S.H. Figuarts Star Wars

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
His right arm constantly falls off at the bicep...
98c451fd36f5cb19726f67984041d5ea.jpg
6f56598bd3f90d2d2d2e2e62b0a04ab2.jpg

Detach the troubled arm from the shoulder socket completely. The problem might be it’s not lining up to the hole of the bicep swivel. From there try to push the bicep
Arm joint all the way in until you hear the crunch or snap. Test it out, good, then snap the shoulder back to the socket

If this is a knockoff, I can’t guarantee anything however, because the parts are cheap on a knockoff :lecture

You might need to heat the joints up before you remove
 
Detach the troubled arm from the shoulder socket completely. The problem might be it’s not lining up to the hole of the bicep swivel. From there try to push the bicep
Arm joint all the way in until you hear the crunch or snap. Test it out, good, then snap the shoulder back to the socket

If this is a knockoff, I can’t guarantee anything however, because the parts are cheap on a knockoff :lecture

You might need to heat the joints up before you remove
Do you mean the entire arm including the ball? Also definitely not a knockoff [emoji16] otherwise I'd be very unhappy with the $60 I paid for it
 
I’ll take any Yoda right now! I want an Empire Yoda but until they start making Episide V figures I’ll take what I can get. Crait Luke is my ideal post Jedi look.
 
I’ll take any Yoda right now! I want an Empire Yoda but until they start making Episide V figures I’ll take what I can get. Crait Luke is my ideal post Jedi look.

If you haven't looked into it yet, the Kotobukiya Yoda and R2 set is amazing. It says 1/10 scale but Yoda is perfect for 1/12.

I'm super excited about the SHF releases anyway.
 
If you haven't looked into it yet, the Kotobukiya Yoda and R2 set is amazing. It says 1/10 scale but Yoda is perfect for 1/12.

I'm super excited about the SHF releases anyway.

I’ve seen that set I think someone sells a cast of it as well, I’m just excited for a fully articulated Figuarts Yoda.
 
Where’s Yoda I didn’t see him in the display :dunno

In the description

『スター・ウォーズ』シリーズより、約100点のアイテムの総力展示!
『スター・ウォーズ エピソード3/シスの復讐』からは、9月発売予定の「S.H.Figuarts アナキン・スカイウォーカー(Revenge of the Sith)」をはじめ、試作を多数公開!そして、ついに待望の「伝説のジェダイ・マスター」も!
さらに、『スター・ウォーズ/最後のジェダイ』からは鮮烈に記憶にきざまれた、ルーク・スカイウォーカーのクレイトでの戦いの姿がついにS.H.Figuartsで立体化。


|Google Translate|


From "Star Wars" series, the total force display of about 100 items!
From "Star Wars Episode 3 / Revenge of Sith", many prototypes are released including "S. H. Figuarts Revenge of the Sith" to be released in September! And finally the long-awaited "legendary Jedi Master" also!
In addition, from the "Star Wars / The Last Jedi", the appearance of battle by Luke Skywalker 's Krato finally cried in memory was finally three - dimensionalized by S. H. Figuarts.​
 
Are we just guessing that Yoda will be from ROTS, though? I see that he's listed after Anakin, but not that he's necessarily from the same film. He could be but I guess we'll know soon.

Sent from my SM-G920P using Tapatalk
 
Are we just guessing that Yoda will be from ROTS, though? I see that he's listed after Anakin, but not that he's necessarily from the same film. He could be but I guess we'll know soon.

Sent from my SM-G920P using Tapatalk

They should just do a giant release and include everything. All prequel and OT looks.
 
Back
Top