Hot Toys - VGM16 - Biohazard 4 HD: Ada Wong

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I seriously need to invest in that. I got all my accessories in ziplock bags and it's not very organized.

The larger container could be anything(Or even a cardboard box, or a drawer), but the smaller ones are "Really Useful Boxes", and are really pretty cheap. I mainly use .07L(https://www.reallyusefulproducts.co.uk/usa/html/onlineshop/rub/b00_07litre.php), .14L(https://www.reallyusefulproducts.co.uk/usa/html/onlineshop/rub/b00_14litre.php), .35L(https://www.reallyusefulproducts.co.uk/usa/html/onlineshop/rub/b00_35litre.php) and .7L(https://www.reallyusefulproducts.co.uk/usa/html/onlineshop/rub/b00_7litre.php) sizes but i have loads of larger boxes for various uses, as seen above. It's the 1.5L(https://www.reallyusefulproducts.co.uk/usa/html/onlineshop/rub/b01_5litre.php) box that has all my weapons in it, and i have two 1.75L(https://www.reallyusefulproducts.co.uk/usa/html/onlineshop/rub/b01_75litre.php) on top for other storage. The main box i have my heads in is an 11L box with an integral(But removable) 6 way divider tray: https://www.reallyusefulproducts.co.uk/usa/html/onlineshop/rub/b11_0litreXLLDT06.php
They are a UK company but they have a US distributor.
https://www.reallyusefulproducts.co.uk/usa/html/boxdetails.php
 
And here is a pic of my gun collection for figures. I am sure it's small by comparison with others on the forum here!


B9040A66-FF0C-45ED-AF1B-409AB1564FF7.jpg
 
Has anyone been able to successfully pop the limbs off of Ada? The arms and legs aren't poping out easily like Hot Toys' other female bodies, and I'm afraid of breaking the joints when I try to pull them out.
 
Yes, I did her arms at the shoulder with some pliers. They're ball joints that pop right out.

Sent from my SM-G920T using Tapatalk
 
"You must spread some Reputation around before giving it to total lightweight FSLAR again."

On some other news... I pre-ordered the new Ada figure today. Not sure if I should have, considering I already have the Ada figure from 2013 :pow
 
Last edited:
Back
Top