PDA

View Full Version : Hot Toys – MMS202D04 - 1/6th scale RoboCop Collectible Figure



Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [40]

snoop101
09-06-2017, 06:37 PM
Did you buy the Delorean? The thoughts of spending a grand on that (after shipping and customs) made me sell Marty, much as I loved that figure. I just couldn't conceive of having Marty but not his car.

I forgot Prime 1 had the Terminator license. We'd be talking about statues though right?

No. I really wanted the delorean too, I just wouldn't have anywhere to put it. I might get a smaller version, maybe the floating delorean by kids logic or something along those lines. Marty is one of those rare characters where he looks better with either the car or Doc beside him, on a shelf alone it just doesn't have the same effect.

Yes it would most likely be 1/3 statues. I'm hoping for a chrome endoskeleton, you can never have to many of those. :lol Do you collect statues? I don't remember if you do or not.

a-dev
09-06-2017, 06:56 PM
Every now and then I add Marty back into my watch list on ebay. It was tough letting him go and to this day I'm not sure I made the right decision really because every time I watch those films or hear The Power of Love playing in the pub.....:monkey2

I don't collect statues, no. That DAM toys T-800 caught my attention but I think it would be a very idea for me to branch out into statues at this point.

creasy
09-09-2017, 09:11 AM
Anyone in the uk selling a robocop?


Sent from my iPhone using Tapatalk

kaan
09-22-2017, 06:17 AM
I bought this locally in Turkey yet it arrived (in my opinion)used and broken, it was clear the shipping box had seen some shipping, yet I hoped the figure would be pristine, however, it's neck was broken, hands had wear and so on - the shop says it wasn't a returned figure, which is interesting

Overall it was a shocking experience, beforehand, I was really really really looking forward to a Robocop, yet, after this experience, I don't know, having second thoughts, they are going to send another figure, this time pristine

The figure felt bad, I don't know whether it's because of the above situation or whether it's just the way it is - the legs were clumsy, the feet were weak, but granted, I didn't spend much time with the headless figure, just re-packed it and sent it back. I also wonder whether the broken neck is a chronic issue, by neck, I mean the part where the ball of the head sits in

I guess I'm looking for some support, shall I just move on from Robocop or re-try with another one?

Edit: Got more information from the seller, it seems their distributor here sent it to them as unused while it was a display item, which explains things

P.
09-22-2017, 06:55 AM
I guess I'm looking for some support, shall I just move on from Robocop or re-try with another one?
what you got is a unique case of ****up. i have... well, more than one of these figures and never experienced anything like that.

Dark_Spidey
09-23-2017, 09:17 AM
Hey guys

Thought I'd share this 1987 Robocop full repaint I'm working on.

I've been repainting a lot of Robocop figures ever since the HT one came out but this is the first time I've worked on a full repaint.
Did my best to match the look from the movie
The whole figure will be painted like this https://uploads.tapatalk-cdn.com/20170923/71fdb13ad6b99737f7304badf884b931.jpghttps://uploads.tapatalk-cdn.com/20170923/43a73ba2d82a7381b149bf5a62b7d085.jpghttps://uploads.tapatalk-cdn.com/20170923/829ad59b4acef7d890bd65ef467e2192.jpg

Envoyé de mon SM-A510F en utilisant Tapatalk

Dark_Spidey
09-26-2017, 04:46 AM
Fully repainted WIPhttps://uploads.tapatalk-cdn.com/20170926/c08fdc8ee8109da6fba0b985bc30a794.jpghttps://uploads.tapatalk-cdn.com/20170926/477783e476b5cc0ecb8ecfe92993cd21.jpghttps://uploads.tapatalk-cdn.com/20170926/c4976864d10ae4fbfc68f52bf03d5f90.jpg

Envoyé de mon SM-A510F en utilisant Tapatalk

P.
09-26-2017, 05:13 AM
don't know about others, but i'm silent and don't even comment on those pics because just seeing them makes me envious and wanting to forget i ever saw them :panic:
must love my robocops as they are mustlovemyrobocopsastheyare.

EndoSickness
09-26-2017, 05:41 AM
don't know about others, but i'm silent and don't even comment on those pics because just seeing them makes me envious and wanting to forget i ever saw them :panic:
must love my robocops as they are mustlovemyrobocopsastheyare.

2nd :lol
(Dope work, DS. Sorry, words don´t do it justice!!)

Dark_Spidey
09-26-2017, 02:49 PM
don't know about others, but i'm silent and don't even comment on those pics because just seeing them makes me envious and wanting to forget i ever saw them :panic:
must love my robocops as they are mustlovemyrobocopsastheyare.Time to throw them away hahahttps://uploads.tapatalk-cdn.com/20170926/14ade5267b6295045df5700233529e07.jpg

Envoyé de mon SM-A510F en utilisant Tapatalk

kaan
09-27-2017, 07:12 AM
I got my replacement and with a Docking Chair this time! :D

It was a nice upgrade

0 regrets on the Robocop, and the chair was awesome too, most detailed piece I have so far, pictures online doesn't make it justice

P.
09-27-2017, 03:06 PM
just don't leave Robocop sitting in that chair. his butt sticks to it, losing paint.

kaan
09-28-2017, 03:41 AM
just don't leave Robocop sitting in that chair. his butt sticks to it, losing paint.

That's an awesome advice, in that case, I guess no figure should sit on it?

I was going to lend the chair to my brother who was planning to sit Deadpool on it

P.
09-28-2017, 03:44 AM
That's an awesome advice, in that case, I guess no figure should sit on it?nope. it's a different problem: Robocop shouldn't sit at least on two materials i know: his chair and that fabric piece that is used for cleaning glasses (a cheap one, most probably synthetic).
i used it to cover a sit for my BD Robocop, and he had the same trouble as the clean Robocop. so two materials are confirmed cases of trouble.

fiveainone
10-01-2017, 05:08 PM
I wish they gave that purplish hue on the whole body instead of just the limbs.

I'm using some purple lights to display it.. slight improvement without repainting:
https://i.imgur.com/w2g4dUr.jpg

And with some Photoshop trying to recreate the siren lights from the poster..
https://i.imgur.com/S74Hsiu.jpg

a-dev
10-01-2017, 05:39 PM
Oh, beautiful shots. Great looking pose

Jameson Rook
11-02-2017, 11:50 PM
I was wondering- is anyone crazy enough to have 4 Robocops on display? As in Murphy, Robo, Semi BD Robo and BD Robo? I have them all but the Robo with Chair set is still MIB, was thinking of opening it to display as the semi BD look.

