1/6 DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
- Thread starter Mr. EcKo
- Start date
Help Support Collector Freaks Forum:
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
It is a splendid photograph!
happier with the figure every day. no bad sides already are seen, only good ones. a great improvement over MMS117 and forget i ever said anything opposite.
as for the "age", it seems to fully depend on light direction.
yes it does look younger in overall light, but, as T-800s from T1 and T2 were supposed to look absolutely similar in the first place, including "age"... no problem.
It is a splendid photograph!
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
well thank you people but i just repeated some movie angles and lights, so all credit must go to Cameron
...and to HT sculptors who didn't produce THAT:
well thank you people but i just repeated some movie angles and lights, so all credit must go to Cameron
...and to HT sculptors who didn't produce THAT:
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
P., great pics and I completely agree with your thoughts on it too.
P., great pics and I completely agree with your thoughts on it too.
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
Thanks for that reminder. Now that barely looks like Arnie, and I might have considered it a step-down from MMS117 as some people seem to think the one we got is.
well thank you people but i just repeated some movie angles and lights, so all credit must go to Cameron
...and to HT sculptors who didn't produce THAT:
Thanks for that reminder. Now that barely looks like Arnie, and I might have considered it a step-down from MMS117 as some people seem to think the one we got is.
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
THAT is the reason I wasn't excited about this figure until in hand pics dropped!
Mines at home!
roll on 5 o clock.
well thank you people but i just repeated some movie angles and lights, so all credit must go to Cameron
...and to HT sculptors who didn't produce THAT:
THAT is the reason I wasn't excited about this figure until in hand pics dropped!
Mines at home!
roll on 5 o clock.Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
imagine HT thinking now: "we didn't give them what we promised, let's work harder on BD version and return to THAT"
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
no prob..mate..I'll do the mod for the eyes too
here we go with pics..
I have mod the head about the same sushi did..but for the most I pushed that horrible wide ears...and I've emphasisezed the wrickle on the face a little bit...
fotr the rest is all the mms plus a grenade launcher coomodel, an ht bag and a not m134 coomodel..
I really love how is tailoring the mms clothes on this...not the same of the dx...absolutely...
no prob..mate..I'll do the mod for the eyes too
here we go with pics..
I have mod the head about the same sushi did..but for the most I pushed that horrible wide ears...and I've emphasisezed the wrickle on the face a little bit...
fotr the rest is all the mms plus a grenade launcher coomodel, an ht bag and a not m134 coomodel..
I really love how is tailoring the mms clothes on this...not the same of the dx...absolutely...
Last edited:
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
That looks great. You've got rid of the Enterbay effect of ''too sticky outty' hair on the back of his head - another minor downgrade on the DX10 other than the neck.
Do you have any pics of how you shaved down the removeable hair-piece? I'd love to try it at some point. I know Sushi pioneered this one but I think he took it a bit too far - you nailed it though.
no prob..mate..I'll do the mod for the eyes too
here we go with pics..
I have mod the head about the same sushi did..but for the most I pushed that horrible wide ears
That looks great. You've got rid of the Enterbay effect of ''too sticky outty' hair on the back of his head - another minor downgrade on the DX10 other than the neck.
Do you have any pics of how you shaved down the removeable hair-piece? I'd love to try it at some point. I know Sushi pioneered this one but I think he took it a bit too far - you nailed it though.
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
If that were the case, then people would not be complaining on this very board that T2 was less bulky than T1, pointing out that the muscle body of MMS 117 was inaccurate.
Either they're both young and bulky or T2 should be less buffed and display Arnie's age.
If that were the case, then people would not be complaining on this very board that T2 was less bulky than T1, pointing out that the muscle body of MMS 117 was inaccurate.
Either they're both young and bulky or T2 should be less buffed and display Arnie's age.
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
I've glued the hairpiece to the head, because I can reach the pers system with my finger easly..better than that supertight joystick..
I 've cut about 2 mm and can you see the seam cut line is invisible...I was very afraid about that but I got a good result..
my omake to sushi...ありがとうございました
I've glued the hairpiece to the head, because I can reach the pers system with my finger easly..better than that supertight joystick..
