Bat Signal and roof top 1:12

Collector Freaks Forum

Help Support Collector Freaks Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

hemble

Super Freak
Joined
May 25, 2008
Messages
2,538
Reaction score
2
Location
Queensland/Townsville-Australia
Hi All,

Batman - Bat Signal 1:12

Diorama/Display - The roof top is high density foam and I used a sharp pencil to make the brick work and roof top section. I then used a piece of sandstone and tapped over the brick work and roof to give it more realistic look. The Ladder is made using plastic rod and plastic card.

The signal is made from PVC plumbers pipe connections and plastic card and the light is a cheap book light I picked up of ebay. The glass is a piece of clear plastic and the bat logo was done by picking a logo I liked and then I traced it on the soft model plastic and cut it out.

The whole diorama/display was painted and weathered using Vallejo Paints and Pastel chalks.

Ron
 

Attachments

  • bs1.JPG
    bs1.JPG
    173.3 KB · Views: 170
  • bs3.JPG
    bs3.JPG
    159.5 KB · Views: 170
  • bs4.JPG
    bs4.JPG
    163.5 KB · Views: 160
  • bs5.JPG
    bs5.JPG
    162.9 KB · Views: 141
  • bs6.JPG
    bs6.JPG
    166.4 KB · Views: 162
  • bs7.JPG
    bs7.JPG
    158.8 KB · Views: 171
  • bs8.JPG
    bs8.JPG
    166.6 KB · Views: 154
  • bs9.JPG
    bs9.JPG
    157.5 KB · Views: 165
  • bs10.JPG
    bs10.JPG
    144.9 KB · Views: 147
  • bs11.JPG
    bs11.JPG
    155.9 KB · Views: 159
Back
Top