P.
11-02-2017, 11:56 PM
I'm using some purple lights to display it.. slight improvement without repainting:
https://i.imgur.com/w2g4dUr.jpg

And with some Photoshop trying to recreate the siren lights from the poster..
https://i.imgur.com/S74Hsiu.jpg

when i see such photos, i sometimes cannot even believe i own the same figure. yeah, it's beautiful by itself, but these really show the best in him.
love the photoshopped result and the pose.


I was wondering- is anyone crazy enough to have 4 Robocops on display? As in Murphy, Robo, Semi BD Robo and BD Robo? I have them all but the Robo with Chair set is still MIB, was thinking of opening it to display as the semi BD look.
who would be so crazy to display more than 4 variants!
i display 9, and a 3rd Murphy is still in the box, he will be 10th. but i'm a known wacko.

Jameson Rook
11-03-2017, 12:31 AM
who would be so crazy to display more than 4 variants!
i display 9, and a 3rd Murphy is still in the box, he will be 10th. but i'm a known wacko.

I meant anyone except P.! :monkey3

Do you have pics of the display? :lol

P.
11-03-2017, 12:46 AM
nope. for some reason my pics turn out ******.
that's why i stopped posting photos some time ago. i don't like how they turn out. fitting only to boast numbers, which is not the intention.
but if you are ok with just some random overall photos with a flash, here they are.

https://i.imgur.com/3Izr9ed.jpg

https://i.imgur.com/T4aWL15.jpg

https://i.imgur.com/TllQFDT.jpg

https://i.imgur.com/e27UQQ1.jpg

managed to use every face expression, that was actually the intention behind buying multiples. and helmetless headsculpt was just too beautiful to have only one.

yeah i have no space :slap even stopped buying figures because of that.

Snake Plissken
11-03-2017, 05:51 AM
I'm using some purple lights to display it.. slight improvement without repainting:
https://i.imgur.com/w2g4dUr.jpg

And with some Photoshop trying to recreate the siren lights from the poster..
https://i.imgur.com/S74Hsiu.jpg

Wow, those lights really bring out what could of been.

Cutter77
11-03-2017, 11:44 AM
I was wondering- is anyone crazy enough to have 4 Robocops on display? As in Murphy, Robo, Semi BD Robo and BD Robo? I have them all but the Robo with Chair set is still MIB, was thinking of opening it to display as the semi BD look.

Yep!.:lol


375390

a-dev
11-03-2017, 12:23 PM
I've got

-Murphy in full cop gear
-Seated Robo
-Standing Robo
-ED-209 battle Robo
-Full BD Robo.

It has been my intention to buy another Robo/Murphy 2 pack so as to create Alex Murphy without his cop helmet on (and doing the gun twirly thing) and finally the full BD look for Robocop before he takes his helmet off (P. has that). I already have the extra MMS202 parts needed to do this but haven't gotten around to buying another BD figure set.

Jameson Rook
11-03-2017, 07:15 PM
And I thought I was crazy! Thanks for the input everyone!

Eukalyptus
11-04-2017, 12:06 PM
I have

Alex Murphy w/o helmet, gun twirling
Alex Murphy in full body armor
Regular Robocop
ED-209 Damage Robocop
SWAT Team damage Robocop
Battle Damaged Robocop w/o helmet
Regular Robocop w/o helmet
Regular Robocop with gun arm attachment

As well as 2 ED-209 and three Enterbay Robocop.

Now who's crazy

a-dev
11-04-2017, 02:03 PM
Impressive.

I presume that's one clean ED-209 and one with battle-damaged arm. The Enterbay Robocop...one has got to be standard Weller Robocop, another with the jetpack and gun-arm and the third with the battledamaged chest and using the Burke headsculpt?

csutkakoma
11-04-2017, 03:22 PM
Guys is it okay to pose the figure with bended arms and legs? I see a lot of you did that. I am asking this because some guys said the rubber part of the figure cracked after a while. I don't want to risk it.

Eukalyptus
11-04-2017, 04:33 PM
Impressive.

I presume that's one clean ED-209 and one with battle-damaged arm. The Enterbay Robocop...one has got to be standard Weller Robocop, another with the jetpack and gun-arm and the third with the battledamaged chest and using the Burke headsculpt?
Correct on the ED, not soooo much on the EB. Part 1 „nakedness“, part 2 battle damaged chest and helmet and part 3 with jet pack and gun arm. All Weller mouth pieces. Who‘s that Burke you‘re talking about?

Eukalyptus
11-04-2017, 04:35 PM
Guys is it okay to pose the figure with bended arms and legs? I see a lot of you did that. I am asking this because some guys said the rubber part of the figure cracked after a while. I don't want to risk it.

Better not. I‘ve got the arms and knees bend to the point where the rubber still gives in and is not stretched completely.

csutkakoma
11-06-2017, 03:20 AM
Better not. I‘ve got the arms and knees bend to the point where the rubber still gives in and is not stretched completely.

Thank you very much! I wont bend them than.

P.
11-06-2017, 05:30 AM
http://www.sideshowcollectors.com/forums/attachment.php?attachmentid=375390&d=1509734500for how long had your Robocop already been in that chair and what happens where his butt touches the seat?
i wonder if only my robocops were defective and sticking to anything i sit them on. or mine and another guy's, who spotted that effect first, making me check mine.

Cutter77
11-06-2017, 01:13 PM
for how long had your Robocop already been in that chair and what happens where his butt touches the seat?
i wonder if only my robocops were defective and sticking to anything i sit them on. or mine and another guy's, who spotted that effect first, making me check mine.

A few years now. There’s a small mark on the back of both legs where they stuck to the chair but as it will only ever be displayed in the chair I’m not going to let it bother me.

P.
11-06-2017, 03:00 PM
thanks. so it's the paint reacting with everything.
i was afraid that said spots would spread further if left on a chair.

sallah
12-03-2017, 12:47 PM
Finally picked this guy up after cutting back on my Hot Toys collecting a couple years back. :) Really glad I did- I love him!

Quick question- Any issues with the rubber elbow coverings known as of yet? Should I treat them with something? Thanks in advance!

