PDA

View Full Version : Hot Toys - DX13 - T2: T-800 (Battle-Damaged Version) 1/6-scale Collectible Figure



Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [36] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

HeubertMichael
11-28-2013, 08:20 PM
Thanks, I just had to use more force and and a bit of turning. Knowing that it worked for other people made me a bit more persistent. I also got the PERS moving up and down, which wasn't working last night either. I had to use more force than I'd like to on the PERS. I hope I didn't weaken it.

I see. I watched Xenomorph's cool review of the DX13 and I noticed that the ball joint is the same as DX10's, that is it's molded right on a plastic plate in the HS. Unlike other PERS heads DX13 and DX10 headsculpts require a lot of care when being pulled out of/attached on to the body. I gave my DX10 a Barney Ross black shirt yesterday, and since it's been months I moved its head last it kinda got stuck and I thought the plate would break when I was pulling the HS off.

a-dev
11-28-2013, 08:20 PM
DX13 has a broader neck?

I think it is, from the front view. But even the DX10 neck looked OK directly front-on. It was every other angle where it fell apart. DX13's neck though, well so far I haven't found major reason to complain. Although it looks as big as DX10's it nevertheless seems better. I haven't quite decided why that is yet.

highlander1
11-28-2013, 08:26 PM
Here he is, the DX10 with the new head and jacket on:

http://i19.photobucket.com/albums/b183/mmcollectors/Terminator/D8BB1F1D-A3B7-4D20-B55F-DB37071330DA_zpslgnjs0cq.jpg (http://s19.photobucket.com/user/mmcollectors/media/Terminator/D8BB1F1D-A3B7-4D20-B55F-DB37071330DA_zpslgnjs0cq.jpg.html)

http://i19.photobucket.com/albums/b183/mmcollectors/Terminator/E454AB0E-BB8F-4BE9-96A6-E3BE1223D0A8_zpsputvrarg.jpg (http://s19.photobucket.com/user/mmcollectors/media/Terminator/E454AB0E-BB8F-4BE9-96A6-E3BE1223D0A8_zpsputvrarg.jpg.html)

Now, the pressure's off to buy an extra body so I can be patient and wait for a deal. I really want to try using a real camera on this.

congats on getting him together :clap you had me a little worried ,but knew it should work. I Realy like the semi damaged look.

HeubertMichael
11-28-2013, 08:26 PM
I think it is, from the front view. But even the DX10 neck looked OK directly front-on. It was every other angle where it fell apart. DX13's neck though, well so far I haven't found major reason to complain.

Sounds good, seems like they addressed the previous neck issue. I find the DX10 requiring some futzing to make the head-neck connection look more natural. Takes a minute to get rid of both the ugly chin gap and the gap under the ear (that makes the HS look floating).

a-dev
11-28-2013, 08:41 PM
Sounds good, seems like they addressed the previous neck issue. I find the DX10 requiring some futzing to make the head-neck connection look more natural. Takes a minute to get rid of both the ugly chin gap and the gap under the ear (that makes the HS look floating).

Well you can still get gaps on DX13, its just inevitable with ball-joint heads I guess. However generally speaking the way the head and neck work together on the figure seems to be better than on DX10 and the whole thing looks less stiff and less Minoton-like.

sixth_sith
11-28-2013, 09:32 PM
I can't believe I forgot to do a side by side body shot of the dx10 vs dx13

There is no doubt about it they are different.... and yes it turned out to be the neck, something none of us would ever guess could get bigger

OSCORP
11-28-2013, 09:32 PM
Thinkin of busting down and getting this figure.

:borg

5x10
11-28-2013, 10:39 PM
Thinkin of busting down and getting this figure.

:borg

Do it. :yess:

OSCORP
11-28-2013, 10:43 PM
LOL how can i pass?

Besides $?

:)

The Chev
11-28-2013, 10:57 PM
LOL how can i pass?

Besides $?

:)

http://www.whitperson.com/wp-content/uploads/2013/04/Lets-Do-This.jpg

paramoremcr88
11-28-2013, 11:13 PM
Finally got him after every possible delay! Love him, he's fantastic! :rock
http://i1285.photobucket.com/albums/a582/paramoremcr88/0489883eb3f5da4060f72b7a365976ed_zps61b515bc.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/f854be3761c7343b33d9184c92a8f2ff_zps5b1bff82.jpg



Great pics!


Wow...............:thud:

Might steal this pic for Avatar reasons :clap


Those pics look like movie stills
Very nice

Many thanks guys! :hi5:

paramoremcr88
11-28-2013, 11:15 PM
http://i1285.photobucket.com/albums/a582/paramoremcr88/e9134e30394e7551358e58483490abca_zps6d658b3f.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/af32c5ef96461fdb93812b4302f7aa48_zps3d9a24ec.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/522b31b31a7b42e6fe3f21581a91179a_zps4d331ed8.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/7899a8b5d47d1fce7010475a247f8f17_zps31683a03.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/f41eb2ce2cbc17e49e6a3dcddd35990c_zpsd16839ab.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/3dee0d39cbb143aee56378749bf5e799_zps3f13f725.jpg

Royce12
11-28-2013, 11:17 PM
These pictures are crazy.. Great job.

DEATHASYLUM
11-28-2013, 11:20 PM
Amazing paramoremcr88, just amazing :clap:clap:clap

sixth_sith
11-28-2013, 11:33 PM
http://i1285.photobucket.com/albums/a582/paramoremcr88/7899a8b5d47d1fce7010475a247f8f17_zps31683a03.jpg



OMG who???

:clap another collector raising the bar... Rorywan has the artistic award, I give these the realistic ones to beat :clap:clap:clap:hi5:

inked
11-28-2013, 11:36 PM
Crazy good shots there Paramoremcr88

Mr Walker
11-29-2013, 12:48 AM
Guys, you are waaaay off re Figure of the Year.

Blitzway's Carlito. :thud:

/argument.

srs.

Don't get me wrong though, this figure is stunning, and I eagerly await it's addition to my collection but... still too young. :(

Leon 911
11-29-2013, 12:54 AM
Guys, you are waaaay off re Figure of the Year.

Blitzway's Carlito. :thud:

/argument.

srs.

Don't get me wrong though, this figure is stunning, and I eagerly await it's addition to my collection but... still too young. :(

What just happened here.....


Sent from my iPad using Tapatalk HD

Double J
11-29-2013, 01:50 AM
Guys, you are waaaay off re Figure of the Year.

Blitzway's Carlito. :thud:

/argument.

srs.

Don't get me wrong though, this figure is stunning, and I eagerly await it's addition to my collection but... still too young. :(

You think he still looks too young? Are you aware that Arnold was 43 -44 years old when he made this movie? They got the age just fine on the sculpt.

Mr Walker
11-29-2013, 02:13 AM
What just happened here.....



Reality. :D

No, look, not trying to be a **** (I think this figure is awesome), but I've been collecting movie related memorabilia for 20+ years now, and Carlito's the only thing in close to $100K of purchases that an involuntary "oh wow" has ever escaped my lips upon opening.


You think he still looks too young? Are you aware that Arnold was 43 -44 years old when he made this movie? They got the age just fine on the sculpt.

Yeah, I still think he looks a little young. Not "Biebernator" like DX10, but yeah. A little too smooth.

Roll on the hate.

olbertfrog
11-29-2013, 03:05 AM
Who cares...
To each its own, lets not dwell into this.
Or make a poll and be done with it.


The DX13 boots are a new sculpt, the gum is thinner than the mms dx10.
Hence weight difference if you put them side by side.
The pers on the DX13 is perfect.

TheFiend
11-29-2013, 04:00 AM
http://i1285.photobucket.com/albums/a582/paramoremcr88/7899a8b5d47d1fce7010475a247f8f17_zps31683a03.jpg


This one really shows off how good the PERS looks. No more bug eyes. Well done para. :)

TheFiend
11-29-2013, 04:40 AM
Ok, here is what I was taking about with the improvement on the PERS eyes themselves. See how Luke is more jagged looking, straight clean lines. I called it a starburst pattern for lack of a better term. This is how PERS looked on all past figures It's a small thing but I think it's cool that they've done better with them.

http://i1203.photobucket.com/albums/bb388/ONESIXOMG/SkyWalkerHD202_zpsfafff96f.jpg

The DX10 with the weird jagged pattern.


http://i1203.photobucket.com/albums/bb388/ONESIXOMG/DXT-800HD311_zps90ee4ae8.jpg

And here with the new BD Arnie the iris looks more natural in it's pattern and less doll like,fake. What do you guys think?

http://i1203.photobucket.com/albums/bb388/ONESIXOMG/Hottoys/DX13%20T800%20BD/T28_zps25f9e5d0.jpg~original

http://i1203.photobucket.com/albums/bb388/ONESIXOMG/Hottoys/DX13%20T800%20BD/T276_zps3a892250.jpg~original

Leon 911
11-29-2013, 04:46 AM
Reality. :D

No, look, not trying to be a **** (I think this figure is awesome), but I've been collecting movie related memorabilia for 20+ years now, and Carlito's the only thing in close to $100K of purchases that an involuntary "oh wow" has ever escaped my lips upon opening.



Yeah, I still think he looks a little young. Not "Biebernator" like DX10, but yeah. A little too smooth.

Roll on the hate.

Ouch... 20 plus years, 100+ k , even al pachino is smirking all the way through... And yes... Really! ... 100k ... Ouch again...


Sent from my iPad using Tapatalk HD

Frank Jaeger
11-29-2013, 04:52 AM
Is anyone gonna try and make the exposed endo more chrome?

Rorywan
11-29-2013, 04:57 AM
Is anyone gonna try and make the exposed endo more chrome?

yep.




...............................................

Frank Jaeger
11-29-2013, 05:00 AM
Looking forward to seeing the results Rory! Not a deal breaker for me either but it would look much better without so much of it

Will you also be getting rid of most of the blood around the bd parts?


yep.




...............................................

Mr Walker
11-29-2013, 05:12 AM
Ouch... 20 plus years, 100+ k , even al pachino is smirking all the way through... And yes... Really! ... 100k ... Ouch again...



Heh. It's a long time, so it sounds worse than it is.

Wouldn't change a thing! :D

Rorywan
11-29-2013, 05:23 AM
Looking forward to seeing the results Rory! Not a deal breaker for me either but it would look much better without so much of it

Will you also be getting rid of most of the blood around the bd parts?

Double yep. But just for the record, I think it's fantastic out of the box.

Frank Jaeger
11-29-2013, 05:41 AM
Oh yes i totally agree. I don't have it in hand yet but the pictures posted by yourself and everyone else have already proven it's worth


Double yep. But just for the record, I think it's fantastic out of the box.

Leon 911
11-29-2013, 05:47 AM
Double yep. But just for the record, I think it's fantastic out of the box.

Completely agree. But i would still prefer the red to be a bit less. Trying to fix one of my dx13 by toning it down ... lets see how that goes.


Sent from my iPad using Tapatalk HD

Kovach
11-29-2013, 05:51 AM
You bastards and your beatiful pictures made me cave in and I'm getting one.

Bastards, all of you!

