probably epoxy. Superglue just doesn't cut it. It's that bit trickier since those ball joints are now firmly in those sockets. There's no way they're coming out!

Vader's neck brace made it hard to see where the two pieces joined together. This was going to hinder my efforts at a repair so I cracked open his noggin to reveal this black pillar thing.

SAM_0393.JPG


Let' see how this turns out.
 
Sorry to see you've run into some trouble, Rory.

I recommend getting a screw and screwing it into the stuck ball. That will give you something to hold on to (with pliers, perhaps) in order to yank it out.
 
I was looking through my reference pics and found this great shot of ANH Vader. Just for fun, I put a photo of my KP02 modded Vader next to it to see how it compares. VERY happy with the results.

Looking at the cape though, it does look like it should be tighter together at the front of the neck. I think I may ask LForigno to do one like that for me.

2013-07-01-4635_zps5f8d038d.jpg


Chris
Very nice dude! :clap :rock
 
Nah it wasn't me. I was just having a laugh at omegas expense!
:lol

Dude, that stings. Wait until I get my epoxy, then we'll see who's laughing!

Seriously though, the screw and pliers trick sounds good. I've brought out the neck ball joint from the original SS body, which is a bit thicker and so hopefully not as fragile. I want to do the neck mod again, but will use epoxy instead of superglue and use extra metal pins this time.
 
You did "the neck mod"?

1) I have never heard of a neck mod.
2) Why would you want to modify the neck?

Yeah, never heard of it either. Before I saw the pics, for a split second I thought he was in the wrong thread and he was talking about the DX12 or something. :lol

Sent from my LG-E739 using Tapatalk 2
 
Yeah, never heard of it either. Before I saw the pics, for a split second I thought he was in the wrong thread and he was talking about the DX12 or something. :lol

Sent from my LG-E739 using Tapatalk 2

The idea was posted by Tabula Rasa some time ago on this thread. It involved taking out the neck post, cutting in half and shaving down by a few mm, then rejoining using glue and metal pins. As well as shortening down the figure a little, it made Vader' head rest more naturally and less bobble headed.
 
Yeah, Vader's head looks more bobble headed on the KP body. The other option was to put padding under the shoulder armour, which gave the illusion of a shorter neck.
 
So anyway, I had to remove those ball joints from the sockets somehow. I took a dremel to it, but afterwards it turned out ball joints would no longer fit snugly into the socket (too much plastic left over?).

SAM_0395.JPG


So I did two things:

1) Removed the piece inside the KP body's neck (which no longer provided a snug fit) and replaced it with a home made one, which I made by taking old sockets I had from HT bodies I used in another project.

2) Found the old ball joint from the SS body, cut it in half and shortened it. Then I drilled three holes into each end using a pin vice and inserted copper wire for added strength. Finally I glued it together with devcon epoxy and left to dry overnight.

SAM_0394.JPG
SAM_0397.JPG


This was the perfect opportunity to adjust my Iforigno tunic, repair the peeling velcro on the belt and fix the straps on the chest piece which were beginning to loosen. Last thing to do was to tweak the dome one more time, so that it would sit slightly lower. All done! He was a lot of work to make perfect and I had the misfortune of having to make these repairs, but at least it gave me a chance to create a much stronger neck joint. 3 copper pins and 2 ton epoxy should do it!
 
Back
Top