Sallh

fiveainone
12-03-2017, 02:22 PM
Better not. I‘ve got the arms and knees bend to the point where the rubber still gives in and is not stretched completely.

Arg. I had no idea about the rubber. I better check mine.

sallah
12-03-2017, 02:34 PM
Arg. I had no idea about the rubber. I better check mine.

Ah... So there has been evidence of it cracking over time? Ugh.

I bought some Honda silicone grease that folks recommend for the Ed-209. Has anybody treated Robo's elbows with it?

Sallah

Eukalyptus
12-03-2017, 11:06 PM
Ah... So there has been evidence of it cracking over time? Ugh.

Sallah

I don‘t think so. Just when overstretching over a prolonged period.

sallah
12-04-2017, 05:17 AM
I don‘t think so. Just when overstretching over a prolonged period.

Ok good to know... Thanks!

Any issues with the metal paint reacting with the stand? It doesn't seem like it will sit naturally on the stand without the metal cradle portion touching the silver. All the stories of the silver paint sticking to stuff has me worried to leave it like that.

Sallah

Timemeddler
12-13-2017, 03:13 AM
Finally got mine posed up with his battle-damaged alter-ego and ED-209. Love these figures!!

382377

P.
12-13-2017, 04:09 AM
Any issues with the metal paint reacting with the stand? It doesn't seem like it will sit naturally on the stand without the metal cradle portion touching the silver. All the stories of the silver paint sticking to stuff has me worried to leave it like that.
Sallah
sitting on a stand without the metal cradle portion touching the silver... voila!

https://i.imgur.com/uz0naHN.jpg

https://i.imgur.com/QOKR3CY.jpg

https://www.e-moticone.com/emoticone/fantastique/fantastique22.gif

yeah i know you asked about standing figures, and yes they can and do stand like that as well.

Jameson Rook
12-19-2017, 11:46 PM
Finally decided to display my RoboChair- does anyone know if leaving him in the siting position would damage the body/rubber sleeves overtime?

https://farm5.staticflickr.com/4590/38291996345_c9a4f34e5c_b.jpg

P.
12-20-2017, 12:15 AM
does anyone know if leaving him in the siting position would damage the body/rubber sleeves overtime?
i do know that the chair will heavily damage his metal paint over a very short time.
this (http://www.sideshowcollectors.com/forums/showthread.php?t=128352&p=9113700&viewfull=1#post9113700) is how i try to avoid that.

Jameson Rook
12-20-2017, 01:25 AM
i do know that the chair will heavily damage his metal paint over a very short time.
this (http://www.sideshowcollectors.com/forums/showthread.php?t=128352&p=9113700&viewfull=1#post9113700) is how i try to avoid that.

Nasty. I guess I could wrap the parts that touches the chair with a thin microfiber cloth then. Any issues with the elbow/knee rubber sleeves?

P.
12-20-2017, 02:13 AM
Nasty. I guess I could wrap the parts that touches the chair with a thin microfiber cloth then.
you could. but, as i write in my post, my BD Robocop got stuck to microfiber suede cloth used for glasses cleaning - exactly what you're going to do :lol so you can try and risk.
so i raised both my sitting robocops in a way they don't touch surfaces with both their metal-painted hips and back. just in case.

Any issues with the elbow/knee rubber sleeves?afraid to check and see any, to be honest.

csutkakoma
12-21-2017, 08:41 AM
Any issues with the elbow/knee rubber sleeves?

Yes the rubber will definitely crack.

Snake Plissken
12-21-2017, 10:17 AM
Finally decided to display my RoboChair- does anyone know if leaving him in the siting position would damage the body/rubber sleeves overtime?

https://farm5.staticflickr.com/4590/38291996345_c9a4f34e5c_b.jpg

Great display! Still a collection of the creme of the crop from HT in recent years.

Jameson Rook
12-21-2017, 10:23 AM
Great display! Still a collection of the creme of the crop from HT in recent years.

Thanks Pliss! Again, I blame you for kickstarting my love for multiples of the same figure. My wallet and I were doing just fine with ONE Terminator. :mad:

Snake Plissken
12-21-2017, 11:01 AM
https://i.imgur.com/pXD11To.gif

The Skull
12-21-2017, 12:10 PM
Yeah the chair thing is disappointing, it would be nice to sit him in it, but it will ruin the figure which is lame, I just stand mine in front:/

Manannin
12-21-2017, 12:28 PM
Does anybody have an unmasked Robo head (the BD headsculpt) they would consider selling? :)

RIDDICK
12-21-2017, 03:19 PM
unmasked Robo head (BD headsculpt)

consider selling?

https://media.tenor.com/images/6e97569ac4e2cf27dbdca85a2f4b11b5/tenor.gif

P.
12-21-2017, 03:42 PM
yeah i highly doubt that. they are going for half of a complete figure's price today. HT could make big money by selling them separately.

Manannin
12-21-2017, 05:37 PM
:rotfl I knew it was a long shot but worth asking. There’s always somebody selling up (and then regretting and rebuying, but that’s another story)

Edit: got one!

Snake Plissken
12-27-2017, 08:37 AM
Does anybody have an unmasked Robo head (the BD headsculpt) they would consider selling? :)

Here's a reasonably priced one. No need to thank me.

https://www.ebay.com/itm/Hot-Toys-MMS26-ROBOCOP-Gun-Arm-Version-Figure-1-6th-Scale-HEAD-SCULPT/201884765808?hash=item2f01450e70:g:mwwAAOSwpP9Y6Ml m

Positron
12-27-2017, 01:50 PM
Here's a reasonably priced one. No need to thank me.

https://www.ebay.com/itm/Hot-Toys-MMS26-ROBOCOP-Gun-Arm-Version-Figure-1-6th-Scale-HEAD-SCULPT/201884765808?hash=item2f01450e70:g:mwwAAOSwpP9Y6Ml m

Thanks for the link! :wink1:

Jameson Rook
12-27-2017, 09:51 PM
Here's a reasonably priced one. No need to thank me.

https://www.ebay.com/itm/Hot-Toys-MMS26-ROBOCOP-Gun-Arm-Version-Figure-1-6th-Scale-HEAD-SCULPT/201884765808?hash=item2f01450e70:g:mwwAAOSwpP9Y6Ml m

Looks like white Dwayne Johnson.

creasy
01-28-2018, 05:29 AM
Anyone in the U.K. looking to sell or trade one of these?