Leon 911
11-29-2013, 05:53 AM
You bastards and your beatiful pictures made me cave in and I'm getting one.

Bastards, all of you!
Damn thats a 350 bucks pic... He gotta get a commission...


Sent from my iPad using Tapatalk HD

a-dev
11-29-2013, 06:00 AM
You think he still looks too young? Are you aware that Arnold was 43 -44 years old when he made this movie? They got the age just fine on the sculpt.

Agreed, I really don't see an age problem now, definitely not in person. In fact, generally speaking I really don't think pics are doing this thing justice. I find that rather annoying actually. Personally I haven't been able to take a single pic that I'm satisfied with.


Ok, here is what I was taking about with the improvement on the PERS eyes themselves. See how Luke is more jagged looking, straight clean lines. I called it a starburst pattern for lack of a better term. This is how PERS looked on all past figures It's a small thing but I think it's cool that they've done better with them.

The DX10 with the weird jagged pattern.


http://i1203.photobucket.com/albums/bb388/ONESIXOMG/DXT-800HD311_zps90ee4ae8.jpg

And here with the new BD Arnie the iris looks more natural in it's pattern and less doll like,fake. What do you guys think?

http://i1203.photobucket.com/albums/bb388/ONESIXOMG/Hottoys/DX13%20T800%20BD/T28_zps25f9e5d0.jpg~original

Yeah you're definitely right Fiend, good examples. This is a very positive step forward for PERS. I hope it wasn't a fluke.

elämän merimies
11-29-2013, 06:31 AM
fist time order through Sideshow and I just paid 115USD taxes on this guy. OUCH! :slap

paramoremcr88
11-29-2013, 06:31 AM
These pictures are crazy.. Great job.


Amazing paramoremcr88, just amazing :clap:clap:clap


OMG who???

:clap another collector raising the bar... Rorywan has the artistic award, I give these the realistic ones to beat :clap:clap:hi5:


Crazy good shots there Paramoremcr88


This one really shows off how good the PERS looks. No more bug eyes. Well done para. :)

Many, many thanks for the great comments guys, it's very much appreciated. :hi5: :duff

a-dev
11-29-2013, 06:45 AM
Is anyone gonna try and make the exposed endo more chrome?


yep.




...............................................

If you're successful at that might you possibly take commissions on repaints? A few of us here might go for it.

I'm also wondering if, inspired by the quality of the headsculpts on DX13, you might go back to DX10 and try to improve that one. Get the PERS looking better, fix the shape of the back of his head etc.

DX13 proves that I had exactly the right idea with what I was trying to do here -

http://www.sideshowcollectors.com/forums/showpost.php?p=6124537&postcount=9010
http://www.sideshowcollectors.com/forums/showpost.php?p=6124574&postcount=9012

Fixing the PERS though, was always totally beyond me. I didn't dare even begin to try.

Rorywan
11-29-2013, 06:52 AM
If you're successful at that might you possibly take commissions on repaints? A few of us here might go for it.

I'm also wondering if, inspired by the quality of the headsculpts on DX13, you might go back to DX10 and try to improve that one. Get the PERS looking better, fix the shape of the back of his head etc.

DX13 proves that I had exactly the right idea with what I was trying to do here -

http://www.sideshowcollectors.com/forums/showpost.php?p=6124537&postcount=9010
http://www.sideshowcollectors.com/forums/showpost.php?p=6124574&postcount=9012

Fixing the PERS though, was always totally beyond me. I didn't dare even begin to try.

Yeah, I'm gonna give the DX13 a go over when i get the extra head I ordered. See how i get on with that first. I would start messing with the one I have already, but I want to wait to see a second in hand before I do anything. I would rather mess up the worst of the two. You have a few now A-dev have you noticed much difference on the chrome/blood sections between them?

a-dev
11-29-2013, 06:54 AM
Yeah, I'm gonna give the DX13 a go over when i get the extra head I ordered. See how i get on with that first. I would start messing with the one I have already, but I want to wait to see a second in hand before I do anything. I would rather mess up the worst of the two. You have a few now A-dev have you noticed much difference on the chrome/blood sections between them?

No, they're all the same unfortunately. There's just no silver there at all. Chrome would be ideal but realistically HT has never used it on the endo-parts before so I'm saying silver - but as I said, no sign of that even. Terrible decision by Hot Toys, it really diminishes the impact of the BD. If you didn't know better and study it up close you'd say it was just a guy with some nasty wounds.

Rorywan
11-29-2013, 07:08 AM
No, they're all the same unfortunately. There's just no silver there at all. Chrome would be ideal but realistically HT has never used it on the endo-parts before so I'm saying silver - but as I said, no sign of that even. Terrible decision by Hot Toys, it really diminishes the impact of the BD. If you didn't know better and study it up close you'd say it was just a guy with some nasty wounds.

Yeah, it's an odd choice all right. I have been doing a bit of research for a while now on how (for something else) on how to give a proper metal finish to plastic. I'm gonna try some stuff. Straight paint is good, but it always looks like silver paint. I'll see how I get on.

JD_Myers
11-29-2013, 07:48 AM
Didnt think I would be getting this before Christmas with buying from a UK seller, But ToyHQ getting them in on Dec 20th :yess:

Cant wait!

TheFiend
11-29-2013, 08:06 AM
Double yep. But just for the record, I think it's fantastic out of the box.

Will be looking forward to what you come up with....and more than likely PM for details. :lol


Agreed, I really don't see an age problem now, definitely not in person. In fact, generally speaking I really don't think pics are doing this thing justice. I find that rather annoying actually. Personally I haven't been able to take a single pic that I'm satisfied with.

I think it's the only Arnie to date that accurately captures his correct age. Which is something I'm most happy about.




Yeah you're definitely right Fiend, good examples. This is a very positive step forward for PERS. I hope it wasn't a fluke.


After taking a quick check on some other DX figures I own I see that DX11 is also better than the earlier PERS eyes. I can't check DX12 because pulled those silly derp eyes out and replaced it will sculpted ones from the Wayne head almost immediately. But the DX08 and 09 definitely have the jagged starburst look. So it looks like it ended with them and continued to improve on them with every release up until this here DX13 judging by pics. Lets hope they continue to advance to the point that they look like true glass eyes.

Frank Jaeger
11-29-2013, 08:10 AM
Do you think it'd be easier to mod an existing DX10 to look like the DX13 or mod the semi BD DX13 head to be a clean version?

I would imagine the latter would be the easier or the 2

(coming from someone who has limited modding exp)


Yeah, I'm gonna give the DX13 a go over when i get the extra head I ordered. See how i get on with that first. I would start messing with the one I have already, but I want to wait to see a second in hand before I do anything. I would rather mess up the worst of the two. You have a few now A-dev have you noticed much difference on the chrome/blood sections between them?

Rorywan
11-29-2013, 08:30 AM
Do you think it'd be easier to mod an existing DX10 to look like the DX13 or mod the semi BD DX13 head to be a clean version?

I would imagine the latter would be the easier or the 2

(coming from someone who has limited modding exp)

I wouldn't try either of those. Both are possible for sure, but a lot of work to make something not as good as it was?

Frank Jaeger
11-29-2013, 08:34 AM
I meant to make a better clean version for the DX10.

If you sculpted over the semi bd parts and just added the bit of hair missing it would be a better clean version than the DX10 no?


I wouldn't try either of those. Both are possible for sure, but a lot of work to make something not as good as it was?

The Chev
11-29-2013, 08:35 AM
Besides the pattern on the PERS, which is different, I was trying to compare the size of the eyes on the DX10 and DX13. They look the same size roughly, so I was trying to figure out what else is different then I noticed the DX10's eyeballs are kind of deeper in the eye sockets, while DX13 are closer to the front which looks more lifelike.

BadMuthaDude
11-29-2013, 08:54 AM
Adjusting the PERS placement and repainting the DX10 would go a long way.

a-dev
11-29-2013, 08:57 AM
Adjusting the PERS placement and repainting the DX10 would go a long way.

Resculpting the eyelids too, making the eye opening smaller and more accurately shaped.

Rorywan
11-29-2013, 09:05 AM
I meant to make a better clean version for the DX10.

If you sculpted over the semi bd parts and just added the bit of hair missing it would be a better clean version than the DX10 no?

Yeah, definitely, pretty tricky to do professionally though, you would have to repaint the entire DX13 head, I think otherwise you would have strange patches.


Resculpting the eyelids too, making the eye opening smaller

That I may try, as well as a bit of a repaint. I never took a DX10 head apart, if it's anyway similar to Indy I might be able to change it a bit.
Will have a look at w.end. Now **** the 1/6th collectibles, my PS4 arrived.
bye.

:rock

Frank Jaeger
11-29-2013, 09:12 AM
Yeah, definitely, pretty tricky to do professionally though, you would have to repaint the entire DX13 head, I think otherwise you would have strange patches.

Naturally. I've seen what you did with the Joker heads man i think you could do it!

a-dev
11-29-2013, 09:15 AM
All using MMS jackets, the sleeveless one is modded.

http://i594.photobucket.com/albums/tt28/a-dev/uploads3_zpsde224ee3.jpg (http://s594.photobucket.com/user/a-dev/media/uploads3_zpsde224ee3.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/uploads4_zps8d5cdf1d.jpg (http://s594.photobucket.com/user/a-dev/media/uploads4_zps8d5cdf1d.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/uploads2_zps19106dcd.jpg (http://s594.photobucket.com/user/a-dev/media/uploads2_zps19106dcd.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/uploads1_zps589316a5.jpg (http://s594.photobucket.com/user/a-dev/media/uploads1_zps589316a5.jpg.html)

Frank Jaeger
11-29-2013, 09:19 AM
Sharp photos adev

Although i can't tell if it's just the pictures but the more fitted jacket makes the head look even bigger

a-dev
11-29-2013, 09:25 AM
Sharp photos adev

Although i can't tell if it's just the pictures but the more fitted jacket makes the head look even bigger

I suppose it would. I still think it looks better though. Must examine some full body-shot screengrabs of Arnie in T2 to remind myself what the head-body proportions should be. Its never gonna be accurate to Arnie wearing the BD prosthetics though. Those bulked him out to T1 proportions.

The Chev
11-29-2013, 09:27 AM
It seriously looks like you snapped a picture of the real Arnold in those pictures.

Frank Jaeger
11-29-2013, 09:35 AM
It may just be the shadowing under the neck making the neck appear slimmer though, the camera loves to lie

Keep my anticipation up until mine arrives fella's :yess:

The Skull
11-29-2013, 09:38 AM
Nice pics a-dev, that mms jacket looks great:clap

The wait for this piece is brutal:monkey4

paramoremcr88
11-29-2013, 09:55 AM
All using MMS jackets, the sleeveless one is modded.

http://i594.photobucket.com/albums/tt28/a-dev/uploads3_zpsde224ee3.jpg (http://s594.photobucket.com/user/a-dev/media/uploads3_zpsde224ee3.jpg.html)


Love this look, so many display options for this piece. :clap

a-dev
11-29-2013, 09:57 AM
Love this look, so many display options for this piece. :clap

The Power of Rod. :exactly:

paramoremcr88
11-29-2013, 10:14 AM
http://i1285.photobucket.com/albums/a582/paramoremcr88/c30b81c4a43feee38fa8a22993b7e587_zpsecb0354e.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/49e12842738f5ca8c62690371fa53cff_zpsf6a282ba.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/daae42479ee3c765f05cf3fdd78242e6_zps84d6d924.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/9cf54315690b44b63a848c6ce0c1dbe2_zps06866db4.jpg


Current pose.

http://i1285.photobucket.com/albums/a582/paramoremcr88/0e451e854808cdca5c083f7d30380a2f_zpsd2966efa.jpg

sixth_sith
11-29-2013, 10:32 AM
nice paramore, amazing how the seam in the mouth is the only telling flaw...

