1/6 Hot Toys - MMS275 -John Blake/ Jim Gordon with Bat-Signal Collectible Set

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Re: 1/6 Hot Toys - TDKR - Batman Spotlight w/ Robin and Gordon (Various Sets)

I knew HT would reuse the Gary Oldman sculpt from SWAT Gordon.

Which is fine as that figure wasn't widely distributed, right? I wonder if it's an "all new paint" job like Bale is supposed to be. At least the sculpt is good - they've done terrible second revision sculpts a number of times already.
 
Re: 1/6 Hot Toys - TDKR - Batman Spotlight w/ Robin and Gordon (Various Sets)

I've been waiting two years for them to reuse that headsculpt.
 
Re: 1/6 Hot Toys - TDKR - Batman Spotlight w/ Robin and Gordon (Various Sets)

I may try and grab an extra DX12 body and bash something like this:

 
Re: 1/6 Hot Toys - TDKR - Batman Spotlight w/ Robin and Gordon (Various Sets)

I may try and grab an extra DX12 body and bash something like this:

SafariMissingImage-01.gif

That's a pretty white question mark inside a blue square. Maybe for some people it's a red X and white square. ;)
 
Re: 1/6 Hot Toys - TDKR - Batman Spotlight w/ Robin and Gordon (Various Sets)

After these two are released, I could definitely go for a Batman Begins Batman, complete with the full DX treatment - a new Bruce Wayne headsculpt and non-wonky ankles.
 
Re: 1/6 Hot Toys - TDKR - Batman Spotlight w/ Robin and Gordon (Various Sets)

Cool, it's Joseph Gordon-Levitt playing Agent Smith from the Matrix, dressed up as Batman. ;)
 
Re: 1/6 Hot Toys - TDKR - Batman Spotlight w/ Robin and Gordon (Various Sets)

I think those are supposed to be Catwoman's nightvision goggles.
 
Re: 1/6 Hot Toys - TDKR - Batman Spotlight w/ Robin and Gordon (Various Sets)

They should at least sculpt him different hair... hate having two of the same sculpts on display.
 
Re: 1/6 Hot Toys - TDKR - Batman Spotlight w/ Robin and Gordon

There's really not much left to do. Other than the TDKR armory, everything that they've teased and hinted at for this license has been done now that Blake is checked off. Sure, they could pull a 2.0, 3.0, 4.0 out of their ass, but for the most part it feels complete (other than Ra's and maybe Fox).

This is all that's left really for 1/6,

- Ra's (gaping hole that needs to be filled)
- Ninja Bruce (depending on what Ra's is like)
- TDKR armory teased
- Fox (Hot Toys was pissed about the Ace Toyz CEO, maybe they had him planned)

- Miranda Tate *shudder* only 4 people would buy


That's it.

Two Face 2.0 is the ONLY figure we need now.
 
Re: 1/6 Hot Toys - TDKR - Batman Spotlight w/ Robin and Gordon (Various Sets)

10565033_10152203303427344_7948742663099606328_n.jpg


Judging from this pic compared to pics from the movie and the original prop, the Batman Spotlight seams a tad to small to me, but in this specific case I could imagine that it could look odd if it was bigger, though it would probably be more accurate.
Think it's not a big deal in this case, as it will not be to visible if posed properly. The weathering looks badass and pretty accurate to the look in TDKR, hope they will look as good as the proto!
 
Re: 1/6 Hot Toys - TDKR - Batman Spotlight w/ Robin and Gordon (Various Sets)

I wonder if it's an "all new paint" job like Bale is supposed to be. At least the sculpt is good - they've done terrible second revision sculpts a number of times already.

It would be good to make him older, with some grey hair, and it would be good to sculpt his hair a bit differently, like in TDKR.
 
Re: 1/6 Hot Toys - TDKR - Batman Spotlight w/ Robin and Gordon (Various Sets)

10565033_10152203303427344_7948742663099606328_n.jpg


Judging from this pic compared to pics from the movie and the original prop, the Batman Spotlight seams a tad to small to me, but in this specific case I could imagine that it could look odd if it was bigger, though it would probably be more accurate.
Think it's not a big deal in this case, as it will not be to visible if posed properly. The weathering looks badass and pretty accurate to the look in TDKR, hope they will look as good as the proto!

:clap:yess:
 
Re: 1/6 Hot Toys - TDKR - Batman Spotlight w/ Robin and Gordon (Various Sets)

It would be good to make him older, with some grey hair, and it would be good to sculpt his hair a bit differently, like in TDKR.

It's going to be a repaint, so same sculpt.
 
Re: 1/6 Hot Toys - TDKR - Batman Spotlight w/ Robin and Gordon (Various Sets)

10565033_10152203303427344_7948742663099606328_n.jpg


Judging from this pic compared to pics from the movie and the original prop, the Batman Spotlight seams a tad to small to me, but in this specific case I could imagine that it could look odd if it was bigger, though it would probably be more accurate.
Think it's not a big deal in this case, as it will not be to visible if posed properly. The weathering looks badass and pretty accurate to the look in TDKR, hope they will look as good as the proto!

Between this and Batman Returns, the Bank Robber Joker 2.0 got pushed...literally...to the background.
 
Re: 1/6 Hot Toys - TDKR - Batman Spotlight w/ Robin and Gordon (Various Sets)

It'll be interesting to see what they do about lighting it up if so. High power LEDs, necessary to make a really convincing spotlight on a semi-distant wall/ceiling, will not last very long on small batteries.

I know what I'd do to modify it. :devil
 
Re: 1/6 Hot Toys - TDKR - Batman Spotlight w/ Robin and Gordon (Various Sets)

It'll be interesting to see what they do about lighting it up if so. High power LEDs, necessary to make a really convincing spotlight on a semi-distant wall/ceiling, will not last very long on small batteries.

I know what I'd do to modify it. :devil

:hi5: Already thought about it a little as well, want to frighten my neighbors!! :lol

I can't see them having it NOT light up.

Would be surprised as well!
 
Last edited:
Back
Top