Action Figure 1/6 Predator P1 Bio Lense with Mesh

Hello all :=)
back from my ideas . is today to show you how easy you can modi
your Bio 1/6 to give it a perfect look.
so many disscusion , over how it looks in movie and how to make it close as possible movie accurate custom .
Here is my answer to that .
The bio you see .
You can order if you like with LED ready to connect... PM me
Lets go now:
You need a piece of Plastic Foil 0,1 mm and
a black piece of cloth
I find it in a cloth shop .

glued in the mask inside


and finaly :=)

Very nice tip, I did a similar job on my classic bio. I popped out the stock plastic lense section, then cut out pieces of a plastic figure clamshell package in the same shape. I used a heatgun to kind of shrink-wrap the clear plastic to the shape of the lense, then pushed it back in place while it was still hot. Holds itself in place, and it looks great.

the normal lense with painted inside was my first try . i think it makes only sense if you look very very close to it then you see the mesh only