Hey guys... I was about to weather my DX13 boots...

check out how much work we all have to do!

http://www.screenused.com/images/t2/phboots/Boots1.jpg

DiFabio
11-29-2013, 10:34 AM
Those boots look like crap. Like the damage to them isn't natural.

DiFabio
11-29-2013, 10:37 AM
The MMS 117 looks better than the real leather. :lol


Crazy how great their first attempt at the jacket was compared to the later "real leather" ones. I love the subtle weathering they used on the original Uncle Bob.

sixth_sith
11-29-2013, 10:37 AM
They were the boots used in planet hollywood for the lifesize t-800 :dunno

http://www.screenused.com/images/t2/phboots/PHtube2.jpg
http://www.screenused.com/?sectionID=item-detail&subsectionID=index.cfm&item_id=3137

DiFabio
11-29-2013, 10:39 AM
Yeah, I know they're real but,

Movie with dark contrasting light/blue cinematography > Actual screen used prop

Those boots look like crap. Like he spent a couple of weeks with a construction team out in the dirt and mud.

sixth_sith
11-29-2013, 10:42 AM
Yeah, I know they're real but,

Movie with dark contrasting light/blue cinematography > Actual screen used prop

Those boots look like crap. Like he spent a couple of weeks with a construction team out in the dirt and mud.

I'm all ears meng... show me what you would do? My DX13 boots look like he just walked out of the Leather Ranch, with the price tag still on them, something aint right

HeubertMichael
11-29-2013, 10:42 AM
http://i1285.photobucket.com/albums/a582/paramoremcr88/49e12842738f5ca8c62690371fa53cff_zpsf6a282ba.jpg




FREAKIN' EPIC.

Great photo, paramoremcr88 :clap

a-dev
11-29-2013, 10:42 AM
Crazy how great their first attempt at the jacket was compared to the later "real leather" ones. I love the subtle weathering they used on the original Uncle Bob.

Yeah, any attempt by them the make the clothes better just ended up creating new problems. It never got better than MMS117's clothes.

Sidious-66
11-29-2013, 10:42 AM
Nice pictures a-dev and paramoremcr88.

Also it is great to hear that you got your DX13 head onto your DX10 body BadMuthaDude. :yess:

shells075
11-29-2013, 10:44 AM
I gots to swap over my mms117 boots and put them on the DX13, at least HT weathered the mms boots a little. Looks like the DX13 took his boots to the shoe shiners.

mr flibble
11-29-2013, 10:46 AM
I think the sliver on mine is fine. Or we talking full bd head?
http://i48.photobucket.com/albums/f238/rob6060/824C8827-8BF6-4927-8ECE-2613561BCF32.jpg (http://s48.photobucket.com/user/rob6060/media/824C8827-8BF6-4927-8ECE-2613561BCF32.jpg.html)

DiFabio
11-29-2013, 10:49 AM
I'm all ears meng... show me what you would do? My DX13 boots look like he just walked out of the Leather Ranch, with the price tag still on them, something aint right


Just leave them be.

I mean seriously, how often do you really look at a mans shoes?

olbertfrog
11-29-2013, 10:54 AM
They were the boots used in planet hollywood for the lifesize t-800 :dunno

http://www.screenused.com/images/t2/phboots/PHtube2.jpg
http://www.screenused.com/?sectionID=item-detail&subsectionID=index.cfm&item_id=3137

Probably from after visiting Salceda.

dx13 works great on for galeria look, no need to weather them.
just swap. Even better DX10 with dx13 boots for galleria look.

solidsnake21
11-29-2013, 10:55 AM
I Hate UPS, it's sitting at my local facility and they won't let me pick it up today because it's scheduled for a Monday delivery and I'll prob be at work when they attempt delivery. Has anyone ever had their UPS guy leave it despite the "signature required" aspect?

shells075
11-29-2013, 10:58 AM
Just leave them be.

I mean seriously, how often do you really look at a mans shoes?

I have only looked at one mans shoes, it was in a movie made a few years ago, The Scrimshaw Petition.

Stealth V3teran
11-29-2013, 11:15 AM
well today wasn't the day for me:( the knobheads sorted it to the wrong depot, so it has to be re-routed to my local depot. So looks like i may have to drive over tomorrow. Also the customs+handling on mine is £18

Invictus Sol
11-29-2013, 11:19 AM
I Hate UPS, it's sitting at my local facility and they won't let me pick it up today because it's scheduled for a Monday delivery and I'll prob be at work when they attempt delivery. Has anyone ever had their UPS guy leave it despite the "signature required" aspect?
Double-check with UPS but I believe they have an option where you can waive the signature condition and they will leave the package, even if you're not there. I considered it but decided it was too risky. If the box arrives beat to hell you've basically accepted delivery, along with chance either driver or passer-by takes it for themselves.

paramoremcr88
11-29-2013, 11:29 AM
well today wasn't the day for me:( the knobheads sorted it to the wrong depot, so it has to be re-routed to my local depot. So looks like i may have to drive over tomorrow. Also the customs+handling on mine is £18

What a farce! The staff at my depot were useless too. I had to pay them £25 for mine.

tominator56
11-29-2013, 11:33 AM
Got mine today - Spent an easy 2 hours messing with it already, and I still aint finished! Lots of fun to be had with this one, that's for sure!

Papasmoak
11-29-2013, 11:39 AM
Congrats to all who own this great piece, I myself do not yet.

For those who do, I challenge you to stuff the extra arm piece behind his back to achieve this.... :hi5:

http://www.imfdb.org/images/thumb/0/09/T2GoodOlArney-4.jpg/600px-T2GoodOlArney-4.jpg

On a side note, where can I get a 1/6 D.A.R.E. shirt?...LOL.

http://s.pikabu.ru/post_img/2013/02/08/9/1360331658_1392266212.jpg

DEATHASYLUM
11-29-2013, 11:42 AM
Congrats to all who own this great piece, I myself do not yet.

For those who do, I challenge you to stuff the extra arm piece behind his back to achieve this.... :hi5:

http://www.imfdb.org/images/thumb/0/09/T2GoodOlArney-4.jpg/600px-T2GoodOlArney-4.jpg

On a side note, where can I get a 1/6 D.A.R.E. shirt?...LOL.


That's just not a very good look though :lol

paramoremcr88
11-29-2013, 11:46 AM
nice paramore, amazing how the seam in the mouth is the only telling flaw...


FREAKIN' EPIC.

Great photo, paramoremcr88 :clap


Nice pictures a-dev and paramoremcr88.


Cheers guys! :duff

Papasmoak
11-29-2013, 11:49 AM
That's just not a very good look though :lol

Oh I agree Death, i was suggesting it just for the sake of a photo. Not to display, unless you like that sort of thing. :rotfl

DEATHASYLUM
11-29-2013, 11:52 AM
Oh I agree Death, i was suggesting it just for the sake of a photo. Not to display, unless you like that sort of thing. :rotfl

:lol I will do it for you sometime today, unless someone beats me to it :wink1:

Papasmoak
11-29-2013, 11:54 AM
:lol I will do it for you sometime today, unless someone beats me to it :wink1:


That's the spirit buddy! :clap

DEATHASYLUM
11-29-2013, 11:56 AM
That's the spirit buddy! :clap

http://www.youtube.com/watch?v=4QWfrxYt9DQ

The Chev
11-29-2013, 11:57 AM
So, the only thing that bugs me is in extreme close-ups of the figure you can see a bunch of brown spots. I noticed this on Mandarin too. Has Hot Toys always done this or is this a newer texture scheme?

dominishin
11-29-2013, 12:06 PM
It's common, but obviously not noticeable in-hand because they're not the size of an actual human head.

sixth_sith
11-29-2013, 12:50 PM
Just leave them be.

I mean seriously, how often do you really look at a mans shoes?

ok :cuckoo: why don't you toss all the shoes off your figures into the trash :lol

Anyways, I'm going to continue off where hot toys was lazy... the Enterbay 1/4 bd seems to have much more wear

http://www.blackopstoys.com/ebaypics/ENTERBAY/1013/EB-1013-07A.JPG

vodoun
11-29-2013, 12:52 PM
The jacket needs to be a little more grey, right?

Fixed up the DX10 stubble.

http://farm8.staticflickr.com/7436/11121247754_526afdc1e4_b.jpg
http://farm4.staticflickr.com/3813/11121249724_1c4b6790ed_b.jpg

DiFabio
11-29-2013, 12:55 PM
ok :cuckoo: why don't you toss all the shoes off your figures into the trash :lol

Anyways, I'm going to continue off where hot toys was lazy...




Ya blew it.



http://media0.giphy.com/media/10C3mJDOpzV6M/200_s.gif






http://farm8.staticflickr.com/7436/11121247754_526afdc1e4_b.jpg


Great shot, the BD just looks so mean. It's in shadows and it still looks more like Arnold than the DX 10.

paramoremcr88
11-29-2013, 01:02 PM
Great shot, the BD just looks so mean. It's in shadows and it still looks more like Arnold than the DX 10.

:exactly:

Love that shot, he looks fantastic there. :clap

S. Griffin
11-29-2013, 01:03 PM
I Hate UPS, it's sitting at my local facility and they won't let me pick it up today because it's scheduled for a Monday delivery and I'll prob be at work when they attempt delivery. Has anyone ever had their UPS guy leave it despite the "signature required" aspect?

At least you can tell where yours is. The latest tracking info for mine is still just "Cerritos, CA, United States 11/23/2013 2:17 A.M. Departure Scan." Six days later and :dunno

paramoremcr88
11-29-2013, 01:11 PM
Sorry guys, more pics! I can't stop taking pics of him!

http://i1285.photobucket.com/albums/a582/paramoremcr88/2572f5d615a8547cb5465b1a06d732e3_zpsa8e890c8.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/8e2c7faf32087d3596913a185bcfe066_zpseed28349.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/b57aca2657c70a306ca6172b2000cfa5_zps98037811.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/c74f9d15c3000da4f18e2526fc57cde2_zps1f49a81d.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/f06f4538aea09862514fb1827f7b1b3a_zps6da67bff.jpg

DiFabio
11-29-2013, 01:16 PM
My eye is already starting to dim a bit and I've barely hit the switch. I swapped out batteries with fresh ones and, wouldn't you know it the eye is much brighter.

