1/6 Hot Toys - MMS347 - Deadpool (2016) - Deadpool Collectible Figure

[kam veitch]

Got this pics in a group

Enviado desde mi iPhone utilizando Tapatalk

 

[DioramaMaker]

He has the longer pegs - speaking from someone who's figure has them.

 

[chewblacca]

Getting mine tomorrow. At least if ups delivers it when I'm home. They have a tendency to show up right before I get home from work.

 

[Cman]

Hey guys,

Another tip- if you exchange the neck peg deadpool comes with with another standard peg the neck looks normal. I noticed the one he comes with is a bit longer.


Sent from my iPhone using Tapatalk

 

[espio74]

Hey guys,

Another tip- if you exchange the neck peg deadpool comes with with another standard peg the neck looks normal. I noticed the one he comes with is a bit longer.


Sent from my iPhone using Tapatalk

That's interesting, can you please show a full figure pic so we can see the proportions better? I hear people say it looks off due to the small torso.

 

[Cman]

Actually I found out a better option since even with another peg the neck still look a little too high- take out the peg entirely and put the head inside. The suits turtle neck actually keeps it tight enough to where you don't need a peg and the head can go as low as you want. The turtle neck is tight enough you can even pose the head how you want.

I also put a little cotton in the chest and traps to fill out the torso.


Sent from my iPhone using Tapatalk

 

[TimothyR]

Got this pics in a group

Enviado desde mi iPhone utilizando Tapatalk

Looks cool.. But I'd rather keep the mask on for the same reason he did in the movie lol.

You know.. I'm kind of surprised he didn't make a joke about the physics of his eye movements.

 

[Hunterdnrc]

Anyone need accessories?

 

[BH8957]

Even I can tell those are the longer pegs. If it was shorter, the wrist cuffs completely overlap the forearm to the point that it rubs on the inside of the hands themselves which is what caused the issues. In the single photo, you can see where the forearm actually ends. Definitely the longer pegs. The reason we've seen a bigger space with the longer pegs in some shots is when there's bending of the wrist to, like, grab the sword from the back-sheath for example.
At this point, if people are really hemming and hawing over it - like my parents always said - "***** or get off the pot". It's starting to look like approaching beating a dead horse. If you have one coming, wait to see what the story is, and then decide there. That's all any of us can do, deal with and post about it on a figure by figure basis. If it's really a huge issue for you beyond your threshold of stress, then cancel the PO - it's like reading MMORPG forums where people post they're quitting over and over and the response to it now is "can I have your stuff", so in line with this, if you're cancelling, I'm absolutely positive someone will love to have your spot in the PO line. Just don't complain and cry when you regret it later. Nearly everyone is saying wait and see right now.

The figures are arriving in batches, and honestly, we should be seeing post after post filled with photos and fun til the rest of us get ours, no? Like Hunterdnrc with the accessories....I wanna know about the accessories, if Hunterdnrc made them, the process behind it, info, info, info and MOAR PIX PLZ! Kthnxbye.

J

 

[The Clown Prince]

Even I can tell those are the longer pegs. If it was shorter, the wrist cuffs completely overlap the forearm to the point that it rubs on the inside of the hands themselves which is what caused the issues. In the single photo, you can see where the forearm actually ends. Definitely the longer pegs. The reason we've seen a bigger space with the longer pegs in some shots is when there's bending of the wrist to, like, grab the sword from the back-sheath for example.
At this point, if people are really hemming and hawing over it - like my parents always said - "***** or get off the pot". It's starting to look like approaching beating a dead horse. If you have one coming, wait to see what the story is, and then decide there. That's all any of us can do, deal with and post about it on a figure by figure basis. If it's really a huge issue for you beyond your threshold of stress, then cancel the PO - it's like reading MMORPG forums where people post they're quitting over and over and the response to it now is "can I have your stuff", so in line with this, if you're cancelling, I'm absolutely positive someone will love to have your spot in the PO line. Just don't complain and cry when you regret it later. Nearly everyone is saying wait and see right now.

The figures are arriving in batches, and honestly, we should be seeing post after post filled with photos and fun til the rest of us get ours, no? Like Hunterdnrc with the accessories....I wanna know about the accessories, if Hunterdnrc made them, the process behind it, info, info, info and MOAR PIX PLZ! Kthnxbye.

J

whut?

 

[wolfcustom]

whut?

View attachment 300208

I think what they are saying is quit whining. You have two choices. Either keep it or cancel. Don't buy into the negativity as the majority of these will be great. Don't make a choice based off of others negativity and regret it later because this guy is sold out.
I myself have 2. One with sideshow and one with bbts. Not sure if I'm keeping the latter we will see. I've not once thought about cancelling this. 234.99 is nothing for a figure of this calibur. Is pay close double for a custom 90's deadpool but seeing that the only one I wantbisnt for sale on settling on him. Serious guys if you have it pre ordered hold on to it and see for yourself.

As to the second comment about the accessories? How they are made and other trade secrets? I blame late night pain medication induced posting.

Hunter sells those sets. Contact them via private message.

 

[JonD7]

Actually I found out a better option since even with another peg the neck still look a little too high- take out the peg entirely and put the head inside. The suits turtle neck actually keeps it tight enough to where you don't need a peg and the head can go as low as you want. The turtle neck is tight enough you can even pose the head how you want.

I also put a little cotton in the chest and traps to fill out the torso.


Sent from my iPhone using Tapatalk

Whoa! that looks SO much better!

 

[Cicada17]

I'm so glad Hunter is offering premium quality accessories for Deadpool! This figure merits more accessories. Everyone's gotta get 'em!


Sent from my iPhone using Tapatalk

 

[Cman]

Yeah I think taking out the neck peg makes a huge difference!


Sent from my iPhone using Tapatalk

 

[jedijim3002]

Got this pics in a group

Enviado desde mi iPhone utilizando Tapatalk

That looks awesome! Where is that available?

 

[Brainiac]

That looks awesome! Where is that available?

Not sure about that one but theres some customs and interest threads on the forum here

 

[enzolt]

That looks awesome! Where is that available?

I'd keep an eye on eBay. Looks like its from China.

 

[enzolt]

Who offers those Deadpool accessories?

 

[poseidon215]

Who offers those Deadpool accessories?

Hunterdnrc.
Go to the custom thread and search for it.


Sent from my iPhone using Tapatalk

 

[enzolt]

Hunterdnrc.
Go to the custom thread and search for it.


Sent from my iPhone using Tapatalk

Thank you. I hope this helps out other members as well.