Thanks guys, by popular vote, DX13 it is then! Also, I heard HT screwed up the scale with the MMS238, how does the DX13 compare to the DX10 in terms of scale?
I'll surely get the both some day, just having a hard time deciding who's next.
Hey guys, I was wondering- if I were to close off the year with just one more figure, will it be this or the DX13? Which is the superior figure? I have the DX10 and MMS136 but I thought the 136 was superior to the DX10's soft sculpt. Thanks!
If I had to choose, I would get neither of them and instead get the Enterbay 1/4 scale BD T2 T-800. Of course it's 1/4 scale, but if you're looking for a definitive Arnie Terminator, this would be the one. Someone can correct me if I'm off, but the price of the DX-13 on the secondary market is probably close to the cost of the Enterbay by now.
Ok guys, due to popular vote I just bought the DX13. Should be here in 3/4 days.
I saw the EB one and it's great and all, but I don't collect 1/4 scale. I just want more Arnies to go with my Terminator: Sarah Connor Chronicles customs. Plus I got the DX13 cheap, like disgustingly cheap.
If I had to choose, I would get neither of them and instead get the Enterbay 1/4 scale BD T2 T-800. Of course it's 1/4 scale, but if you're looking for a definitive Arnie Terminator, this would be the one. Someone can correct me if I'm off, but the price of the DX-13 on the secondary market is probably close to the cost of the Enterbay by now.
I recently posted a pic of the terminators next to each other... I had the dx10 once, it was almost the same height as the 238...
Think of it in the middle, between dx13 and 238
View attachment 228901
View attachment 228902
But this one might answer your question properly:
View attachment 228910
The Enterbay was on Xmas special yesterday on their international site for about US$320. It's normally 100-120 more than that I think. If I was going for a single definitive Arnie Terminator I'd probably buy it, just as if I was ignoring money and wanted one detailed Iron Man it would be the new HT quarter scale.
Tbh I'd rather have multiple sixth scale figures personally, than one or two really good quarter scales..
Still lovin the fig.
Hey guys, I was wondering- if I were to close off the year with just one more figure, will it be this or the DX13? Which is the superior figure? I have the DX10 and MMS136 but I thought the 136 was superior to the DX10's soft sculpt. Thanks!
ok i made a series of pictures but cannot upload them now. will write an illustrated instruction later todayAny additional info. you can share would be appreciated, P.
Spoiler:0.
black rubber tape.
1.
the start.
2.
fill the gap with a narrow stripe of tape or with everything you want.
3.
put 12 (!) rounds of rubber tape on the neck. not more. i had a cool, thick tape that doesn't stretch. later i bought another, it stretched and became grey, won't use it anymore.
4.
put the head back on and make a cut lower than the hair line. or you won't be able to put the head on later.
5.
cut some of the tape like shown here. it goes from hair line to ears. then take the piece of rubber and put it on neck's bag - it makes the back stronger later. you don't want just a cylinder, you want muscles there.
6.
now two cotton discs are needed.
7.
they are divided in halves. then 2 halves are cut into halves, too. they will be used as written on them.
8.
oh i forgot. another thick piece of tape is put on the back/neck connection, and another layer of tape goes for the neck to make the surface smoother.
9-10.
two shoulder quarters are turned into tubes and covered with tape to make triangle trapezian muscles. i forgot to photo them separately, so i draw one of them inside. view from the back and from the front (so you can see the tapes cross).
Spoiler:11.
chest half cotton piece is put like this...
12.
...and fixed with a tape cross (2 stripes) from chest to shoulders.
13.
back half cotton piece is put upside down.
14.
and fixed with a tape cross as well. don't make both crosses too long or too short.
15.
so that's how it looks now from the side.
16.
now the weird part. boobs implants. no matter what they look like, they are just stickers for furniture legs. they are really helpful, or the chest will simply fall inside in some movements. we repeat the muscle structure of a human body, remember.
17.
a really important part about the t-shirt. it's throat must be stretched. as well as t-shirt on MMS136. both t-shirts had giant throats, and a terminator wore them very inaccurately, asymmetrically.
do it carefully with two hands. every time you do it right, there will be a little click - then move to a next section. don't do that near stitches, but otherwise do it throughout all round.
18.
look how big and hanging it should be. compare it to a movie screenshot if you want.
and as for a medicine bottle in the neck - it does same stretching with rubber neck. do that, too! it will be easier to put it back on the body later. i'd say "slightly easier".
Spoiler:alright, now you just have to put the skin back on the body. it will not be easy. i spent a lot of time pulling it back, because new shoulders don't let it go back easily. on one of the figures i even had to cut 3 mm of the neck's top (i mean the rubber part).
a little ridge on the inside of the rubber chest won't go anymore into its slot on a plastic body. that's ok! don't try to put it there, or the chest will look weirdly.
and the result is what you've already seen. powerful T1 neck, shoulders, chest and back.
this figure actually has 14 layers on its neck instead of 12. i left it only for jacketless variant later. 12 layers are a lot better.
there are no photos for the jacket mod here. jacket's shoulders were changed slightly to have a sharper angle and be firmer. that mod is very easy, i'll make photos later, when i start remaking another figure with a jacket.
several people asked for body mod process/insides photos. here they are.What is the purpose of that mod, p,?
Enter your email address to join: