PDA

View Full Version : 1:6 scale, men's wedding ring?



Pennyworth
09-19-2013, 10:49 AM
Need help finding a 1:6 scale, men's wedding band. I have one from my kit that entropy made a while back but I'm in need of another.

(attempted to contact entropy but no luck)

http://i496.photobucket.com/albums/rr327/entropychicken/IMG_0610.jpg

Anyone have ideas on where to get one, make one, etc?

Pretty simple detail but has proven difficult to find....thanks in advance :duff

menoseloso
09-19-2013, 05:29 PM
There's a DiD General Patton set that has two rings which is what I use for my Grimes. They pop up on eBay a good bit. If not there try TA, blackops, etc.

Mr. EcKo
09-19-2013, 05:36 PM
They are easy to make , i have a bunch of brass rings , they just have to be bent outwards so you can get it on the finger

Pennyworth
09-20-2013, 05:15 AM
There's a DiD General Patton set that has two rings which is what I use for my Grimes. They pop up on eBay a good bit. If not there try TA, blackops, etc.

Thanks for the tip man, keeping my eyes out for that set.


They are easy to make , i have a bunch of brass rings , they just have to be bent outwards so you can get it on the finger

Cool. Any advice on where to get em? Craft store?

shocktrooper_au
09-20-2013, 06:24 AM
Brass pipe from any hobby stor then cut it down

Pennyworth
09-20-2013, 07:21 AM
:hi5: thanks man - I'll try Michael's.

Fangs of Death
09-20-2013, 05:32 PM
Strip of metal (lead) tomato paste tube. The inside is gold coloured!

annihilate22
09-24-2013, 11:08 PM
There was one included with a DID figure. Try checking the completed listings on ebay with keywords 1/6 ring DID or 1/6 ring.

Terminator_Fan_Game
10-06-2013, 08:33 AM
One idea I have is to get 1mm Aluminum wire.
Cut it to the length needed(About 10mm)
Place it under something, and then hammer it flat...not too much though.
Wrap it around a 3mm rod, precision screwdriver, or drill bit etc to get the shape.

Pennyworth
10-08-2013, 07:18 AM
Thanks for the ideas all :duff

I went to Michael's crafts and looked for some brass pipe - no luck. But I did find these grommet things that had the diameter I was looking for. I dremeled off the larger end and sanded down until it was scale. Worked out pretty good for $2 and 10 minutes:

http://img542.imageshack.us/img542/3981/8l4i.jpg

:yess:

annihilate22
10-08-2013, 07:40 AM
How about this ?

http://www.ebay.com/itm/DID-1-6-President-of-Russia-Vladimir-Vladimirovic-Putin-Hand-w-ring-DD032G-/390672519201?pt=US_Action_Figures&hash=item5af5e59021

Pennyworth
10-08-2013, 07:45 AM
I actually need the ring for a left hand (the hand in the photo was just used to check for size) so if the ring came off, that Putin hand would work.
Still though, for the time and money I spent, I'm content.

Kid_A
10-18-2013, 02:30 PM
Check the interest threads. Someones doing a run of real gold and white 1/6 rings.

Rdeezy
10-18-2013, 02:36 PM
Here's the thread. They're real 14k white or yellow gold

http://www.sideshowcollectors.com/forums/showthread.php?t=135344