IANS HOT TOYS REPAINTS , MODS & DIORAMAS

[IANR]

lucky to get a 1/4 mk3 arm & chestplate for £40 so did a heavily damaged version

 

[IANR]

bunch of rescue parts on ebay for £35 so wired up the array using copper wire party lights , lot of fiddly drilling but looks cool & glows ( just need to hide the battery boxes.

 

[IANR]

CUSTOM 1/6 DIORAMA CAVE BASE FOR HOT TOYS IRON MAN MARK 1 or COWBOYS 18''TALL X 14''WIDE X 8''DEEP X ABOUT 13'' INSIDE. GRAVEL FLOOR, LIGHT ENOUGH FOR DETOLF SHELVES. NOT MOVIE SCALE ACCURATE OR WOULD NEED TO BE 36'' WIDE BUT AN EASILY HOUSED REPRESENTATION.

 

[IANR]

1/6 CUSTOM DIORAMA LANDING BATTLE GROUND FOR HOT TOYS FIGURES DETOLF 14''WIDE X 14.5''DEEP X 13''HIGH. LIGHT ENOUGH FOR GLASS SHELVES BUT LARGE ENOUGH FOR MULTIPLE FIGURES. BROKEN UP PAVEMENT WITH DEBRIS , BROKEN FENCE WITH DEBRIS, WEATHERED & TEXTURED ==NO FIGURES OR PARTS INCLUDED, SMOKE PET FREE HOME ==

 

[IANR]

ABANDONED MANSION ; FROM THE TOP DAMAGED GREY STONE WITH RUSTY REBARS REMOVEABLE BROKEN RAFTERS THEN DENTIL STONEWORK WINDOW LINTEL REAL WOOD WINDOWS BROKEN GLASS & LEAVES ON THE SILLS , BLUE WALLPAPER & PLASTER , DADO RAIL, YELLOW PATTERNED WALLPAPER ON BLOWN PLASTER , ORNATE SKIRTING BOARD, FADED/CRACKED BLUE RED TILE FLOOR WITH DEBRIS, SOLID BASE. WEATHERING POWDERS STREAKING WASHES THROUGHOUT. INCLUDES 3 RAFTERS , 5 PLANKS , 5 TILE PIECES , 5PC PLASTER. GREAT FOR MILITARY OR HORROR ZOMBIES ETC .ABOUT 40 HOURS OF WORK HOPE YOU ENJOY THIS.

 

[IANR]

HI neca 18''midas custom. so i repainted it all to a metallic copper & shiny gold except the pants, gouged out 7 battle wounds from the solid rubber body lined each with a dark fabric ;tonys clothing layer before adding the wire braces & mesh.hinged the shoulder pads so they raise but not rotate. altered the relaxed hands to repulsor & made some fingers show thru. cut down an ebay 1/4 head very tight fit & added back 2 led bulbs wired to 2 x aa batteries along with the other lights .made a large shoulder missile & mini missiles inside the air flaps.

 

[IANR]

with the mk50 accessory pack below £100 why not light up the array ,just remember several coats of black paint to stop light bleeding thru. same with the sword 16 bulbs will fit in but getting it apart is trial & error.

 

[IANR]

various hulkbusters some with accessories all with lights

 

[IANR]

heavily damaged hulkbuster custom ,flashing lights in wrecked arm.

 

[IANR]

for sale ebay uk only 1/6 CUSTOM ASGARD DIORAMA FOR HOT TOYS THOR HELA ODIN ACTION FIGURES. MODULAR SET 9 PIECES INCLUDING 15.25 SQUARE HARDBOARD BASE, CARVED IN COBBLESTONES , GOLD MULLIONS , FADED BLUE WHITE TILED PATH, CURVED PIERS WITH GOLD WINGS SUPPORTING COLUMNS & ARCHITRAVE WITH RUNES THAT READ ''THOR ASGARD ODIN HELA'',SEPERATE BACKDROP OF ASGARD INCLUDED. LIGHT ENOUGH FOR A DETOLF SHELF, BOTH PILLARS & ARCHITRAVE CAN BE CUT DOWN TO FIT YOUR DISPLAY SPACE. I THINK THIS WOULD ALSO LOOK COOL WITH '300' OR THE BLACK ORDER FIGURES. === NO FIGURES INCLUDED, SMOKE PET FREE HOME ===