I was thinking it would have been cool if they put in orange lights on the base to simulate the Steel Mill instead of the old and tired blue/white DX lights. It wouldn't have hurt them to change it up a bit. I do like the steel grated base though. It's much better than the crappy Tron base that came with the DX 10. I might buy extras if they're cheap enough for my other Terminators.

guyver1
11-29-2013, 01:25 PM
Sorry guys, more pics! I can't stop taking pics of him!

http://i1285.photobucket.com/albums/a582/paramoremcr88/2572f5d615a8547cb5465b1a06d732e3_zpsa8e890c8.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/8e2c7faf32087d3596913a185bcfe066_zpseed28349.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/b57aca2657c70a306ca6172b2000cfa5_zps98037811.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/c74f9d15c3000da4f18e2526fc57cde2_zps1f49a81d.jpg

http://i1285.photobucket.com/albums/a582/paramoremcr88/f06f4538aea09862514fb1827f7b1b3a_zps6da67bff.jpg

Keep them coming You got skill Paramore! :clap

I should be getting mine next week

Maybe we can swap pose ideas :wave

Does the new muscle body feel heavy, I remember the MMS T-2 felt like a rock IMO and I missed DX-10

a-dev
11-29-2013, 01:30 PM
well today wasn't the day for me:( the knobheads sorted it to the wrong depot, so it has to be re-routed to my local depot. So looks like i may have to drive over tomorrow. Also the customs+handling on mine is £18

Man you have a crap time with collectibles. UK customs are real [email protected], I feel pretty lucky.


Congrats to all who own this great piece, I myself do not yet.

For those who do, I challenge you to stuff the extra arm piece behind his back to achieve this.... :hi5:

http://www.imfdb.org/images/thumb/0/09/T2GoodOlArney-4.jpg/600px-T2GoodOlArney-4.jpg

That looks pretty awful doesn't it. In a way it made him look more ****ed up than he really was. I might try it for a laugh.


Sorry guys, more pics! I can't stop taking pics of him!

You low-life scum! Posting quality pics all the time, why don't you just **** off!

:monkey3

Stealth V3teran
11-29-2013, 01:34 PM
Man you have a crap time with collectibles. UK customs are real [email protected], I feel pretty lucky.


:exactly: usually stuff breezes through customs but this and the 1/4 gave me problems. Im starting to think the monkeys in customs are catching on that the sizes of the box and the invoice don't quite match.

vodoun
11-29-2013, 01:38 PM
I love these pastels. The jacket is lovely and matt now. a-dev, did you have Sky TV in the 90s and remember the battle damage jacket competition?

a-dev
11-29-2013, 01:38 PM
The people in Irish customs really just seem to take the stated value at face...value. They don't question it at all.

DiFabio
11-29-2013, 01:38 PM
http://www.imfdb.org/images/thumb/0/09/T2GoodOlArney-4.jpg/600px-T2GoodOlArney-4.jpg


This is the only moment I hate with the T-800 in T2.

The look on his face, his expression, the "I need a vacation line", it's just stupid. He never even learned that phrase. It always bothered the hell out of me that he quipped about being ****ed up. I think it would have been better/sadder if they went with the more pathetic angle of literally having those servos in his legs fail a couple of times and him struggling to get up, then have the scene play out as it did.

a-dev
11-29-2013, 01:39 PM
I love these pastels. The jacket is lovely and matt now. a-dev, did you have Sky TV in the 90s and remember the battle damage jacket competition?

No, what was that?

a-dev
11-29-2013, 01:42 PM
This is the only moment I hate with the T-800 in T2.

The look on his face, his expression, the "I need a vacation line", it's just stupid. He never even learned that phrase. It always bothered the hell out of me that he quipped about being ****ed up. I think it would have been better/sadder if they went with the more pathetic angle of literally having those servos in his legs fail a couple of times and him struggling to get up, then have the scene play out as it did.

I've always let that line go.

More obscure perhaps but a line I don't like is 'of course, I'm a Terminator'. When John says ''Jesus you were gonna kill that guy!'' I'd have preferred if the T-800 had responded with silent confusion. Something has never seemed machine-like about the response he gives.

paramoremcr88
11-29-2013, 01:43 PM
Keep them coming You got skill Paramore! :clap

I should be getting mine next week

Maybe we can swap pose ideas :wave

Does the new muscle body feel heavy, I remember the MMS T-2 felt like a rock IMO and I missed DX-10

Thanks guyver! :hi5:

I'll certainly look forward to seeing what poses you come up with, they're always great. :exactly:

I'm not too sure about the weight differences between the T-800s. This feels like it has a nice weight to it.


You low-life scum! Posting quality pics all the time, why don't you just **** off!

:monkey3

:rotfl :rotfl

guyver1
11-29-2013, 01:56 PM
[QUOTE=paramoremcr88;6319462]Thanks guyver! :hi5:

I'll certainly look forward to seeing what poses you come up with, they're always great. :exactly:

I'm not too sure about the weight differences between the T-800s. This feels like it has a nice weight to it.


I got some ideas already, I got to remember this is a character that uses subtle extreme moves, I'm not expecting him to do flips and tumbles. I think I got to gear my mind back into Batman keaton mode, where the figure does more subtle moves by design.

It will be hard since my last five or six HTs are that came out and I got are characters that are built for extreme posing, I think this will be fun :lol

playboy409
11-29-2013, 02:19 PM
This is the only moment I hate with the T-800 in T2.

The look on his face, his expression, the "I need a vacation line", it's just stupid. He never even learned that phrase. It always bothered the hell out of me that he quipped about being ****ed up. I think it would have been better/sadder if they went with the more pathetic angle of literally having those servos in his legs fail a couple of times and him struggling to get up, then have the scene play out as it did.

agreed. He should not be making these witty lines. I never noticed how he tucked his arm behind his back. Thanks for ruining the movie magic for me!! Lol

TheFiend
11-29-2013, 02:26 PM
The MMS 117 looks better than the real leather. :lol


Crazy how great their first attempt at the jacket was compared to the later "real leather" ones. I love the subtle weathering they used on the original Uncle Bob.

They do. I'm glad I had an extra set when I bought the DX10. I switched them out along with the boots( which also has better weathering) as soon as I received him. The MMS pistol and shotty also has a better finish/wood grain than the DX counterparts.


My eye is already starting to dim a bit and I've barely hit the switch. I swapped out batteries with fresh ones and, wouldn't you know it the eye is much brighter.


It's like that with my antenna with Luke. It stays bright for about minute then dims considerably. I thought it may have been the lights themselves but I'll get some new batteries and see how it goes.

a-dev
11-29-2013, 02:28 PM
The eye being dimmer suits this version of the T-800 though. I was actually a tad disappointed that it was the usual super-bright LED.

Leon 911
11-29-2013, 02:36 PM
I was seeing some pics of the enterbay 1/4. I know the scale is easier to play around when it comes to accuracy, but i think they did a great job on the paint work and the coloring. Intricate, well defined and if there is a trait like "soothing to the eye" they nailed it...

That makes me wonder... Will enterbay survive this competition. They clearly do a great job and some of their figures are magic but they will or are not winning the license war. They also can't do any customs like many other custom guys make. Which means they are doing sideline stuff like nba, etc and if they dont revamp or improvise ... They will be an easy acquisition target or even fade away.

It's such a shame as i am hoping for a day when we have two firms directly competing for our business in the same scale and on figures we love. Enterbay was that wild card for me and i was rooting for it to knock hot toys out for a few matches here or there... Just so that we have options.


Sent from my iPad using Tapatalk HD

Johnny Utah
11-29-2013, 02:44 PM
I'm hoping they announce some new kickass licenses or figures around Xmas this year. RoboCop aside, 2013 really has been quite forgettable from HT. It really has.

guyver1
11-29-2013, 02:44 PM
I was seeing some pics of the enterbay 1/4. I know the scale is easier to play around when it comes to accuracy, but i think they did a great job on the paint work and the coloring. Intricate, well defined and if there is a trait like "soothing to the eye" they nailed it...

That makes me wonder... Will enterbay survive this competition. They clearly do a great job and some of their figures are magic but they will or are not winning the license war. They also can't do any customs like many other custom guys make. Which means they are doing sideline stuff like nba, etc and if they dont revamp or improvise ... They will be an easy acquisition target or even fade away.

It's such a shame as i am hoping for a day when we have two firms directly competing for our business in the same scale and on figures we love. Enterbay was that wild card for me and i was rooting for it to knock hot toys out for a few matches here or there... Just so that we have options.


Sent from my iPad using Tapatalk HD

I like EB as well for the paint jobs, for some bodies not so sure. The Bruce Lee figures and the NBA ones have good frames but what I read about other characters like MIB have had weak joints.

For the scale, I would like to get more 1/4 scale figures but I just don't have enough room to display them. :slap Of course the prices for 1/4 either HT or EB is a problem as well.

vodoun
11-29-2013, 02:47 PM
No, what was that?

After the film done it's run in the cinemas it came to Sky and because of that they were running the battle damage jacket competition from Planet Hollywood?

I loved those adverts. I can't even remember much of the competition. 92 - 93…

http://farm6.staticflickr.com/5475/11122710653_be161ff9f2_b.jpg
http://farm8.staticflickr.com/7426/11122613994_5e5d420e13_b.jpg
http://farm3.staticflickr.com/2827/11122579046_aabaedd265_h.jpg
http://farm4.staticflickr.com/3760/11122627405_3465dde38b_h.jpg

ONEYE
11-29-2013, 03:43 PM
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/Box/0.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/Box/1.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/Box/2.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/Box/3.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/Box/4.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/Box/5.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/Box/6.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/Box/7.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/Box/8.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/Box/9.jpg

ONEYE
11-29-2013, 03:43 PM
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/T-1000/1.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/T-1000/2.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/T-1000/3.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/T-1000/4.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/T-1000/5.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/T-1000/6.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/T-1000/7.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/T-1000/8.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/T-1000/9.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/T-1000/10.jpg

ONEYE
11-29-2013, 03:44 PM
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/T-1000/11.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/FinaleHead/1.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/FinaleHead/2.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/FinaleHead/3.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/FinaleHead/4.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/FinaleHead/5.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/FinaleHead/6.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/FinaleHead/7.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/FinaleHead/8.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/FinaleHead/9.jpg

ONEYE
11-29-2013, 03:45 PM
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/FinaleHead/11.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/FinaleHead/12.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/FinaleHead/13.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/1.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/2.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/3.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/4.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/5.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/6.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/7.jpg

ONEYE
11-29-2013, 03:45 PM
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/8.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/9.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/10.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/11.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/12.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/13.jpg

Ren_dog
11-29-2013, 04:06 PM
NICE PIXS ONEYE :clap Mine will be here Dec 2:thud: Cant wait!:yess:

Nintenjoe
11-29-2013, 04:54 PM
I wasn't interested in getting this figure at all after seeing the prototype pics but all these in hand pics are definitely swaying my opinion.

Mr Walker
11-29-2013, 05:00 PM
One thing I don't understand... is that a swatch of fabric they've included in the box?

Invictus Sol
11-29-2013, 05:00 PM
Nice shots, ONEYE. Very comprehensive. Like the format of starting with the packaging to the details of the actual figure.