Sent from my iPhone using Tapatalk

Plastic Bateman
01-30-2018, 04:59 AM
Here's a reasonably priced one. No need to thank me.

https://www.ebay.com/itm/Hot-Toys-MMS26-ROBOCOP-Gun-Arm-Version-Figure-1-6th-Scale-HEAD-SCULPT/201884765808?hash=item2f01450e70:g:mwwAAOSwpP9Y6Ml m

That really hammers home how much Hot Toys and a few other companies have raised the bar over the last decade, doesn't it?

Saintv1
02-13-2018, 09:59 PM
I have a Legend Studio display case and a couple of their Light Bases as well that I use. Unfortunately, I only have blue,
green and white lights for them. I really want some red ones so I can light Robo in red and blue--but Legend doesn't seem to make the light bases anymore. I haven't been able to find red ones anywhere.
393523

creasy
02-14-2018, 03:07 PM
I have a Legend Studio display case and a couple of their Light Bases as well that I use. Unfortunately, I only have blue,
green and white lights for them. I really want some red ones so I can light Robo in red and blue--but Legend doesn't seem to make the light bases anymore. I haven't been able to find red ones anywhere.
393523

The blue looks great on robo.
There’s a legends display box on eBay uk at the moment but I think it’s a white light.
I never realised they made different coloured versions


Sent from my iPhone using Tapatalk

Snake Plissken
02-14-2018, 03:50 PM
If only we had gotten a Clarence...

ebor
02-14-2018, 04:20 PM
If only we had gotten a Clarence...

...I would have used the spiked hand to stick in his eye...

dukefett
03-28-2018, 12:20 AM
I'm looking to get these sets and saw the discussion about having 3 Robop cops: Robo, Semi BD Robo and BD Robo.

I know of the HT Robocop with chair set, and the HT BD Robocop and Alex Murphy set. Is there another release, or is the semi-BD Robo you're mentioning just the parts of the chair set Robocop?

P.
03-28-2018, 02:06 AM
I'm looking to get these sets and saw the discussion about having 3 Robop cops: Robo, Semi BD Robo and BD Robo.

I know of the HT Robocop with chair set, and the HT BD Robocop and Alex Murphy set. Is there another release, or is the semi-BD Robo you're mentioning just the parts of the chair set Robocop?there is no other release except for standart robocop without chair and damaged robocop without human Murphy.
chair set has interchangeable chests - intact and slightly damaged - and interchangeable helmets (same).

dukefett
03-28-2018, 09:11 AM
there is no other release except for standart robocop without chair and damaged robocop without human Murphy.
chair set has interchangeable chests - intact and slightly damaged - and interchangeable helmets (same).

Ok cool thanks, so those 2 sets will round out the collection. Sounds great!

RIDDICK
04-03-2018, 07:08 AM
Robop cops :lol

csutkakoma
04-04-2018, 01:54 AM
Guys a question. Now that the Enterbay and Hot Toys RoboCop are out which one is better overall by the look? There was a debate before the HT one came out about the color of the 1/4 Robo but the Hot Toys one turned out bad. A dull silver finish. I have a Hot Toys version but I am thinking about getting the big boy and sell the small guy. What do you guys think? Also there are two Weller face for the Enterbay which is good.

Badvermin
04-04-2018, 01:04 PM
Guys a question. Now that the Enterbay and Hot Toys RoboCop are out which one is better overall by the look? There was a debate before the HT one came out about the color of the 1/4 Robo but the Hot Toys one turned out bad. A dull silver finish. I have a Hot Toys version but I am thinking about getting the big boy and sell the small guy. What do you guys think? Also there are two Weller face for the Enterbay which is good.

I own both, the Enterbay version is FAR superior. BBTS had it for $200, not sure if any are left.

a-dev
04-04-2018, 01:23 PM
I would disagree with Badvermin there and I also own both. The general quality of the Hot Toys is better, as are the display options. Not that Enterbay is weak on display options - just they're from Robocop 3.

It comes down to size. Do you want a big Robocop...or a really big Robocop?

csutkakoma
04-04-2018, 02:26 PM
True but the clean robo look with the Weller face is enough for me. So probably I will buy it. A dev regarding the color. You have both...which one is more movie accurate color wise?

Anyway thanks guys.

a-dev
04-04-2018, 02:42 PM
True but the clean robo look with the Weller face is enough for me. So probably I will buy it. A dev regarding the color. You have both...which one is more movie accurate color wise?

Anyway thanks guys.

Neither has an accurate paintjob but I think I'd give it to Enterbay for having something of a blueish tint which, accurate or not, just looks better than silver.

When you're used to the Hot Toys be prepared for the Enterbay figure to be light and plasticky feeling.

P.
04-04-2018, 04:01 PM
I own both, the Enterbay version is FAR superior.
in centimeters only.

Jameson Rook
04-04-2018, 08:15 PM
At least the EB one has much better colors. The stock paint on the HT totally ruins what could have been one of the best HT figures ever made, that's for sure.

csutkakoma
04-04-2018, 11:42 PM
Thank you guys for the help :). I will buy the enterbay one.

Positron
04-05-2018, 11:56 AM
Thank you guys for the help :). I will buy the enterbay one.

You wont regret it. The Enterbay Robocop has awesome shelf presence.

csutkakoma
04-05-2018, 12:55 PM
I just ordered it from Evilbay! 1 week if everything goes well. Can't wait! :)

a-dev
04-05-2018, 01:21 PM
Congrats. Maybe don't sell the Hot Toys one yet. That way you can compare them in person and decide what you want to do.

Positron
04-05-2018, 03:36 PM
Also do not sell the Hot Toys figure. It's a great figure as is for 1/6 scale.

jlyc
04-06-2018, 01:54 PM
Also do not sell the Hot Toys figure. It's a great figure as is for 1/6 scale.

Side by side, the paint on EB is far superior and unless you are one of those collectors who really care about how heavy a figure is when held, it's impossible to tell the EB is light as it is from looking at it. Overal proportion on the EB is better as well IMO, I think the chunky thighs make it look more balanced.

Put it this way, the EB Robocop weighs way less than my 1/4 Mcfarlane Robo but there is no mistake which one is the cheap figure here. The only time I care about weight is when I buy gold bars.

csutkakoma
04-07-2018, 12:22 PM
Well I already sold my Hot Toys Robo. I loved it but I only have room for one RoboCop. And he will have company. The Enterbay BD T-800.

