Sideshow 1/6 ROTLA Indiana Jones Image Thread

[Khev]

"You can tell that to Jabba, he may only take your ship."

"Over my tan face/pale body!"



Great pics!

 

[Khev]

Yea, body seems to be ass. Better be fixed by the time Snake Eyes ships.

You better believe it!

 

[bluechalice]

Hey does your indy have a cut in it too? doesnt seem like it in the photos you posted..

 

[King Darkness]

Hey does your indy have a cut in it too? doesnt seem like it in the photos you posted..

Yes it does.

Mine, yours, Wor-Gars, and JediMikes all have it. Its intentional.

 

[bluechalice]

Hey king darkness could you post a pic when you have time of the cut on the shirt? How long is it? Less than 5mm? Cause from the pics I cant see it...

 

[Wor-Gar]

Hey king darkness could you post a pic when you have time of the cut on the shirt? How long is it? Less than 5mm? Cause from the pics I cant see it...

Here's mine if you missed it.

Man, there's gonna be a lot of talk about this over the next few weeks, since we've talked about it so many times just tonight alone.

Indy made my sig, so he can't be all bad.

 

[King Darkness]

Hey king darkness could you post a pic when you have time of the cut on the shirt? How long is it? Less than 5mm? Cause from the pics I cant see it...

No prob....

 

[King Darkness]

Mine is EXACTLY like Wor-Gars above, he took a better picture than me, but it is exactly like his.

 

[Wor-Gar]

Mine is EXACTLY like Wor-Gars above, he took a better picture than me, but it is exactly like his.

But I think yours shows better how its suppose to lay, as mine was flipped inside up which may confuse people wiithout it in-hand to understand.

That cut flap is to be turned inward -- but as you can see the lower part that is usually folded and hemmed has been left open and has the snap on it -- thus less material to show through the thin shirt when closed. They also used clear snaps to avoid black shadows under the material... so this was very thought out on Sideshow's part.

 

[King Darkness]

What WG said. The cut actually helps it lay down easily.

 

[Promising Galahad]

Damn, King Darkness! Great pics! You make me really glad I got this figure on order! (I finally snagged an exclusive due to cancellations.)

 

[King Darkness]

Just incase anyone missed these, some are already 80 posts back, so heres a few just incase you missed them.

 

[bluechalice]

Oh crap! I think I might just order mine too@@ Looks Great!
I see now how the cut is...I guess its intentional then. Just a shortcut way of doing the shirt, could've been better though. I think it needs a little brushing with some superglue on the edges to make sure it doesn't fray or tear more if you're gonna be rough with the figure.

 

[Wor-Gar]

I can't compete with King's great shots, but I'll add a slightly blurry close up.

Full figure -- forget the unfutz'd fig but look at that face! That's Ford!

 

[The Josh]

Looking forward to the 25th.

 

[karamazov80]

Great pics there! I may actually take the jacket off and have mine posed in his get-up from the market scene from Raiders.

I've got mine pre-ordered from Cornerstorecomics, but no word yet. I hope I don't have to wait too much longer before he ships!

 

[small_studios]

Here's mine if you missed it.

Man, there's gonna be a lot of talk about this over the next few weeks, since we've talked about it so many times just tonight alone.

Indy made my sig, so he can't be all bad.

Why in gods name!! Well maybe some fabric glue can fix that or least make it look a bit better if you wanted his shirt alil more open. Your guys photos are getting me pumped for this one! Oh can anoyone post a pic of the neck post?

 

[Batty]

Great pics, King! Can't wait to get mine.

 

[lerath666]

Thanks, Bro. But you can be shocked when your figure flops around with loose joints. Again, any quick fix suggestions?

Have anyone contacted S.S. yet to address the issue? Sounds to big to ignore, maybe they can send replacement bodies with tighter joints....... Hey is it possible to tighten these joints on our own? I remember some was able to do it on a medicom body by tightening the screws all around the body?

Hate to say it, but you're stuck with the body, there's just going to be varying degrees of looseness but they'll all be loose. Unless yours is really unbearable, I suggest holding onto it, replacement risks worse. I replaced my Bespin Luke because the loose wrist was annoying me, the one I got to replace it was even worse.

yes, the superglue trick will work, but it's a bit... complicated. I use d it to fix my asajj figure's floppy wrist. here is the deal, you pick a single joint, put a drop of superglue in the joint and then move the joint constantly untill the superglue dries in the joint, stiffening it, then you move on to the next joint. You've got to make sure to be moving the joint the entire time you're gluing it, or the joint will dry in a frozen pose, and the glue will thus destroy the joint. if my indy is rubber, i'll employ this method. it should be pointed out that this method will only work for the fully exposed joints like the elbows, knees, etc. the mid torso joint will likely be impossible to glue.

 

[Darren Carnall]

seeing as I don't have the funds to buy this just yet, I'm waiting to see someone do what I'm dying to do (apart from repaint that AMAZING sculpt).

I want someone to go outside... get a pile of dust from the ground... maybe some cobwebs.. and dust that fella up!!