Article: Re: CREEPSHOW starts today!!!

Re: CREEPSHOW starts today!!!

Rzeznikk said:

Almost complete! Im going to reprint the "Most Fun" poster a little larger and I'm playing with the idea of adding the logo on top ...View attachment 427823View attachment 427824

Sent from my SM-G955U using Tapatalk

Click to expand...

Damn, that is truly amazing! Fantastic work. I had to check out the Fattel website, and now I have to have one of their skeletons! lol

Teaser:

clutch said:

Teaser:

View attachment 431758

Click to expand...

Nice! [emoji122][emoji122][emoji122][emoji122]

Sent from my SM-G955U using Tapatalk

Not that this means anything, but CREEPSHOW is getting a 4K release from Shout Factory. 4K scan from the original negative and it'll be filled with tons of extras for the CREEPSHOW fan in all of us.

DeltaForceChung said:

Not that this means anything, but CREEPSHOW is getting a 4K release from Shout Factory. 4K scan from the original negative and it'll be filled with tons of extras for the CREEPSHOW fan in all of us.

Click to expand...

It's a sexy set! I watched it on Thurs. The movie has never looked better! Beautiful transfer! I got the set with the poster and lithograph. I need to get frames for them so I can display them proper.

Sent from my SM-G955U using Tapatalk

It has been slow going. Had my kitchen and half of the other rooms flooded when my filtration system busted. Needless to say I have been ripping up my beautiful hardwood flooring. . Anyway just a little update on the wall hanger:

clutch said:

It has been slow going. Had my kitchen and half of the other rooms flooded when my filtration system busted. Needless to say I have been ripping up my beautiful hardwood flooring. . Anyway just a little update on the wall hanger:

View attachment 434615

Click to expand...

Hey that looks familiar! [emoji6][emoji23] [emoji106][emoji106]

Are you doing the whole booth with skeleton? Look forward to seeing it all done!



Sent from my SM-G955U using Tapatalk

Lol! Yep. That's the plan. If I had it to do over again, I'd probably do the background in grays/blacks. The logo disappears a little with the red on red.

clutch said:

Lol! Yep. That's the plan. If I had it to do over again, I'd probably do the background in grays/blacks. The logo disappears a little with the red on red.

Click to expand...

Cool. Which Skeleton you going with? Fattel?

Sent from my SM-G955U using Tapatalk

I'm gonna 3d print one and modify it so that it has all that dead skin on it.

clutch said:

I'm gonna 3d print one and modify it so that it has all that dead skin on it.

Click to expand...

Cool. Look forward to seeing it!

Sent from my SM-G955U using Tapatalk

Re: CREEPSHOW starts today!!!

That is ****ing cool.

Sent from my SM-N950U using Tapatalk

Re: CREEPSHOW starts today!!!

Are you selling those?

Sent from my SM-N950U using Tapatalk

Re: CREEPSHOW starts today!!!

Sent from my SM-G975U using Tapatalk

Re: CREEPSHOW starts today!!!

Did a fun new video of my Custom Creepshow Cover Art Figure! Enjoy!

https://youtu.be/drsr95avPqU

Sent from my SM-G975U using Tapatalk

Not sure if this has been mentioned before. Just ordered it ($29.99 at Amok Time). Would rather have something bigger and with real fur, but this will have to do for now.

Man I like that Crate monster. My question is will it be compatible with 7" scale Necas (I know he's 3.75 scaled, I'm concerned about the crate itself). I don't care about the size of the creature (he's not so good looking) as I would display him peeking out.

About time I start working on the Creepshow wall hanger again. The delay is due to the fact that it dragged me into the world of 3D printing. I have learned just about everything there is to know about FDM printing and I have a printer that can print near flawlessly now with all my mods. However the one thing that it will always struggle with is fine detail.

I tried everything I could to squeeze that detail in but it just couldn't cut it so I have taken the leap and bought an SLA printer that prints using resin. I'm a little quick to post this but here is my first try. It is the one on the left. The one on the right is with the FDM printer using PLA filament. I had to print the skullcap as a separate piece due to the limitations of the printer. Another reason resin printing is the right tool for this type of work.

After all these years . . . this discussion still continues.

Out of curiosity, what is the current status of "Dooley" and did anyone else supposedly manage to get their figure . . . or anything else from Dooley?

DeltaForceChung said:

After all these years . . . this discussion still continues.

Out of curiosity, what is the current status of "Dooley" and did anyone else supposedly manage to get their figure . . . or anything else from Dooley?

Click to expand...

Nope. And Dooley can hang on a rope for all I care.

Sent from my SM-G975U using Tapatalk