Badvermin
04-07-2018, 02:38 PM
True but the clean robo look with the Weller face is enough for me. So probably I will buy it. A dev regarding the color. You have both...which one is more movie accurate color wise?

Anyway thanks guys.

I might be very biased as I was able to get the Enterbay version for $200.

The Enterbay comes with a Weller face and the color and sculpts are far more accurate. I haven't had any quality issues. Even though the electronics were said to be gone, everything worked perfectly. Plus this version comes with a ton more accessories and display options.

IMO, the only pluses for the HT version are the inclusion of metal parts and articulated fingers.

The only reason I haven't sold mine is that it scales with the ED209.

a-dev
04-07-2018, 04:33 PM
Robocop 1 BD parts and 4 Weller mouth variants, all of which are well done...and the chair if you went for that version...and overall better articulation and range of motion. What they did for the shoulders and hips was very clever.

OM1D
04-07-2018, 10:16 PM
it scales with the ED209.

Besides all its pros, this is the main reason I never even looked at Enterbay's version.

csutkakoma
04-12-2018, 02:03 PM
Guys I got my Enterbay Robo. There is a line at the helmet above the face. Can you guys check yours that is it the same or is it a fault?

404430

Edit:

I found a youtube video and it looks like the helmet has the same gap. It is around 25:45 mark.


https://www.youtube.com/watch?v=9Oj6rYV9Eok

P.
04-12-2018, 03:07 PM
Guys I got my Enterbay Robo.but this is HT Robocop thread and you've already posted that in EB thread :dunno

Plastic Addict
04-13-2018, 01:32 PM
Besides all its pros, this is the main reason I never even looked at Enterbay's version.

I was looking at getting it until I watched a few video's that revealed parts just drop off if you so much as look at it.

csutkakoma
04-14-2018, 11:59 AM
Well the Hot Toys version is definitely has a better quality. There is no question about it. However you won't really play with them anyway.

dukefett
06-21-2018, 11:10 AM
BBTS has the Battle Damaged and Alex Murphy set for $440 with $100 bonus store credit right now. I finally picked it up, had been eyeing this set and it brings it to a lower price than what used sets had been going for on eBay.

a-dev
06-21-2018, 07:19 PM
You chose wisely. One of the all-time great action figures. Even the hardest of hardcore fans love it.

P.
06-22-2018, 12:28 AM
Even the hardest of hardcore fans love it.i still love intact helmeted Robocop 7.5:3.5 times more for being more memorable. i'd live with new robocop without BD one, but not the other way around.

Mr. EcKo
06-22-2018, 03:22 AM
I have this guy for sale with the docking station chair.

Dollmanron
07-02-2018, 07:43 AM
I've got the Hot Toys die-cast version, and have never had any issues with it; but I'm thinking of selling mine too.

dukefett
07-06-2018, 10:22 AM
416433

Got both sets on the shelf! Super glad to get them, the BBTS store credit sale is still going for the BD set. Only complain is the crotch grabber literally has no use on Robocop lol, it's way too small for his body.

Eisselmann
07-06-2018, 12:31 PM
Please insert the mouthplate properly. Brrrr...

dukefett
07-06-2018, 12:48 PM
Please insert the mouthplate properly. Brrrr...

What's wrong with it? It's in there straight his head is just angled.

Saintv1
07-06-2018, 01:27 PM
What's wrong with it? It's in there straight his head is just angled.It appears to be improperly seated; it's too high up. Did you detach the side of the chinguard when inserting it? That's the best way.

Sent from my ONEPLUS A3000 using Tapatalk

clutch
07-09-2018, 02:55 AM
Has he stuck to the chair? I put a helmet on the seat and it stuck!

P.
07-09-2018, 04:10 AM
yes i guess it will stick to almost every synthetic surface. i used different with same effect. both clean and BD robocops stick to surfaces.
but i keep 2 spare clean bodies dismantled in plastic breakfast bags, like these two kinds below

https://www.exida.ua/modules/pages/pictures/800x600/1375278155_2263.jpghttp://ngfdistributors.com/wp-content/uploads/2017/11/PlasticBags-3.jpg

and just checked them after maybe half a year of storage - no sticking.
so better cover surfaces with breakfast bags.
though i didn't try to cover the chair and see what will happen, i just raised robocop itself so it doesn't touch the chair with any of his parts - hips & back - and covered the armrest with pieces of his original plastic packing to protect forearms & palms.

Alice
07-09-2018, 05:24 AM
Sounds like the chairs themselves aren't properly sealed. Are they cast in coloured plastic, or do they have actual painted parts?

P.
07-09-2018, 05:30 AM
Are they cast in coloured plastic, or do they have actual painted parts?it's something like soft plastic or very firm rubber for the seat, the back and armrests.


Sounds like the chairs themselves aren't properly sealed.i tried one of these on a completely different seat.

https://sweetberries.ru/image/data/radar/%D1%81%D0%BF%D0%BE%D1%80%D1%82%D0%B8%D0%B2%D0%BD%D 1%8B%D0%B5%20%D1%81%D0%BE%D0%BB%D0%BD%D1%86%D0%B5% D0%B7%D0%B0%D1%89%D0%B8%D1%82%D0%BD%D1%8B%D0%B5%20 %D0%BE%D1%87%D0%BA%D0%B8%20(3).jpg

BD Robo stuck to it.

there were also cases, one of mine included, when extra fists stuck to original package's styrofoam.

Alice
07-09-2018, 05:38 AM
Are the hands hard plastic as well? Or are they a similar rubbery material?

P.
07-09-2018, 05:48 AM
no, the hands are a hard glossy plastic.

https://i.ebayimg.com/images/g/IK4AAOSwVFlUIanq/s-l400.jpg

when i was fixing one of fingers (one hand arrived with a broken peg between phalanxes, so i replaced it with a piece of needle and painted the ends with gloss black), i squeezed the ends of that needle with pliers and accidentally made a little scratch on one of the surfaces. if it was soft plastic, it would be smashed.
the gloss itself could react to styrofoam. but the main danger is chromed parts, which can stick to some surfaces and get a black spot with rainbow edges. as i said, it doesn't seem to react with plastic bags at all. but rubber and synthetic fabric melt the metal paint.
easily avoidable, as Robocop usually stands.
i also have a helmet in a BD Robo hand, they don't have gloss on them

https://i.ebayimg.com/images/g/3GQAAOSwkl5Xc93p/s-l400.jpg

and the helmet doesn't seem to stick to them, though i check it very rarely.