 

[IANR]

DIORAMA WALL SECTION FOR HOT TOYS FIGURES 24'' X 18'' X 6'' FOR EITHER HULKBUSTER / IRON MONGER OR 1/4 IRON MAN AS SHOWN ( BLUE & WHITE HB IS THE 18'' VERSION )

 

[IANR]

1/6 CUSTOM HOUSE DIORAMA 8''WIDE X 11''DEEP X 16 TO 18''TALL. HARDBOARD BASE ,BROKEN TILE FLOOR & GROUTING , PLANK SUB FLOOR + 1 LOOSE BOARD , JOISTS & SANDY EARTHEN FLOOR, WALL WITH BROKEN WINDOW /GLASS .MISSING PLASTER OVER BRICKS.

 

[IANR]

1/6 CUSTOM DIORAMA REFINERY TUNNEL SPACE STATION FOR HOT TOYS FIGURES 15.75''TALL X 12''WIDE X 12''DEEP (CAN BE MADE TALLER JUST RAISE BACK SECTION) MDF BASE & BACK , FOAM CORE , 3 LARGE METAL PIPES , PLATIC DETAIL PIECES , RUBBER PIPES. I LEFT THIS CLEAN FOR MORE OPTIONS BUT DIRTIED UP WOULD BE GOOD FOR ALIENS & HALO FIGURES

 

[IANR]

1/6 CUSTOM TITAN BATTLE DIORAMA FOR THANOS IRON MAN CAPTAIN AMERICA 30''WIDE X 10''DEEP X 19.5'' TALL. DURABLE HARDBOARD BASE, WELL SEALED TERRAIN , INCLUDES 3 METAL LINED HOLES FOR ACRYLIC OR METAL FIGURE POLES + A THICKNESS ADAPTOR PIECE , BACKDROP PICTURE ROUGHLY 30 X 19 , A BAG OF SMALL MAUVE ROCKS, 6 LARGE ROCKS , 7 FLYING ROCKS ON ARMATURE AS THROWN BY DR STRANGE, 8 PIECES OF WRECKAGE WITH MARKINGS, I USED A VARIETY OF WEATHERING POWDERS TO GIVE THIS AN ALIEN LOOK.

 

[IANR]

i fitted a mk7 tony face into the shades suit to make it more interesting, not too difficult but could use some smaller magnets to hold the mask in place.

 

[IANR]

i repainted the rock sections of my 1/4 spidey as they were a boring grey & added slate near the headpiece , drybrushed silver & gunmetal especially on the rotors & used tamiya clear red on the pink light up pieces. i noticed the clamp was biting into his waist so i now only use it loosely on the leg.

 

[IANR]

tony racesuit with 3rd party head with the transforming suitcase it has a surprising number of display options but the ball joints do loosen with use. diorama made from clothes airer & metal grid.

 

[IANR]

ebay find loose mk5 for £50 so it became my very battle damaged version, always bugs me when the bd stops at a distinct line. the head is from maxnut.

 

[IANR]

this is a repaint of the war machine 2 special edition ( the one without headsculpt ) so because the proper hotrod was so expensive i made this using tamiya clear range ( 3 shades for each colour ) over grey primer then silver base . came out above expectation but i have chipped it several times while dusting.

 

[IANR]

battle damaged armoured batman ,seemed very grey so i added copper/silver scratches ,rips & dust to cape/boots . reglued the shoulders & codpiece, added gold/brass to pouches . drybrushed the weapons & bluing on barrels. diorama from foam with resin green sludge & metal bars bent back on drains.