I wasn't interested in getting this figure at all after seeing the prototype pics but all these in hand pics are definitely swaying my opinion.
It's even better in-hand. Arnold likeness is amazing and a must-own if you like T2, IMO.




One thing I don't understand... is that a swatch of fabric they've included in the box?
Yeah, just supposed to represent his bullet ridden leathers. It's really the only meh thing about the whole package. It's in the same spot as the separating cardboard "T2" piece that revealed Arnold's face on the DX10.

a-dev
11-29-2013, 05:27 PM
It's even better in-hand. Arnold likeness is amazing and a must-own if you like T2, IMO.

Everything except the excessive blood is better in person than the pics show. The PERS is better, the skin paint apps are better, the overall likeness is better.

Hologram AI
11-29-2013, 05:42 PM
Is it Monday yet? :banghead

a-dev, how do you have all your T-800's displayed? Don't you have about 15 now? :lol Where do you display them all?

a-dev
11-29-2013, 06:00 PM
Is it Monday yet? :banghead

a-dev, how do you have all your T-800's displayed? Don't you have about 15 now? :lol Where do you display them all?

Under the covers with me.

Naw seriously, answer is 'badly'. Disorganised, all over the place, where ever they happen to fit until such time as I get proper shelves/cases for them - which I think will be next year.

Yeah, 'bout 15 T2 T-800s :monkey3

OSCORP
11-29-2013, 06:02 PM
Has the regular started shipping yet?

a-dev
11-29-2013, 06:12 PM
Has the regular started shipping yet?

Yeah, I got one from Sideshow.

Leon 911
11-29-2013, 06:13 PM
Under the covers with me.

Naw seriously, answer is 'badly'. Disorganised, all over the place, where ever they happen to fit until such time as I get proper shelves/cases for them - which I think will be next year.

Yeah, 'bout 15 T2 T-800s :monkey3

Shelves are always a challenge. If no dioramas i have seen detolfs are the best bet, but i see they are sold out everywhere (at least in us). However you may need completely different shelves cause of those beautiful dioramas.


Sent from my iPad using Tapatalk HD

kenobryan
11-29-2013, 06:14 PM
Has the regular started shipping yet?

Mine is coming on Monday. I jumped on this way too late :/


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

johnnycage46
11-29-2013, 07:00 PM
Mine will arrive Tuesday! This thing cannot get here fast enough! Now to decide if I should wait until Christmas to open it...

JacktheRipper
11-29-2013, 07:01 PM
I haven't opened my Cyberdyne version so I don't know how the clothes are on that one, but I'm liking the jacket on the MMS117 slightly better. I like the fit of the pants better on the DX13. Way too tight on the MMS117.
I know it's suppose to be a machine underneath, but I like the build on this version. First version has too much of a Frankenstein monster build now that I have the DX13.
This guy is also taller than the first figure.
Is that the case with Cyberdyne?

johnnycage46
11-29-2013, 07:05 PM
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/FinaleHead/11.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/FinaleHead/12.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/FinaleHead/13.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/1.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/2.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/3.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/4.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/5.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/6.jpg
http://oneye.unrealspawnboard.com/ONEYE-Kisielka/Terminator/DX13/7.jpg

It's too bad Hot Toys couldn't find a way to make the light-up eye movable AND light-up. I'm wondering if moving his single PERS eye (or would it be SERS...) to the extreme right or left will make the straight-ahead light-up look strange...

a-dev
11-29-2013, 07:30 PM
It's too bad Hot Toys couldn't find a way to make the light-up eye movable AND light-up. I'm wondering if moving his single PERS eye (or would it be SERS...) to the extreme right or left will make the straight-ahead light-up look strange...

Unless it was something that really jarred with you in the film it doesn't look strange. It didn't change direction in the film to my recollection.

johnnycage46
11-29-2013, 07:53 PM
I don't recall it moving either. Just thinking of the look of one eye looking straight-ahead and the other eye looking in another direction. But, hey, he did get his eye f'ed up so it probably didn't even have the ability to move after the T1000 smashed that giant metal slab against his face haha

a-dev
11-29-2013, 08:22 PM
Been wanting to do this for years. Terribly presented and not fully realised but you'll get the idea.

http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5212_zpse928b283.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5212_zpse928b283.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5208_zpsb177bbde.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5208_zpsb177bbde.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5202_zps28c0228b.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5202_zps28c0228b.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5206_zps868fa1d7.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5206_zps868fa1d7.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5214_zpsc4eab6da.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5214_zpsc4eab6da.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5218_zps060ce62c.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5218_zps060ce62c.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5219_zps817c358b.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5219_zps817c358b.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5236_zps208563ac.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5236_zps208563ac.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5243_zpsdb310729.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5243_zpsdb310729.jpg.html)

The floor is a bunch of plastic trays for disposable lighters, all glued together.

Double J
11-29-2013, 08:33 PM
Wow! Nice job ! All you need is a good backdrop that looks like a steel mill and it would be perfect.

Double J
11-29-2013, 08:36 PM
As for the boots not looking weathered. Couldn't you just take some sand paper and scuff them up a little? I think that would make them look like the dx10 boots.

a-dev
11-29-2013, 08:42 PM
As for the boots not looking weathered. Couldn't you just take some sand paper and scuff them up a little? I think that would make them look like the dx10 boots.

Thanks, and yeah you could do this I'm sure. Or scrape them off concrete, the very thing that probably would have given them wear in the film. I'll do this rather than trying to buy MMS117 boots to replace my DX13 ones.

TheFiend
11-29-2013, 08:46 PM
The DX13 boots are less weathered than the DX10? :lol The MMS boots were more weathered than those.

Either way sand paper wont do much but scratch it up. Paint is the way to go. Dry brush some gray or brown depending on what you're looking for.

Sent from my LG-E739 using Tapatalk 2

guyver1
11-29-2013, 08:46 PM
Been wanting to do this for years. Terribly presented and not fully realised but you'll get the idea.

http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5202_zps28c0228b.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5202_zps28c0228b.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5206_zps868fa1d7.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5206_zps868fa1d7.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5214_zpsc4eab6da.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5214_zpsc4eab6da.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5218_zps060ce62c.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5218_zps060ce62c.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5219_zps817c358b.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5219_zps817c358b.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5236_zps208563ac.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5236_zps208563ac.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5243_zpsdb310729.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5243_zpsdb310729.jpg.html)

The floor is a bunch of plastic trays for disposable lighters, all glued together.

That's great!:hi5:

I have mine coming soon. I just realized I have two MMS T2s. So maybe with my spare MMS I'll see what the fuss is about the DX 13 Jackets and boots.

ClipperKing was right after seeing the inhand pics of the DX13 on this thread and looking at my MMS T2, there is a huge difference in the bodies and heads, The MMS version is completely outdated now :slap

I was thinking would the MMS black shirt fit over the DX13 body? I just want to see what it would look like. :dunno

I know it would cover the BD chest, but I just wondered how the DX13 would look if the T-800 used the black shirt for the entire movie.

guyver1
11-29-2013, 08:57 PM
Unless it was something that really jarred with you in the film it doesn't look strange. It didn't change direction in the film to my recollection.

Yeah I have to agree the most I saw the endo eye move around was in the first Terminator film and that was more so after the Endoskeleton was completely exposed. Like when the T-800 Endo skeleton was chasing Sarah and Reese into the mech factory. :lecture

Maybe the hotel scene after he cut his eyeball off as well.

For T2 the eye only moved when the T-1000 drove the metal rod through him like A-dev just did with his figure. The eye just closed and burnt out, so I think that HT's got the look right for the T2 film. :lecture

The Chev
11-29-2013, 08:59 PM
Those pictures are awesome.

guyver1
11-29-2013, 09:08 PM
Okay A-DEV I have to ask..How did you do this?

How did you get the rod to go through the plastic TT body like that :horror
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5218_zps060ce62c.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5218_zps060ce62c.jpg.html)

River Man
11-29-2013, 09:15 PM
Holy crap! Cool pics a-dev!!!

5x10
11-29-2013, 09:49 PM
Holy crap! Cool pics a-dev!!!

:clap
Awesome recreation of the scene

kenobryan
11-29-2013, 09:51 PM
a-dev just made someone a few hundred dollars richer after inspiring me to get that T1000 fig. Ughhhh


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

highlander1
11-29-2013, 10:05 PM
Those last set of pics blew me AWAY! Very cool!

http://i1293.photobucket.com/albums/b588/bender112/tumblr_inline_mlamn9JVyo1qz4rgp_zpse02ecaa5.gif (http://s1293.photobucket.com/user/bender112/media/tumblr_inline_mlamn9JVyo1qz4rgp_zpse02ecaa5.gif.ht ml)

http://i1293.photobucket.com/albums/b588/bender112/tumblr_m1146xTIvu1r5ur0ho1_500_zps4a8df1c7.gif (http://s1293.photobucket.com/user/bender112/media/tumblr_m1146xTIvu1r5ur0ho1_500_zps4a8df1c7.gif.htm l)

:lol

a-dev
11-29-2013, 10:19 PM
Thanks to all of you there. I'd love to do the whole scene properly one day with the 1:1 world of my messy toy room blacked out, with proper movie-specific lighting and with an attempt to copy exact shots from the film


Okay A-DEV I have to ask..How did you do this?

How did you get the rod to go through the plastic TT body like that :horror
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5218_zps060ce62c.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5218_zps060ce62c.jpg.html)

Well that particular T-800 is primarily my old custom that I got about 2 years ago (with the new head on it). Its lower body had already been hollowed out to fit a battery compartment and I was easily able to drill the rest of the way through.

I think in the film the T-1000 stabs him through a little higher than that but I was worried about trying to drill through the upper body.

Rambler
11-29-2013, 10:28 PM
Amazing Pics Dev!!!

I was hoping you would do that set up/scene!!!

guyver1
11-29-2013, 10:37 PM
Thanks to all of you there. I'd love to do the whole scene properly one day with the 1:1 world of my messy toy room blacked out, with proper movie-specific lighting and with an attempt to copy exact shots from the film



Well that particular T-800 is primarily my old custom that I got about 2 years ago (with the new head on it). Its lower body had already been hollowed out to fit a battery compartment and I was easily able to drill the rest of the way through.

I think in the film the T-1000 stabs him through a little higher than that but I was worried about trying to drill through the upper body.

:LOL Ah thought so..I thought wow you had to hollow something out to get something through a TT body..great job!:clap

Leon 911
11-29-2013, 11:05 PM
Thanks to all of you there. I'd love to do the whole scene properly one day with the 1:1 world of my messy toy room blacked out, with proper movie-specific lighting and with an attempt to copy exact shots from the film



Well that particular T-800 is primarily my old custom that I got about 2 years ago (with the new head on it). Its lower body had already been hollowed out to fit a battery compartment and I was easily able to drill the rest of the way through.

I think in the film the T-1000 stabs him through a little higher than that but I was worried about trying to drill through the upper body.

Or you can just buy an extra rod, split in 2 and do a small drill on each side and stick it in.


Sent from my iPad using Tapatalk HD

olbertfrog
11-29-2013, 11:43 PM
Great recreation of the scene.