Alice
07-09-2018, 06:18 AM
Ah. So it's not the chair causing the sticking, but whatever paint they used to paint the figure itself? Weird. Although, that could probably be fixed with a gloss coat of Alclad sealer.

P.
07-09-2018, 06:47 AM
nah, it's easier to avoid contact or put plastic bags on surfaces than to apply anything to the paint and get a transparent glassy layer effect instead of almost metal.
p.s. i just checked the helmet in BD hand, and it's fine. no sticking, the paint on helmet didn't react.

Eisselmann
07-09-2018, 07:14 AM
Isn‘t it that softtouch rubber surface of the chair that sticks to the figures!?!

Alice
07-09-2018, 07:24 AM
get a transparent glassy layer effect instead of almost metal.

The Alclad clear is specifically made for metals. It goes on pretty much invisible, and the metal retains its metallic sheen. I use it when I chrome things.

dukefett
07-09-2018, 08:46 AM
I had read on here about the paint sticking issues and I have a piece of plastic film in between his ass and the chair.

creasy
07-15-2018, 03:08 PM
Looking to buy one of these in the U.K. if anyone has one for sale dm me


Sent from my iPhone using Tapatalk

Plastic Addict
07-16-2018, 06:55 AM
Ah. So it's not the chair causing the sticking, but whatever paint they used to paint the figure itself? Weird. Although, that could probably be fixed with a gloss coat of Alclad sealer.

Interesting to know as I have added some plastic sheet to my chair, so its the figure hmm

Eamon
08-07-2018, 09:11 AM
Can anybody help me here please? The black jaw piece is broke on my Robocop this morning and I was wondering if anybody has this piece for sale? Or just he head sculpt if that is easier.

This is one of my favourite figures and I super gutted this piece broke.

422222

dukefett
08-07-2018, 11:28 AM
Did it just snap or did something happen to it?

Eamon
08-07-2018, 12:31 PM
Did it just snap or did something happen to it?

Oh i did it. I had this figure since it first came out and every year or so I repose or change something out. Was doing that this morning and it split right down the centre at the chin. I guess I just pulled the sides out a bit too far this time but I'm always very careful. Feels like the plastic has gotten brittle with age but I might be wrong.

Saintv1
08-07-2018, 04:45 PM
Ah that sucks, sorry man. Toyanxiety doesn't have any Robo parts right now but you could keep checking there. Good luck.

Sent from my ONEPLUS A3000 using Tapatalk

a-dev
08-07-2018, 06:35 PM
That part won't be easy to get considering it's not a 'switch out'/alternate part. No one can sell that and still have a full Robocop on their shelf. And you'd probably be talking about buying an entire head at least. I've never seen anyone selling just the chin-piece.

P.
08-08-2018, 02:30 AM
nobody's even selling a neck collar piece, and i'm one collar short.

Eamon
08-08-2018, 08:39 AM
Ah that sucks, sorry man. Toyanxiety doesn't have any Robo parts right now but you could keep checking there. Good luck.

Sent from my ONEPLUS A3000 using Tapatalk

I'll keep an eye on them, thanks.

I just noticed now that the glue splashed on the clean helmet too and of course when it tried to remove it, it took some paint with it. I'm having lousy luck here.


That part won't be easy to get considering it's not a 'switch out'/alternate part. No one can sell that and still have a full Robocop on their shelf. And you'd probably be talking about buying an entire head at least. I've never seen anyone selling just the chin-piece.

Yes exactly. This seems to be what I am seeing. But there are some full bodies on eBay so I have asked the sellers if they gave the head. May as well just try for a head now.

I think I can save this if I find the right paint. Does any one know what silver paint I can use on the helmet?

snoop101
08-08-2018, 10:10 AM
I'll keep an eye on them, thanks.

I just noticed now that the glue splashed on the clean helmet too and of course when it tried to remove it, it took some paint with it. I'm having lousy luck here.



Yes exactly. This seems to be what I am seeing. But there are some full bodies on eBay so I have asked the sellers if they gave the head. May as well just try for a head now.

I think I can save this if I find the right paint. Does any one know what silver paint I can use on the helmet?

I looked on ebay for you and couldn't find just the black chin piece. Your best bet may be to buy another head sculpt or a whole new figure unfortunately.

Eamon
08-08-2018, 10:20 AM
I looked on ebay for you and couldn't find just the black chin piece. Your best bet may be to buy another head sculpt or a whole new figure unfortunately.

I appreciate that man, thanks. Yeah, I'd settle for just a whole head now at this stage.

snoop101
08-08-2018, 01:27 PM
I appreciate that man, thanks. Yeah, I'd settle for just a whole head now at this stage.

No prob dude. Oddly enough I couldn't find just the head either. Maybe a little patience and one might show up.

Eamon
08-14-2018, 11:26 AM
Does anybody know what silver paint I can use to cover up the marks left from glue splashes?

Bonez
01-14-2019, 10:16 AM
Went to move around some of my Hot Toys and grabbed Robocop. He's been in the same pose pretty much since I bought him. Pretty standard pose, and always careful with posing him. Well I pick him up and his right arm falls off at the shoulder. I know I didn't bust him while posing him and no one else has touched him. I look in and the shoulder socket and it has multiple cracks in it and the shoulder/arm will not sit back in it. what the hell? This sucks. Any way to repair this or has anyone else had this issue? I hate when they do die cast and have plastic joints. They never hold up. I bought this brand new so its not like a reseller sold me a busted used one. :mad:

440035
440036
440037
440038

a-dev
01-14-2019, 10:41 AM
Aw no. That reminds me of the cracking neck adapters a few of my T-800s and the Reeve Superman had and there was nothing to be done there except buy new adapters.

davejames
01-14-2019, 10:59 AM
Man that sucks. I wonder if you could slide a bit of metal tubing over the joint to reinforce it?

I had a scare a couple months ago when my entire figure toppled out of the detolf and completely broke apart when it hit the ground. Thankfully it all fit back together with no visible damage, but now I'm wondering if I might have cracked one of those joints in the process...