I 've cut about 2 mm and can you see the seam cut line is invisible...I was very afraid about that but I got a good result..
my omake to sushi...ありがとうございました
Last edited:
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
^ saw that coming.
Ah, of course. You're using the DX head on the MMS body and have therefore also removed the interior part with the balljoint on it.
What tool did you use to perform the cut?
^ saw that coming.
I've glued the hairpiece to the head, because I can reach the pers system with my finger easly..better than that supertight joystick..
I 've cut about 2 mm and can you see the seam cut line is invisible...I was very afraid about that but I got a good result..
Ah, of course. You're using the DX head on the MMS body and have therefore also removed the interior part with the balljoint on it.
What tool did you use to perform the cut?
Last edited:
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
It was pretty much asked for
It was pretty much asked for
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
To be fair, yeah, we can't have it both ways. If he has to be slimmer for T2 then he also has to look older in the face. Again there are lines and wrinkles but they are perhaps too subtle and with this new 'soft sculpt' phenomenon the surface of the skin overall is smoother than the MMS. Its a matter of preferance on this issue. I think DX10 isn't so much younger than he ought to be as MMS117 looks older than he ought to be. Thus I prefer DX10. And for many other reasons besides.
It was pretty much asked for
To be fair, yeah, we can't have it both ways. If he has to be slimmer for T2 then he also has to look older in the face. Again there are lines and wrinkles but they are perhaps too subtle and with this new 'soft sculpt' phenomenon the surface of the skin overall is smoother than the MMS. Its a matter of preferance on this issue. I think DX10 isn't so much younger than he ought to be as MMS117 looks older than he ought to be. Thus I prefer DX10. And for many other reasons besides.
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
I feel ashamed to write this ....
a simply foot nails scissor for the hair piece
for the wrinckles I used a screwdriver covered with a thin cloth
and a dremel for the head inside
now I am waiting for the 2nd head to mod the eyes...
I feel ashamed to write this ....
a simply foot nails scissor
for the hair piecefor the wrinckles I used a screwdriver covered with a thin cloth
and a dremel for the head inside
now I am waiting for the 2nd head to mod the eyes...
Last edited:
Dollmanron
Super Freak
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
What, what. What are you guys talking about cutting?
What, what. What are you guys talking about cutting?
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
Sounds about as amateur as me 'colouring in' the saddlebags on my Harley with a black marker! But it worked, in both our cases.
See the pic I quoted in my post on the previous page. Shadowfla modded the hair on the back of Arnie's head so that it doesn't puff outwards so much. Its also a peeve of mine with the stock figure, so I want to do the same mod.
I feel ashamed to write this ....
a simply foot nails scissor
for the wrinckle I used a screwdriver covered with a thin cloth
Sounds about as amateur as me 'colouring in' the saddlebags on my Harley with a black marker! But it worked, in both our cases.
See the pic I quoted in my post on the previous page. Shadowfla modded the hair on the back of Arnie's head so that it doesn't puff outwards so much. Its also a peeve of mine with the stock figure, so I want to do the same mod.
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
yes sound weird but sometimes weird ways works better, than pro ways
I've done some pratice with my leon headplay head (now is completely riuned )but for the t2 it worked well
be careful only 2 mm not more..follow sushi inst..
Sounds about as amateur as me 'colouring in' the saddlebags on my Harley with a black marker! But it worked, in both our cases.
yes sound weird but sometimes weird ways works better, than pro ways
I've done some pratice with my leon headplay head (now is completely riuned
)but for the t2 it worked wellbe careful only 2 mm not more..follow sushi inst..
Dollmanron
Super Freak
Re: Hot Toys - DX10 - Terminator 2 - T-800 Cyberdyne - Official Specs & Pics
Leon, as in Resident Evil Leon? I didn't even know headplay made one.
yes sound weird but sometimes weird ways works better, than pro ways
I've done some pratice with my leon headplay head (now is completely riuned
Leon, as in Resident Evil Leon? I didn't even know headplay made one.
