Hot Toys - MMS174 - The Avengers: 1/6th scale Captain America Offical Specs and Pics

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Agreed a 3rd time, your Black Panther Custom rocks ! The Black Panther has got to make it into the next Avengers Movie ,The gate keeper from the Thor film, Edris Alba (if he's no longer used) would be an awesome Panther. Terry Crews from the Expendables would be passable but he's gotta show his real serious side.
 
Here are some shot that I took of my HT Cap which I got of flex pay last week ! These figures are so awesome !



DSCN0564.jpg


DSCN0562.jpg


DSCN0380.jpg


DSCN0568.jpg


DSCN0395.jpg


https://www.flickr.com/photos/hunterd1/
 
Last edited:
Just don't let Cap's biceps or your fingers put too much pressure
on the shield plate while sliding Cap's arm through the strap loops.

If you're using the grip hand, remove the hand from the wrist peg first.
Let the hand grip the strap. Then replace the shield and the hand into the arm.

Also be careful while repositioning his shield arm.
 
I bought the exact same paint for my shield - I'll be doing your mod shortly. Any new developments?

I dropped it the other day on the colour side and it's fine :yess:

Also doing a repaint on a second shield I bought to see if I can replicate the paint job, or improve on it. See my link on my post just a few posts above this. Some peeps are asking questions on my thread and I will let you know what I did and how I did it.
 
I dropped it the other day on the colour side and it's fine :yess:

Also doing a repaint on a second shield I bought to see if I can replicate the paint job, or improve on it. See my link on my post just a few posts above this. Some peeps are asking questions on my thread and I will let you know what I did and how I did it.

Fantastic, thanks! I'll be watching for updates!
 
The Avengers Captain America is a great figure. The suit is pretty screen accurate. I like paint application on the face. Very lifelike. The second picture looks like Cap is asking Batman to pull his finger. Batman is not amused.
IMG_7769_zps68db40ca.jpg
[/IMG]
IMG_4415_zpsa89415f4.jpg
IMG_3124_zps23ae9ea9.jpg
 
I had some Testors Dullcoat lying around so I tried it on a shield that was already chipping that I was going to make into a battle damaged shield. I only did one coat to test it out. It would probably work better for a battle damage shield but for a pristine shield the semi gloss would be the way to go I think. Dullcoat isn't bad either, depends on what kind of look you want.

Natural light, you can see the difference in reflections with the shield next to it.

p1060598yx.jpg


Flash pic, you can see it still retains the spun metal look to the paint which the first picture didn't capture very well.

p1060610.jpg
 
I had some Testors Dullcoat lying around so I tried it on a shield that was already chipping that I was going to make into a battle damaged shield. I only did one coat to test it out. It would probably work better for a battle damage shield but for a pristine shield the semi gloss would be the way to go I think. Dullcoat isn't bad either, depends on what kind of look you want.

Natural light, you can see the difference in reflections with the shield next to it.

p1060598yx.jpg


Flash pic, you can see it still retains the spun metal look to the paint which the first picture didn't capture very well.

p1060610.jpg

Is that shield from Avengers Cap or Cap movie one?
 
Back
Top