I finally took the Time to put out all my terminators (save my t1000) and damn the mms hs looks bad now... I was really surprised at how it look so wrong... I had réservations for the dx10 but they are gone... Thnk im gonna buy a dx10 hs and swap the MMS gear on a ttm20 body along with the Head...
My original dx10 Will be galleria version since hes so clean, my MMS dx10 bash Will be cyber dyne gatling version.
As for the boots i swap perd them all.
Dx13 clean boots on galleria
Dx10 light weathering boots on cyberdyne
MMS heavy weathered boots on both bd

i was happy to rediscover in my spare art box that i had another pair of MMS boots, one dx10 bandolier (that i Will make bd), MMS pants, dx10 gloves and other stuff that avoids me to scavange every figures for parts ^^

Now we really need that a customizer do a proper Arnold Head as good as the bd Heads. The dx10 works ok but its would be awesome to get a better hs

a-dev
11-29-2013, 11:44 PM
Or you can just buy an extra rod, split in 2 and do a small drill on each side and stick it in.


Sent from my iPad using Tapatalk HD

Pffft. There's a satisfaction in doing it for real.

Leon 911
11-29-2013, 11:44 PM
Pffft. There's a satisfaction in doing it for real.

Sadist ;)


Sent from my iPad using Tapatalk HD

DEATHASYLUM
11-29-2013, 11:45 PM
Pffft. There's a satisfaction in doing it for real.

I agree & nice work on the pics.

Kovach
11-29-2013, 11:51 PM
Hey guys, do you know anyone in the US that has this in stock? (Besides Sideshow). Maybe a seller in the forum or one of you guys that wants to sell one?

a-dev
11-30-2013, 12:13 AM
Sadist ;)


Sent from my iPad using Tapatalk HD

:lol You've obviously never seen P.'s T1 clothes acquisition scene.


I agree & nice work on the pics.

Thanks. Pics were terrible but I just wanted to show what scene I'm working on and hope to one day have displayed properly.

I just love the whole steel mill part of the film. How cool would dioramas of these bits be?

http://www.leavemethewhite.com/caps/displayimage.php?album=220&pid=102866#top_display_media
http://www.leavemethewhite.com/caps/displayimage.php?album=220&pid=102888#top_display_media
http://www.leavemethewhite.com/caps/displayimage.php?album=220&pid=102893#top_display_media
http://www.leavemethewhite.com/caps/displayimage.php?album=220&pid=102959#top_display_media

DEATHASYLUM
11-30-2013, 12:40 AM
:lol You've obviously never seen P.'s T1 clothes acquisition scene.



Thanks. Pics were terrible but I just wanted to show what scene I'm working on and hope to one day have displayed properly.

I just love the whole steel mill part of the film. How cool would dioramas of these bits be?

http://www.leavemethewhite.com/caps/displayimage.php?album=220&pid=102866#top_display_media
http://www.leavemethewhite.com/caps/displayimage.php?album=220&pid=102888#top_display_media
http://www.leavemethewhite.com/caps/displayimage.php?album=220&pid=102893#top_display_media
http://www.leavemethewhite.com/caps/displayimage.php?album=220&pid=102959#top_display_media

Yeah, I would love the last scene display with Arnie being lowered holding the chain. I have a feeling that dio might happen with you :lol I hope it does and you go all out :duff

paramoremcr88
11-30-2013, 12:44 AM
F'n love those pics a-dev! :rock

Wish I hadn't sold my T-1000 now :slap

petes2177
11-30-2013, 03:07 AM
Not a huge Terminator fanboy, but I loved T2 and I currently don't have a Terminator figure in my collection.

Should I get the DX13? Been on the fence for a while now

paramoremcr88
11-30-2013, 03:11 AM
Not a huge Terminator fanboy, but I loved T2 and I currently don't have a Terminator figure in my collection.

Should I get the DX13? Been on the fence for a while now

Yes, you should. It's an absolutely fantastic set, you won't be disappointed.

tommyh84
11-30-2013, 03:24 AM
Been wanting to do this for years. Terribly presented and not fully realised but you'll get the idea.

http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5212_zpse928b283.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5212_zpse928b283.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5208_zpsb177bbde.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5208_zpsb177bbde.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5202_zps28c0228b.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5202_zps28c0228b.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5206_zps868fa1d7.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5206_zps868fa1d7.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5214_zpsc4eab6da.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5214_zpsc4eab6da.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5218_zps060ce62c.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5218_zps060ce62c.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5219_zps817c358b.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5219_zps817c358b.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5236_zps208563ac.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5236_zps208563ac.jpg.html)
http://i594.photobucket.com/albums/tt28/a-dev/zIMG_5243_zpsdb310729.jpg (http://s594.photobucket.com/user/a-dev/media/zIMG_5243_zpsdb310729.jpg.html)

The floor is a bunch of plastic trays for disposable lighters, all glued together.

Along with Rory's, best pics in this thread :hi5:

Darth_Calibrate
11-30-2013, 03:24 AM
its the ultimate t2, most paint work on a HT t-800 and a VERY custom body, not just your standard head sculpt and some clothing in that sense. The T-1000 addition also sets it above and beyond the usual package.

Compared to other figs this has quite a lot of value for the price.

petes2177
11-30-2013, 03:27 AM
I hope this shows up as "in stock" over at SSC before that $25 coupon expires

DiFabio
11-30-2013, 04:14 AM
Even with that coupon it'll still be 300+.

That's really messed up how they decided to charge more for the regular. Why would it cost more to ship than the exclusive? Why would it be $10 more without the T-1000 ex. Head? Makes no sense. Your luck, it'll come in stock as soon as the coupon expires.

Cap'n Cook
11-30-2013, 04:20 AM
http://i164.photobucket.com/albums/u31/The_Dark_Knight_photos/d41661ffa58accd052c5bc840575a2ce_zps94e8943c.jpg

paramoremcr88
11-30-2013, 04:52 AM
http://i164.photobucket.com/albums/u31/The_Dark_Knight_photos/d41661ffa58accd052c5bc840575a2ce_zps94e8943c.jpg

Looks great, love the pose. :clap

vodoun
11-30-2013, 06:34 AM
Thanks, and yeah you could do this I'm sure. Or scrape them off concrete, the very thing that probably would have given them wear in the film. I'll do this rather than trying to buy MMS117 boots to replace my DX13 ones.


The DX13 boots are less weathered than the DX10? :lol The MMS boots were more weathered than those.

Either way sand paper wont do much but scratch it up. Paint is the way to go. Dry brush some gray or brown depending on what you're looking for.

Sent from my LG-E739 using Tapatalk 2

http://www.ebay.co.uk/itm/Tamiya-Weathering-Pastel-Dry-Brush-for-Plastic-Kit-Master-Set-A-B-C-D-/251389857480?pt=UK_ToysGames_ModelKits_ModelKits_J N&var=550316123895&hash=item3a8800cec8

Sidious-66
11-30-2013, 06:41 AM
Loved seeing those pics you posted a-dev.

That would look great under some nice lighting. Will you be keeping the setup permanent?

DiFabio
11-30-2013, 07:41 AM
You have nothing else to contribute though. It's the same crap in all these T2 threads with you. Digging at the figures, putting down people's pics, critiquing poses. Your whole demeanor is always negative. It doesn't bother me when people have bad things to say about a doll, but every day? I think you've made your point.

Why don't you just stay in the MMS 136 thread and keep posting away about your crappy custom T1 Arnies and obsess over their "fireman" poses. After all, T2 does nothing for you (you claim to "hate it") and you blame Hot Toys for buying a hoard of figures that you can't sell in your area. Right?

TheFiend
11-30-2013, 07:50 AM
^ Yup. At this point P. is trolling.

Sent from my LG-E739 using Tapatalk 2

Voorhees27
11-30-2013, 07:53 AM
http://i164.photobucket.com/albums/u31/The_Dark_Knight_photos/d41661ffa58accd052c5bc840575a2ce_zps94e8943c.jpg

Aaaaaaand action Arnold! No wait, that's an action figure?

http://i535.photobucket.com/albums/ee351/roynajmeddine/7016d47e85af0fdfa6e0409b2c5e7072.jpg

Sweet money shot, Tim!


^ Yup. At this point P. is trolling.

Sent from my LG-E739 using Tapatalk 2

At this point? Good lord. I've seen members banned for much less. I'll be PM'ing cousin Dave shortly.

Darth Snoopy
11-30-2013, 08:03 AM
Thread cleaned and reopened.

Keep it civil. You've been warned.

Cap'n Cook
11-30-2013, 08:04 AM
Thanks paramore! :duff


Aaaaaaand action Arnold! No wait, that's an action figure?

http://i535.photobucket.com/albums/ee351/roynajmeddine/7016d47e85af0fdfa6e0409b2c5e7072.jpg

Sweet money shot, Tim!

:lol


Thanks Roy! :hi5:

Darth_Calibrate
11-30-2013, 08:06 AM
my guy all setup and settled in for the moment, love it, love everything about it

Voorhees27
11-30-2013, 08:09 AM
:lol


Thanks Roy! :hi5:

Still another week or two for me :(

Talk about a brain cramp too. I even have a $40 credit with Sideshow. :thwak As it turns out Toy Square recieves their entire shipment from Sideshow now. Not direct anymore. :gah:

MrArtDept
11-30-2013, 08:10 AM
I guess I missed the party.

I just found this book, I had no idea it existed and it was an immediate buy, I can't wait for it to get here. Wanted to share it with those in the dark like I was:

Terminator Vault: The Complete Story Behind the Making of The Terminator and Terminator 2: Judgement Day



http://ecx.images-amazon.com/images/I/51WGyqDeWhL.jpg

$28.51 on Amazon right now, sweeet!

MrRabba
11-30-2013, 08:12 AM
Picked that up last month, its excellent and well put together!

shells075
11-30-2013, 08:13 AM
Those pics of the DX13 with the T-1000 putting the metal bar through his back are epic. :clap love it.

My DX13 has pretty much been in this pose from day one.
Metal bar in his hand, Endo arm ripped out & ultra battle damaged head.

http://i983.photobucket.com/albums/ae317/mattbidz/DSCF2026_zps9acfbce8.jpghttp://i983.photobucket.com/albums/ae317/mattbidz/DSCF2027_zpsfb59b79c.jpg

I think when I get my second DX13 I will use the other head and maybe put the M-16 in his hand, so I can recreate his look when he is shooting the T-1000, when he is on the truck.

http://www.imfdb.org/images/thumb/6/6a/T2JDColtCommando-18.jpg/601px-T2JDColtCommando-18.jpg

Voorhees27
11-30-2013, 08:18 AM
^ One of the most amazing action scenes in any movie. Arnies stuntman in T2 had zero limits.

BadMuthaDude
11-30-2013, 08:18 AM
Still another week or two for me :(

Talk about a brain cramp too. I even have a $40 credit with Sideshow. :thwak As it turns out Toy Square recieves their entire shipment from Sideshow now. Not direct anymore. :gah:

That sucks. I liked getting my orders from Toys2 since they shipped at the same time as Sideshow, sometimes earlier, and there were no import fee surprises. The trade off was HST though. It's not worth it now. The prices are so close now that it comes to roughly the same as Sideshow and if they aren't getting them any sooner, there's no point at all, really.


I guess I missed the party.

I just found this book, I had no idea it existed and it was an immediate buy, I can't wait for it to get here. Wanted to share it with those in the dark like I was:

Terminator Vault: The Complete Story Behind the Making of The Terminator and Terminator 2: Judgement Day (http://www.amazon.com/gp/product/0760344760?ie=UTF8&camp=1789&creativeASIN=0760344760&linkCode=xm2&tag=aintitcooln0b-20)



http://ecx.images-amazon.com/images/I/51WGyqDeWhL.jpg

$28.51 on Amazon right now, sweeet!

Damn it, I forgot about that book and my wife is already done Xmas shopping for me. I failed.

kenobryan
11-30-2013, 08:23 AM
Pretty cool :

http://www.youtube.com/watch?v=RZl1HNwe33Q

Sidious-66
11-30-2013, 08:24 AM
Damn it, I forgot about that book and my wife is already done Xmas shopping for me. I failed.

Lie, steal, cheat do anything possible to persuade her mate. :lol

shells075
11-30-2013, 08:52 AM
Pretty cool :

http://www.youtube.com/watch?v=RZl1HNwe33Q

Lol I love that. :clap

Snake Plissken
11-30-2013, 08:57 AM
I think when I get my second DX13 I will use the other head and maybe put the M-16 in his hand, so I can recreate his look when he is shooting the T-1000, when he is on the truck.

http://www.imfdb.org/images/thumb/6/6a/T2JDColtCommando-18.jpg/601px-T2JDColtCommando-18.jpg

That was always one of my favorite bad *** scenes from T2.

Cap'n Cook
11-30-2013, 09:06 AM
Still another week or two for me :(

Talk about a brain cramp too. I even have a $40 credit with Sideshow. :thwak As it turns out Toy Square recieves their entire shipment from Sideshow now. Not direct anymore. :gah:

:(

It will be WELL worth the wait mate. This is mind blowing in hand.

paramoremcr88
11-30-2013, 09:24 AM
Just put this video together. If you like the T2 soundtrack, turn your speakers up! :rock

http://youtu.be/MNeTEfOcOc4

Cap'n Cook
11-30-2013, 09:27 AM
Awesome stuff! :duff

Double J
11-30-2013, 09:29 AM
UPS says he is one state over from me now. But still gotta wait untill Tuesday :gah:

a-dev
11-30-2013, 09:35 AM
http://www.ebay.co.uk/itm/Tamiya-Weathering-Pastel-Dry-Brush-for-Plastic-Kit-Master-Set-A-B-C-D-/251389857480?pt=UK_ToysGames_ModelKits_ModelKits_J N&var=550316123895&hash=item3a8800cec8

Thanks for that, I've put it on watch.


Loved seeing those pics you posted a-dev.

That would look great under some nice lighting. Will you be keeping the setup permanent?

Yeah. Not there on that messy 'desk' ideally, that's my current laptop station. I'd like to put it somewhere that I can set up some cinematic lighting for it. And probably at about an eye-level height.


You have nothing else to contribute though. It's the same crap in all these T2 threads with you. Digging at the figures, putting down people's pics, critiquing poses. Your whole demeanor is always negative. It doesn't bother me when people have bad things to say about a doll, but every day? I think you've made your point.

Why don't you just stay in the MMS 136 thread and keep posting away about your crappy custom T1 Arnies and obsess over their "fireman" poses. After all, T2 does nothing for you (you claim to "hate it") and you blame Hot Toys for buying a hoard of figures that you can't sell in your area. Right?

Jesus, the thread was closed? WTF happened? Can someone PM me.

ApeManRyan
11-30-2013, 09:35 AM
Just put this video together. If you like the T2 soundtrack, turn your speakers up! :rock

http://youtu.be/MNeTEfOcOc4

Awesome video man!:clap:clap:clap

Voorhees27
11-30-2013, 09:42 AM
Jesus, the thread was closed? WTF happened? Can someone PM me.

Take a guess. What rhymes with P?

a-dev
11-30-2013, 09:50 AM
I need all the goss when someone has the time to PM.

highlander1
11-30-2013, 10:09 AM
All the great pics have made the wait even longer...only 2 more days and 16 hours until the package is delivered roughly.....:impatient::lol

highlander1
11-30-2013, 10:14 AM
What are doing with all the t1000 statues A-dev any idea's yet? maybe him fighting all 2 or 3

a-dev
11-30-2013, 10:17 AM
What are doing with all the t1000 statues A-dev any idea's yet?

I'm gonna end up with 4 of them. I've decided to not go beyond that as far as buying complete figures, the boxes would take up so much space.

2 will stay in the boxes and the other two I'll keep out, one with the normal head and one with the exclusive head.

highlander1
11-30-2013, 10:21 AM
I just hope they dont have any paint issue's mine's goin direct in the cabinet. I'm sure they will be in demand after this is sold out. Best to keep safely in box good plan..back ups

guyver1
11-30-2013, 10:27 AM
So I never got the MMS136 T-1 figure. For those that did, where would you classify that sculpt in terms of character and Arnold likeness.

The DX 13 would be top of course as far best likeness to the film so far. You know they still can do a T3 Arnold, even though the movie sucked.

But where would you put the T-1? Above or below the DX 10 :dunno

Also for the die hard Terminator experts was T-1 and the T-800 the same type of terminator, because they seemed the same.

I know in T3 the terminator was more advanced right?

a-dev
11-30-2013, 10:28 AM
I just hope they dont have any paint issue's mine's goin direct in the cabinet. I'm sure they will be in demand after this is sold out. Best to keep safely in box good plan..back ups

I really do love that statue. That chrome is so beautiful, it all looks exactly like what its supposed to look like.

I feel greedy now, I'd love them to make more chrome T-1000 statues. One fully standing and shaped steel mill Robert Patrick, one reforming after the freeze and shatter, one for my Pescadero elevator etc etc. Alas I don't think any of that will happen.

highlander1
11-30-2013, 10:30 AM
I may add some mirror film or a mirror for a floor for it. You could cut the mirror film to shape with the statue.When you apply to any glass surface.

DiFabio
11-30-2013, 10:31 AM
I'd but 1/6 chrome statues of T-1000 by themselves. All the different types. Pretzel man too since that couldn't be a figure.

guyver1
11-30-2013, 10:37 AM
Is eBay the only way to get a t-1000 at this point now?

highlander1
11-30-2013, 10:38 AM
Yes i kinda wish had more options with the t1000 ,but if they did wouldnt look right. If had a change out arm to one body shape when 1st reforms back. I just hope if they revist the t1000 he's a dx his eyes would be great for pic's if it turned out great. Also want the hasta la vista statue included so jealous of that custom frosty t1000 version.

a-dev
11-30-2013, 10:39 AM
So I never got the MMS136 T-1 figure. For those that did, where would you classify that sculpt in terms of character and Arnold likeness.

The DX 13 would be top of course as far best likeness to the film so far.

But where would you put the T-1? Above or below the DX 10 :dunno

Oooohhh! A likeness comparison.

DX13 easily wins, yes.

To be honest I'm just not sure anymore between DX10 and MMS136. Both have flaws. DX10 corrected the square face but brought with it new problems. Its a case of which problems are less annoying.

MMS136 is less toy-like in its execution. It might have an edge there.

guyver1
11-30-2013, 10:42 AM
Yes i kinda wish had more options with the t1000 ,but if they did wouldnt look right. If had a change out arm to one body shape when 1st reforms back. I just hope if they revist the t1000 he's a dx his eyes would be great for pic's if it turned out great. Also want the hasta la vista statue included so jealous of that custom frosty t1000 version.

Not just the frosty version I wouldn't mind if HT did a liquid full body form figure of the 1000 in either uniform or motorcycle cop gear.

highlander1
11-30-2013, 10:46 AM
Loved the helicopter scene . GET OUT! :horror :lol

guyver1
11-30-2013, 10:48 AM
Oooohhh! A likeness comparison.

DX13 easily wins, yes.

To be honest I'm just not sure anymore between DX10 and MMS136. Both have flaws. DX10 corrected the square face but brought with it new problems. Its a case of which problems are less annoying.

MMS136 is less toy-like in its execution. It might have an edge there.

IDK from what I've seen of the DX10, something just seems off, maybe Clipperking was right, maybe the problem was that the head was smaller. From what I've seen from pics the hair looks off as well of the eyes.

a-dev
11-30-2013, 10:49 AM
Yes i kinda wish had more options with the t1000 ,but if they did wouldnt look right. If had a change out arm to one body shape when 1st reforms back. I just hope if they revist the t1000 he's a dx his eyes would be great for pic's if it turned out great. Also want the hasta la vista statue included so jealous of that custom frosty t1000 version.

It couldn't be posable, that'd ruin the effect. A series of statues would be best. If we only end up with one I think they chose the best one for that scene with the T-800.

highlander1
11-30-2013, 10:51 AM
I wonder if called a trophy place if they could make a differnt t1000 version if asked them?

guyver1
11-30-2013, 10:55 AM
Loved the helicopter scene . GET OUT! :horror :lol

:exactly: I don't think Ht is done just yet, especially if the DX 13 sells well which I don't see why not even with the huge price tag.

T3 might be coming around the corner.

How about a TX?

I know this is a long shot, but HT could do their version of a Harley from the film.

krec9
11-30-2013, 10:56 AM
^ One of the most amazing action scenes in any movie. Arnies stuntman in T2 had zero limits.

:exactly: love the bike jump he does also.

Invictus Sol
11-30-2013, 11:02 AM
:exactly: I don't think Ht is done just yet, especially if the DX 13 sells well which I don't see why not even with the huge price tag.

T3 might be coming around the corner.

How about a TX?

I know this a long shot, but HT could do their version of a Harley from the film.
Honestly I hope HT forgets T3 ever happened (and it sounds from what I've seen posted here that they don't want to pursue it). I thought Arnold no longer really looked right in the role and the TX... ugh. No desire to see her in any format ever.

There's still cool stuff they could do with T1 and 2, so hope they stick with that.

a-dev
11-30-2013, 11:03 AM
I wonder if called a trophy place if they could make a differnt t1000 version if asked them?

That would be cool.

highlander1
11-30-2013, 11:05 AM
I'll call a trophy store next week see what they say about price's and doubt can afford a custom but will research or ask what they could do and let all know whats up.

DiFabio
11-30-2013, 11:06 AM
They said they weren't making T3 stuff, but I bet they do eventually.

tominator56
11-30-2013, 11:08 AM
Here's my contribution.

http://i20.photobucket.com/albums/b220/RSTG65TOM/instaarnie.jpg (http://s20.photobucket.com/user/RSTG65TOM/media/instaarnie.jpg.html)

http://i20.photobucket.com/albums/b220/RSTG65TOM/instaarnie2.jpg (http://s20.photobucket.com/user/RSTG65TOM/media/instaarnie2.jpg.html)

TheFiend
11-30-2013, 11:14 AM
Aaaaaaand action Arnold! No wait, that's an action figure?

http://i535.photobucket.com/albums/ee351/roynajmeddine/7016d47e85af0fdfa6e0409b2c5e7072.jpg

Sweet money shot, Tim!



