ENTERBAY 1:4 HD Masterpiece Series - The Dark Knight - Batman Full Specs and Pics

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Truly awesome pose! Be honest - how scared are you of changing it a little and losing it forever? Ha ha! We've all been there. :(

I want to get in there and tinker with that belt! You should lower it dude. All I did was tied some very thin wire through the holes in both openings of the belt at the back. This then keeps it together and allows it to sit wherever you want! Took me about 5 minutes!
 
Truly awesome pose! Be honest - how scared are you of changing it a little and losing it forever? Ha ha! We've all been there. :(

I want to get in there and tinker with that belt! You should lower it dude. All I did was tied some very thin wire through the holes in both openings of the belt at the back. This then keeps it together and allows it to sit wherever you want! Took me about 5 minutes!

to be honest it wasn't that bad at all , O yea i'll try that tip lower the belt !! Thanks for an advice mate ! cheer !!
 
Finally have these two epic figures together :D

1361118096591_zps7e26877b.jpg
 
So happy i picked this up... my first 1/4...
IMG_0234_zps5b397f68.jpg


more bat pics can be seen here...
 
I stuffed the heck out of his upper chest so that I could raise his cowl up but not have the gap between cowl and chest.

Just have to correct the clips now (some days I hate the magnet system and just want to change it to the mod method).
 
Just got mine in from bbts, and wow, the box is huge!. I havent had much time to inspect, but I sid notice a few paint chis on the cowl and the guy wont stand up properly...ill be more thorough tonight
 
Can somene please help me. This figure is driving me nuts, is it suppossef to be able to stand on its own? Also, the kneecap on the right leg is at the kneepad on the suit, but the kneecap of the left leg is higher than the kneepad on left leg...this is so damn irratating.
 
Can somene please help me. This figure is driving me nuts, is it suppossef to be able to stand on its own? Also, the kneecap on the right leg is at the kneepad on the suit, but the kneecap of the left leg is higher than the kneepad on left leg...this is so damn irratating.

can you post some pics for us? I want to see the knee pad you're talking about
my batman can stand just fine without using the stand
 
Mine arrived last week, very happy to report not one problem what so ever.

Well apart from the problem of trying to decide what faceplate to use, they all look great!
 
Anyone know how to fix the leg problems where the left leg doesn't quite want to bend in towards the other leg so that it's straight down?
 
So, I couldnt sleep because it was driving me crazy. Woke up at 5 am, took it out of the box , popped the boots off and measured and remeasured. The legs are not shorter and needed to be adjusted, which was a pain in itself. Another contributing factor is the ankle pegs that need to be pushed all the way in. So now he will stand on his own, granted one foot must be positioned behind the other, but the figure is impressive. Now I need to contact bbts regarding the paint chips on the cowl. I hope its just a matter of only replacing the cowl. The body has a stain, but its in the back of the suit and will be covered by the cape.
 
Back
Top