Bonez
01-14-2019, 11:23 AM
Yeah, i would watch the shoulder joint just in case the fall cracked it. I'm going to try a few things but not sure what will work and I've been lucky in never having to put one of my Hot Toys under the knife. I might have to try the metal tubing and see if that works. I don't think I can buy a replacement joint so i will have to see what i can do. I've fond a few videos online about repairing a shoulder. The shoulder neck joint assembly looks like this: The clear plastic is the original joint. Crappy they would use suck a brittle plastic.

440053

dukefett
01-14-2019, 01:16 PM
Yeah that's worrisome they'd use clear plastic. That's always so brittle.

Dollmanron
01-15-2019, 10:50 AM
Went to move around some of my Hot Toys and grabbed Robocop. He's been in the same pose pretty much since I bought him. Pretty standard pose, and always careful with posing him. Well I pick him up and his right arm falls off at the shoulder. I know I didn't bust him while posing him and no one else has touched him. I look in and the shoulder socket and it has multiple cracks in it and the shoulder/arm will not sit back in it. what the hell? This sucks. Any way to repair this or has anyone else had this issue? I hate when they do die cast and have plastic joints. They never hold up. I bought this brand new so its not like a reseller sold me a busted used one. :mad:

440035
440036
440037
440038

You make me afraid to touch mine now.

soundwave
01-15-2019, 11:37 AM
You make me afraid to touch mine now.

Me too

Eisselmann
01-15-2019, 04:13 PM
So, someone wrote something about buying new joint parts.
Perhaps that fellow collector could share where to get those parts? ;)
Because I have NO idea.

shells075
01-15-2019, 04:20 PM
You could try some epoxy resin.

Dollmanron
01-15-2019, 05:41 PM
Well I had to check both my RoboCops (Die-cast and Battle Damaged) and both their shoulders are good. They kind of made a sticking sound when I first turned them, but I guess that came from not moving them for so long. Worrying about the shoulders busting in the future does make me think about selling the Die-cast one now.

Bonez
01-16-2019, 12:02 PM
I'm just shocked at how badly it cracked without even moving it or re-posing it over the years. Don't even want to check what the other shoulder looks like.

Bonez
01-16-2019, 12:03 PM
You could try some epoxy resin.


I'll have to try that as i don't know if buying new shoulder joints is even an option.

Darth Fok
01-27-2019, 12:32 PM
Anyone have this issue with the broken shoulder? Scary stuff!

Dollmanron
01-27-2019, 06:09 PM
I have the Die-cast Robocop and the Battle Damaged Robocop and both their shoulders are fine; at least for now.

Bonez
01-30-2019, 11:08 AM
Yeah this was the newer die Cast Robocop.

Saintv1
02-02-2019, 07:57 PM
The shoulders on mine have always had a little "stick" to them. I will definitely be gentle in the future when reposing. 442744442745https://uploads.tapatalk-cdn.com/20190203/fa1e6b56dbb363df23ba5dc8e002f14e.jpg

Sent from my ONEPLUS A3000 using Tapatalk

predarnold
02-02-2019, 09:31 PM
https://scontent-lga3-1.xx.fbcdn.net/v/t31.0-8/fr/cp0/e15/q65/10984548_427063844116033_5692149177136132659_o.jpg ?_nc_cat=105&efg=eyJpIjoidCJ9&_nc_ht=scontent-lga3-1.xx&oh=35bf67335eab1a12d633467c08c2e430&oe=5CE8A6B2
https://scontent-lga3-1.xx.fbcdn.net/v/t31.0-8/fr/cp0/e15/q65/10994231_427063880782696_7846509682190228419_o.jpg ?_nc_cat=102&efg=eyJpIjoidCJ9&_nc_ht=scontent-lga3-1.xx&oh=bb6cc37575aa0651f70a0010913210a5&oe=5CB58CC7
https://scontent-lga3-1.xx.fbcdn.net/v/t31.0-8/fr/cp0/e15/q65/10995902_427063814116036_1950001815217081551_o.jpg ?_nc_cat=102&efg=eyJpIjoidCJ9&_nc_ht=scontent-lga3-1.xx&oh=2bd7b40ada077d81a66a462aebade98d&oe=5CFDF587

csutkakoma
02-03-2019, 12:58 AM
Wow beautiful photos!

Rondesmo
02-03-2019, 07:07 AM
Yeah superb pics!!!

predarnold
02-03-2019, 12:55 PM
https://scontent-lga3-1.xx.fbcdn.net/v/t31.0-8/fr/cp0/e15/q65/10974591_427063800782704_9212480877043762425_o.jpg ?_nc_cat=110&efg=eyJpIjoidCJ9&_nc_ht=scontent-lga3-1.xx&oh=0e1b64dcbf7da4a1d930aadd30441a5b&oe=5CF447CE
https://scontent-lga3-1.xx.fbcdn.net/v/t31.0-8/fr/cp0/e15/q65/10974757_427063717449379_8235491297625901861_o.jpg ?_nc_cat=102&efg=eyJpIjoidCJ9&_nc_ht=scontent-lga3-1.xx&oh=bea46de88712b411400f7e1fd2301930&oe=5CFF7738
https://scontent-lga3-1.xx.fbcdn.net/v/t31.0-8/fr/cp0/e15/q65/10947428_427063750782709_710248893654430791_o.jpg? _nc_cat=105&efg=eyJpIjoidCJ9&_nc_ht=scontent-lga3-1.xx&oh=58926743cf3a012b4d3ecb8695edeeaa&oe=5CFCE0C7
https://scontent-lga3-1.xx.fbcdn.net/v/t31.0-8/fr/cp0/e15/q65/10991618_427063874116030_1549728833569733831_o.jpg ?_nc_cat=105&efg=eyJpIjoidCJ9&_nc_ht=scontent-lga3-1.xx&oh=07c1a491394761f3b844606ca3eeb89c&oe=5CF07524

a-dev
02-03-2019, 01:45 PM
I initially thought all those pics were from the same person, they have a similar quality to them. Terrific shots.

