SSC Superman 1/6th Scale figure

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I guess Supes is stuck in a storage container on the docks. I'm gonna run down there and bust mine out. Anybody want me to grab their's while I'm there?
 
Has anybody tried using the Batman body for a Kingdom Come Superman using the 13" DC suit and sculpt?
Looks like it might work quite well.
 
Has anybody tried using the Batman body for a Kingdom Come Superman using the 13" DC suit and sculpt?
Looks like it might work quite well.

I purchased a DC 13" Ros Bats with the intention of moving the parts to a MOS Supes body but the DC figure is just too huge to work properly. I imagine the KC Supes would be the same.
 
I guess Supes is stuck in a storage container on the docks. I'm gonna run down there and bust mine out. Anybody want me to grab their's while I'm there?

Hell, I'd order one if you could grab it and my Plisskin! :lol
 
Has anybody tried using the Batman body for a Kingdom Come Superman using the 13" DC suit and sculpt?
Looks like it might work quite well.

20141223_111908_zpsuxoqmpgz.jpg


this is the dcd classic supes body suit on a ssc bats body ,fits pretty good ,the mos boots fit on the ssc foot pegs with out modification
 
That's pretty cool!
I once tried using a KP body, and although the suit fit nice enough, the boots were just impossible, so I gave up.
Might have to try again once the SSC Superman gets parted out in order to get the boots.
 
Yeah, that does look good. The head is a bit large. That Ross Bats I have just dwarfed the MOS body. There was no way I could use anything other than maybe the suit if it fit tight enough.
 
thats not the dcd supes head ,its just some random head that i thought had a resemblance to the way alex ross draws supes lol ,i think the dcd supes is slightly smaller than the random i used ,so should after you have cut and hollowed it out to fit the neck of the ssc body should look good and in scale ,at least you know the suits going to look ok on the body ,
 
What a great way to start the year. My 1/6 Superman and Wonder Woman PF are stuck in those containers cause those baggage handlers want more pay to move them. They should be dedicated baggage handlers and do it for the love of the job not the money.
 
strikes are a pain in the ass for sure. my union wants one next week which sucks because i still want the batman armory!? not going to work won't make that happen any sooner....what to do what to do.

anyways back to the thread. will MOS hot toys boots fit on a mattel 12" chris R superman figure? the suit is great, the body is ok-ish but the boots have to go. any ideas anybody?
 
the only way i could see the mos boots fitting on that body ,or any other body that doesn't have the foot peg system ,would be if you glued some foot pegs ,preferably long ones ,to compensate for the mattel ankle section thats not going to be there ,directly in to the hole inside the mattel leg ,not sure if you would need to widen the hole with a drill or dremel ,or if you dont have a dremel or drill you could sand one end of the peg down until it fits and glue it in ,then any peg type foot or boot will fit ,
 
Still kinda wanting this, lol. Better pics will help I'm sure.


Sent from my iPhone using Tapatalk
 
Oh man that looks fantastic , I know I am in the minority when I say this,
but I have been a staunch follower of this since the 1st release and I still think that its going to be great in Hand
can not wait for this . very pleased with the new pics. :)
 
Back
Top