Nacho
By demons be driven..
Hi Freaks.
I've had a few forum members recently ask me how I made the
adjustible shelves for my detolf's, so I thought I would start a
thread explaining the process.
This is just one of two mod's i want to show you guys and if
any other freaks want to share their ideas for lighting and other
shelving mod's please post it here.
Thanks
Mod..No#1
For the adjustible shelves you will need some stainless steel rod
5mm thick by 34cm long.
Bend each end at 90 degrees at 17mm in. hope that makes sence.
When you have done this the total length of the rod will now be
30.6 cm long
Now you will need to grind down 3mm at each end to make it flat
Make sure the finished length of the rod is 30cm. The grinding is just
to make ziptieing to the existing rods easier.
Hope this helps you guys.
Ok Mod..No#2
This is a great mod to make your detolf look fkn' sweeeeet
dont know why I didn't do it ages ago.
I pulled my detolf apart today and measured the rear glass panel
and replaced them with mirror.
The total cost for this was $100AUD = $81.47US for the pair.
Here are the exact measurments you will need to give your glazier.
Length = 157.5cm
Width = 38.5cm
Thickness = 5mm
Before & after shots
Now I can see my Berserker at all angles...
Hope these mod's have helped you guys.
Please post any other cool ideas and feel free to ask any questions.
I've had a few forum members recently ask me how I made the
adjustible shelves for my detolf's, so I thought I would start a
thread explaining the process.
This is just one of two mod's i want to show you guys and if
any other freaks want to share their ideas for lighting and other
shelving mod's please post it here.
Thanks
Mod..No#1
For the adjustible shelves you will need some stainless steel rod
5mm thick by 34cm long.
Bend each end at 90 degrees at 17mm in. hope that makes sence.
When you have done this the total length of the rod will now be
30.6 cm long
Now you will need to grind down 3mm at each end to make it flat
Make sure the finished length of the rod is 30cm. The grinding is just
to make ziptieing to the existing rods easier.
Hope this helps you guys.
Ok Mod..No#2
This is a great mod to make your detolf look fkn' sweeeeet
dont know why I didn't do it ages ago.
I pulled my detolf apart today and measured the rear glass panel
and replaced them with mirror.
The total cost for this was $100AUD = $81.47US for the pair.
Here are the exact measurments you will need to give your glazier.
Length = 157.5cm
Width = 38.5cm
Thickness = 5mm
Before & after shots
Now I can see my Berserker at all angles...
Hope these mod's have helped you guys.
Please post any other cool ideas and feel free to ask any questions.
Last edited: