InArt: The Lord of the Rings - Gandalf 1:6

shop deals on amazon
Advertise with us
Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Gipetto0812 said:
My one and only order from KGH was shipped with Hong Kong post and it took about 3 months to get to the US for a 1/6 Assassins Creed figure. Also, be prepared for one side of the shipping box to have nothing but stamps all over it :LOL:
Click to expand...
Okay thank you--all the hype from grabbing a Gandalf will need to be tempered as I still have 2.5 months to go. Tracking still has it in Hong Kong but not updated in forever. Excited to join all of you in the glorious "futzing" of the grey one!
 
TwistedMetal said:
Diorama "Gates of Durin/Moria View attachment 695811is readyView attachment 695812View attachment 695813View attachment 695814View attachment 695815View attachment 695816View attachment 695817View attachment 695818View attachment 695819View attachment 695820View attachment 695821View attachment 695823View attachment 695824View attachment 695825View attachment 695826View attachment 695827View attachment 695828View attachment 695829View attachment 695830View attachment 695831
Click to expand...

Bucky Underbelly said:
I just don't understand why the big companies aren't making cool stuff like this. (I mean, it would never be THIS nice, of course! But still!) Seems like there's a market for mass produced dios. A bit of Rivendell? Lothlorien? Front door of Bag End?

Will you be selling these, TwistedMetal? Do you have a thread?
Click to expand...

TwistedMetal said:
I sell all my works in unlimited quantities. But not here.
Click to expand...

Holy forking shirt-balls!
How much and where do we order - I'm not joking, this is stunning
 
Mine came today and I opened it up like 30 minutes ago. A few things to share that I do not like.
1. The base - those magnets are useless. They should have used stronger ones as with these, the figure can easily top over.
2. The gripping hands - checked all hands and only those two - left and right, have issues properly fitting in the pegs. Seems the holes are not deep enough.
Apart from those two above, I really like him. One issue I noticed - one of the hands had its magnet fall out. Any glue you would recommend to glue it back? For the moment, I have used iFixit tweezers to push it back in and it stays, but might come off again, so better glue it.
Fun thing. It came in the shipper that Kit used, then there was another InArt shipper, then another and finally the figure box itself. Felt like opening those russian nested dolls 🤣🤣🤣
 
I put clear gorilla mounting tape on the bottoms of his shoes where the toe box is. Really helped a lot with the stability. He doesn’t wobble anymore.

I like my Gandalf too but it’s disappointing to hear that the hands are an issue with the later batches. My left grip hand just falls right out. And the pointing finger magnet was out of the hand as well.
 
satanatos said:
Mine came today and I opened it up like 30 minutes ago. A few things to share that I do not like.
1. The base - those magnets are useless. They should have used stronger ones as with these, the figure can easily top over.
2. The gripping hands - checked all hands and only those two - left and right, have issues properly fitting in the pegs. Seems the holes are not deep enough.
Apart from those two above, I really like him. One issue I noticed - one of the hands had its magnet fall out. Any glue you would recommend to glue it back? For the moment, I have used iFixit tweezers to push it back in and it stays, but might come off again, so better glue it.
Fun thing. It came in the shipper that Kit used, then there was another InArt shipper, then another and finally the figure box itself. Felt like opening those russian nested dolls 🤣🤣🤣
Click to expand...

I had the same experience. Seems like the hands not fitting is a common issue. The magnets fell out of the hands of mine as well. I'm not fussed about putting them back in as I don't really think they did anything. The friction of the peg in the hand is what really keeps them in place.

I was also amused by the abundance of boxes opening this thing up.
 
Earth 616 Collector said:
Yep, the more I've messed with my Gandalf the more I've really been struggling with some on the hands going in all the way. I think my issue has been with the gripping hands as well. Sometimes they will just drop off until I really force them in there.
Click to expand...

JackRusselTs said:
later batches.
Click to expand...
I will post this to InArt. I have told them on several occasions to watch for their QA. It is good that they are looking to increase production, but if this is at the cost of quality, then it is a really bad thing and can damage their reputation quite a bit.
 
satanatos said:
Mine came today and I opened it up like 30 minutes ago. A few things to share that I do not like.
1. The base - those magnets are useless. They should have used stronger ones as with these, the figure can easily top over.
2. The gripping hands - checked all hands and only those two - left and right, have issues properly fitting in the pegs. Seems the holes are not deep enough.
Apart from those two above, I really like him. One issue I noticed - one of the hands had its magnet fall out. Any glue you would recommend to glue it back? For the moment, I have used iFixit tweezers to push it back in and it stays, but might come off again, so better glue it.
Fun thing. It came in the shipper that Kit used, then there was another InArt shipper, then another and finally the figure box itself. Felt like opening those russian nested dolls 🤣🤣🤣
Click to expand...
I've had my Gandalf for about 2.5 - 3 months now and haven't had any issues with the base. He has been holding up the sword and staff most of that time. The magnets dont seem as strong as the Joker base but are doing the job. Also haven't had issues with that base either. Although I really wish they would just make the whole base magnetic.
 
Well, cover me impressed. They guys included info about the battery and if everyone had read the manual (RTFM!) they would not be asking InArt questions about after sales issues. They clearly state it there to contact the store you purchased the figure from. And only reach out to InArt if you receive no reply from the shop.
Another thing is that according to the included card, my fig was manufactured in August 2023... Talk about long delivery......
Oh, did I mention the sculpt is a KILLER?!? Down to the age spots on the skin. Eat that, Asmus!
20240404_084421.jpg


And yes, I sniffed the sculpt. Has a distinct smell like of some styling gel
 
Last edited:
Tested all hands, to see if I will have issues with the magnets or fitting. The result was that the open palm hand magnet fell out (I pushed it back in and its good for now) and the two gripping hands do not peg in fully. They still stay firm on the pegs, but not as much as the other hands. No other issues with the fig or accessories. And yeah, will again mention the weak base magnets. But my plan is to have him sitting on a tree log anyway 😜
 
My Inart Gandalf has arrived and unfortunately the head has some small paint defects on the nose... has this happened to anyone else with these new batches?
 

Attachments

  • IMG-20240403-WA0015.jpg
    IMG-20240403-WA0015.jpg
    172.3 KB · Views: 0
  • IMG-20240403-WA0016.jpg
    IMG-20240403-WA0016.jpg
    137.4 KB · Views: 0
  • IMG-20240403-WA0018.jpg
    IMG-20240403-WA0018.jpg
    217.1 KB · Views: 0
My Gandalf arrived with his left hand amputated 😄. Overall nice figure.
 

Attachments

  • 20240404_174213.jpg
    20240404_174213.jpg
    1 MB · Views: 0
  • 20240404_174313.jpg
    20240404_174313.jpg
    926.6 KB · Views: 0

Similar threads

BANE.
Sold InArt: The Lord of the Rings - Gandalf 1:6
Replies
1
Views
671
BANE.
BANE.
Comic Concepts
Now Available: InArt Dune Paul Atreides Sixth Scale Figure 1:6 Limited Collectible
Replies
0
Views
320
Comic Concepts
Comic Concepts
GaryPool
InArt Phoenix Joker 1/6
65 66 67
Replies
1K
Views
69K
Chopper Face
Chopper Face
Shoo
InArt: The Lord of the Rings - Aragorn 1:6
158 159 160
Replies
3K
Views
264K
ScotsCav
ScotsCav
Comic Concepts
Now Available: Hot Toys Han Solo Sixth Scale Figure Star Wars Return Of The Jedi 1/6 Limited Collectible
Replies
0
Views
275
Comic Concepts
Comic Concepts

Latest posts

Back
Top