shells075
02-03-2019, 02:46 PM
https://scontent-lga3-1.xx.fbcdn.net/v/t31.0-8/fr/cp0/e15/q65/10974591_427063800782704_9212480877043762425_o.jpg ?_nc_cat=110&efg=eyJpIjoidCJ9&_nc_ht=scontent-lga3-1.xx&oh=0e1b64dcbf7da4a1d930aadd30441a5b&oe=5CF447CE
https://scontent-lga3-1.xx.fbcdn.net/v/t31.0-8/fr/cp0/e15/q65/10974757_427063717449379_8235491297625901861_o.jpg ?_nc_cat=102&efg=eyJpIjoidCJ9&_nc_ht=scontent-lga3-1.xx&oh=bea46de88712b411400f7e1fd2301930&oe=5CFF7738
https://scontent-lga3-1.xx.fbcdn.net/v/t31.0-8/fr/cp0/e15/q65/10947428_427063750782709_710248893654430791_o.jpg? _nc_cat=105&efg=eyJpIjoidCJ9&_nc_ht=scontent-lga3-1.xx&oh=58926743cf3a012b4d3ecb8695edeeaa&oe=5CFCE0C7
https://scontent-lga3-1.xx.fbcdn.net/v/t31.0-8/fr/cp0/e15/q65/10991618_427063874116030_1549728833569733831_o.jpg ?_nc_cat=105&efg=eyJpIjoidCJ9&_nc_ht=scontent-lga3-1.xx&oh=07c1a491394761f3b844606ca3eeb89c&oe=5CF07524

:clap:bow


This fig is still one of my favs.

predarnold
02-03-2019, 05:47 PM
I initially thought all those pics were from the same person, they have a similar quality to them. Terrific shots.

All of my photos have logo.

predarnold
02-04-2019, 08:21 AM
:clap:bow


This fig is still one of my favs.

Yes. It’s perfect.

a-dev
02-04-2019, 10:21 AM
Almost. So painfully almost.

Saintv1
02-04-2019, 12:58 PM
I will been considering commissioning a repaint. Never got over the silver paint.

Sent from my ONEPLUS A3000 using Tapatalk

shells075
02-04-2019, 02:20 PM
Almost. So painfully almost.

Yeah, too true.

Bonez
03-25-2019, 09:42 AM
Wow...Great shots!


yeah, gotta find the best way to fix this guy so i can hopefully still pose him.

davejames
03-25-2019, 03:40 PM
I will been considering commissioning a repaint. Never got over the silver paint.

Sent from my ONEPLUS A3000 using Tapatalk

Yeah that still bugs the hell out of me too. Think I'll try airbrushing on either some gunmetal gray or use that transparent smoke color I used to darken the red on my diecast Mk3.

Marine Boy
03-25-2019, 05:32 PM
Whatever happened to the Threezero Cain prototype? That was the only good thing in the sequel.

OM1D
03-27-2019, 11:48 AM
I actually don't mind Robocop 2. There's definitely artistic value in it if you look closely, perhaps with a refresh viewing. Coupled with its robots (CAIN), immense violence, and rule breaking makes it a pretty good one. Does it suffer from the messy production and director changes? Of course. It's still pretty good for it's time and amazing compared to today's shït.

Hydeous
06-11-2019, 07:48 AM
Hey guys, gonna try my hand at repainting robo. Anybody got any high res pics of actual suit / screen grabs?

P.
06-11-2019, 08:05 AM
It's still pretty good for it's time and amazing compared to today's shït.star wars isn't today's or even yesterdays and still everything's amazing compared to it :dunno
don't get me wrong, RB2 was great, the only thing it was missing was Robocop music theme.

davej1438
07-04-2019, 05:47 PM
Sheesh, pulled this guy out of detolf after not really touching him since i bought him and the arm just fell off. Shoulder joint cracked without touching him. Used blue tac to hood it in and it is holding fine but really sucks. hoping the other arm doesnt do the same.

Mine looks exactly the same as the photo a few pages back. I just loaded blue tac into the arm hole and pushed it in. At least you cant tell it is broken. I suspect this will happen to most since I have never even moved his arms since I took him out of package.

Jameson Rook
07-04-2019, 06:13 PM
Sorry to hear that. It seems like more and more people are reporting of cracking joints that I think it might be inevitable in the long run.

shells075
07-04-2019, 07:01 PM
Sheesh, pulled this guy out of detolf after not really touching him since i bought him and the arm just fell off. Shoulder joint cracked without touching him. Used blue tac to hood it in and it is holding fine but really sucks. hoping the other arm doesnt do the same.

Mine looks exactly the same as the photo a few pages back. I just loaded blue tac into the arm hole and pushed it in. At least you cant tell it is broken. I suspect this will happen to most since I have never even moved his arms since I took him out of package.

:horror sorry to hear that man.
Ok not touching this fig, for its annual dust down now.

a-dev
07-04-2019, 07:27 PM
****ing Hot Toys

Jameson Rook
07-04-2019, 07:33 PM
****ing Hot Toys

All 5 of my Terminator belts have crumbled to dust and both of the Battle Damaged pleather jackets are almost powder at this point. I'm convinced that HT don't do stress tests for the materials they use.

P.
07-05-2019, 01:45 AM
I'm convinced that HT don't do stress tests for the materials they use.of course they do.
we are the testers.

davej1438
07-05-2019, 12:10 PM
Yeah, I don't think there was a figure in my collection that I messed with less. I seriously put his gun in his hand and left his arm pointing down. I got him on release and just pulled him out of detolf to change shelves and arm dropped. Crazy stuff. I've had some QC issues over the years, (crack on Iron Monger etc.) but this might be the worst considering how he was left alone.

Zurdo95D
07-05-2019, 11:16 PM
Sheesh, pulled this guy out of detolf after not really touching him since i bought him and the arm just fell off. Shoulder joint cracked without touching him. Used blue tac to hood it in and it is holding fine but really sucks. hoping the other arm doesnt do the same.

Mine looks exactly the same as the photo a few pages back. I just loaded blue tac into the arm hole and pushed it in. At least you cant tell it is broken. I suspect this will happen to most since I have never even moved his arms since I took him out of package.


Sorry to hear that. It seems like more and more people are reporting of cracking joints that I think it might be inevitable in the long run.


:horror sorry to hear that man.
Ok not touching this fig, for its annual dust down now.


****ing Hot Toys


All 5 of my Terminator belts have crumbled to dust and both of the Battle Damaged pleather jackets are almost powder at this point. I'm convinced that HT don't do stress tests for the materials they use.


Hmm, basically HT just has to up their durability on figures and they'd be golden?

stshammgod
07-06-2019, 08:12 AM
Ahh crap. What did they use? Clear plastic for the shoulder sockets?

Lee in MI
07-07-2019, 01:20 PM
Dayum...not happy!