At this point? Good lord. I've seen members banned for much less. I'll be PM'ing cousin Dave shortly.


:lol Well I was trying to be fair. His initial critiques on the figure was all right. Anyone can go into any thread and give their thoughts on something regardless if it's a license they're into or not. But it's been days now and P. is still here being negative and it's a movie he professes to hate.

Either way, you'd be hard pressed to find me in any thread for a license/movie etc. I don't care for. I bet I have under 10 posts in the entire Marvel section


edit: Scratch that. I have the KO Punisher figure on PO. :lol

guyver1
11-30-2013, 11:15 AM
Here's my contribution.

http://i20.photobucket.com/albums/b220/RSTG65TOM/instaarnie.jpg (http://s20.photobucket.com/user/RSTG65TOM/media/instaarnie.jpg.html)

http://i20.photobucket.com/albums/b220/RSTG65TOM/instaarnie2.jpg (http://s20.photobucket.com/user/RSTG65TOM/media/instaarnie2.jpg.html)

Nice did you use Photobucket editor for the frame?

shells075
11-30-2013, 11:18 AM
So I never got the MMS136 T-1 figure. For those that did, where would you classify that sculpt in terms of character and Arnold likeness.

The DX 13 would be top of course as far best likeness to the film so far. You know they still can do a T3 Arnold, even though the movie sucked.

But where would you put the T-1? Above or below the DX 10 :dunno

Also for the die hard Terminator experts was T-1 and the T-800 the same type of terminator, because they seemed the same.

I know in T3 the terminator was more advanced right?

Well you got 2 head sculpts with the T1 and I'm split on which is the best. maybe the bloody eye sculpt is marginally better :dunno

My only criticism with the DX13 sculpt is the hair looks kind of weird, and it just seems idk 5-10% too big, anyone else think that?

The DX10 sculpt looks like an Arnie look a like imo, a little paint app can help to bring out his check bones a bit but overall its a fairly weak sculpt.

I still luv my 136 though, it was my first Hot Toys Terminator figure and at the time it just blew me away, its still a very respectable figure. A T1 DX Arnie is long overdue though.

tominator56
11-30-2013, 11:19 AM
Nice did you use Photobucket editor for the frame?

Pictures taken on my phone using instagram. The effects are added on there, uploaded to photobucket then posted to here :yess:

a-dev
11-30-2013, 11:28 AM
Well you got 2 head sculpts with the T1 and I'm split on which is the best. maybe the bloody eye sculpt is marginally better :dunno

My only criticism with the DX13 sculpt is the hair looks kind of weird, and it just seems idk 5-10% too big, anyone else think that?

The DX10 sculpt looks like an Arnie look a like imo, a little paint app can help to bring out his check bones a bit but overall its a fairly weak sculpt.

I still luv my 136 though, it was my first Hot Toys Terminator figure and at the time it just blew me away, its still a very respectable figure. A T1 DX Arnie is long overdue though.

Yeah of the two T1 sculpts I prefer the bloody eye version myself.

I don't think the hair on DX13 is too long, I think its a bit too short on the front if anything. The problem with it is its all too even, if they had put more definition to some of the spikes it'd be better. Basically they should have copied Enterbay's hair exactly (on the BD version! Very important, not the clean version)

spindrift
11-30-2013, 11:41 AM
I'd love a TX myself- as long as likeness and bust size are movie accurate....

guyver1
11-30-2013, 12:01 PM
Well you got 2 head sculpts with the T1 and I'm split on which is the best. maybe the bloody eye sculpt is marginally better :dunno

My only criticism with the DX13 sculpt is the hair looks kind of weird, and it just seems idk 5-10% too big, anyone else think that?

The DX10 sculpt looks like an Arnie look a like imo, a little paint app can help to bring out his check bones a bit but overall its a fairly weak sculpt.

I still luv my 136 though, it was my first Hot Toys Terminator figure and at the time it just blew me away, its still a very respectable figure. A T1 DX Arnie is long overdue though.


Hmmm..what more could they do with T1 besides a light up endo eye and maybe the infamous " F### YOU A##HOLE! " scene.

Oh yearI guess the police station massacre look right?

guyver1
11-30-2013, 12:04 PM
I'd love a TX myself- as long as likeness and bust size are movie accurate....

:exactly: we all know HT will be coming out with more females and they will only improve on it so why not a TX :lecture

shells075
11-30-2013, 12:08 PM
Well you got 2 head sculpts with the T1 and I'm split on which is the best. maybe the bloody eye sculpt is marginally better :dunno

My only criticism with the DX13 sculpt is the hair looks kind of weird, and it just seems idk 5-10% too big, anyone else think that?

The DX10 sculpt looks like an Arnie look a like imo, a little paint app can help to bring out his check bones a bit but overall its a fairly weak sculpt.

I still luv my 136 though, it was my first Hot Toys Terminator figure and at the time it just blew me away, its still a very respectable figure. A T1 DX Arnie is long overdue though.


Hmmm..what more could they do with T1 besides a light up endo eye and maybe the infamous " F### YOU A##HOLE! " scene.

Oh yearI guess the police station massacre look right?

Or after Arnie gets run over by the Tanker and he is all mangled up.

http://i1313.photobucket.com/albums/t552/alechaines1/Things/Terminator19841_zps47f68841.jpghttp://i1313.photobucket.com/albums/t552/alechaines1/Things/theterminator84_zpsfe74595f.png

guyver1
11-30-2013, 12:15 PM
[quote=guyver1;6321257]

Or after Arnie gets run over by the Tanker and he is all mangled up.

http://i1313.photobucket.com/albums/t552/alechaines1/Things/Terminator19841_zps47f68841.jpghttp://i1313.photobucket.com/albums/t552/alechaines1/Things/theterminator84_zpsfe74595f.png

:rotfl :goodpost:

I forgot that one

I think the Police station massacre would be the T1 DX

Invictus Sol
11-30-2013, 12:22 PM
:exactly: we all know HT will be coming out with more females and they will only improve on it so why not a TX :lecture
You never know, I guess. Certainly I've got no problem with it for those that would like a TX. Speaking for myself, the movie was garbage and she wasn't intimidating as a Terminator, so no chance I'd be interested. Just don't see what she adds to the franchise or to a Terminator collection.

BadMuthaDude
11-30-2013, 12:26 PM
I've said before that I would buy T3 figures. Still would. Definite yes on a clean and full bd T-850, yes to a T-X, and maybe to a T-X endo. Anything else outside of T1 and T2 is a no.

a-dev
11-30-2013, 12:37 PM
T-850's for sure. Maybe not the TX though.

guyver1
11-30-2013, 12:39 PM
T-850's for sure. Maybe not the TX though.

T-850 jacket for sure! :clap

I still have my 12" McFarlane T-850 lying around somewhere

The m-16 that comes with the DX13 is sweet. Not even SS G.I.JOE has come out with a rifle that accurate looking.

guyver1
11-30-2013, 12:48 PM
T-850's for sure. Maybe not the TX though.

What sucked about the TX was the outfit they chose for her. Loken had a killer body and the outfit was a buzzkill. :thud:

The Female Endo might look cool

Invictus Sol
11-30-2013, 12:55 PM
I've said before that I would buy T3 figures. Still would. Definite yes on a clean and full bd T-850, yes to a T-X, and maybe to a T-X endo. Anything else outside of T1 and T2 is a no.
Good point, T-X endo was cool and would look pretty neat on display (especially with some weaponized switch-out limbs). All comes back to that horrible movie, though, so I'd still probably give it a pass. Trying hard to keep a bit of focus and not keep creeping out further and further from what I consider essential.

Snake Plissken
11-30-2013, 12:56 PM
I've said before that I would buy T3 figures. Still would. Definite yes on a clean and full bd T-850, yes to a T-X, and maybe to a T-X endo. Anything else outside of T1 and T2 is a no.

It's not the best Terminator film, but I'd probably buy an Arnold from it for sure.

a-dev
11-30-2013, 12:57 PM
I was always pretty meh about the TX endo.

Battle damaged T-850 though, that's too cool regardless of the overall quality of the film. I really hope it happens.

guyver1
11-30-2013, 01:03 PM
I was always pretty meh about the TX endo.

Battle damaged T-850 though, that's too cool regardless of the overall quality of the film. I really hope it happens.

Hard to believe Claire Danes was in that film for any of you current Homeland fans and retro lovers of My So Called Life like me :lol

She's come a long way in her career.

guyver1
11-30-2013, 01:19 PM
Anyways back to the topic, is the mini gun on DX 10 the same one that came with this T-1. If so, when I get my DX13 I want to pose it with the mini gun despite he wasn't BD when he used it in T2.

http://i270.photobucket.com/albums/jj83/guyver12/IMG_0620.jpg (http://s270.photobucket.com/user/guyver12/media/IMG_0620.jpg.html)

shells075
11-30-2013, 02:01 PM
The coffin would be a nice accessory.


http://t3.gstatic.com/images?q=tbn:ANd9GcRwhOKhxjVAkYLOx99EYP29pAo8Y9c0m FcNQVXhfa8C4t1fTWzaWg:exactly:

I doubt HT will touch that film though.

Snake Plissken
11-30-2013, 02:06 PM
I'd really like the BD version from the end of the film. Since it was the most Arnie had Endo exposed, without actually being fleshless.

guyver1
11-30-2013, 02:26 PM
I'd really like the BD version from the end of the film. Since it was the most Arnie had Endo exposed, without actually being fleshless.

Yeah this would be intersting
http://i270.photobucket.com/albums/jj83/guyver12/guyver12016/image.jpg (http://s270.photobucket.com/user/guyver12/media/guyver12016/image.jpg.html)

http://i270.photobucket.com/albums/jj83/guyver12/guyver12017/image.jpg (http://s270.photobucket.com/user/guyver12/media/guyver12017/image.jpg.html)

I still like this
http://i270.photobucket.com/albums/jj83/guyver12/guyver12016/image-1.jpg (http://s270.photobucket.com/user/guyver12/media/guyver12016/image-1.jpg.html)

Snake Plissken
11-30-2013, 02:27 PM
Yeah this would be intersting
http://i270.photobucket.com/albums/jj83/guyver12/guyver12016/image.jpg (http://s270.photobucket.com/user/guyver12/media/guyver12016/image.jpg.html)

http://i270.photobucket.com/albums/jj83/guyver12/guyver12017/image.jpg (http://s270.photobucket.com/user/guyver12/media/guyver12017/image.jpg.html)

I still like this
http://i270.photobucket.com/albums/jj83/guyver12/guyver12016/image-1.jpg (http://s270.photobucket.com/user/guyver12/media/guyver12016/image-1.jpg.html)

Isn't his one whole leg exposed? It was weird seeing Arnold running with an Endo foot out :lol

guyver1
11-30-2013, 02:46 PM
Isn't his one whole leg exposed? It was weird seeing Arnold running with an Endo foot out :lol

They can have a semi BD sculpt too
http://i270.photobucket.com/albums/jj83/guyver12/guyver12018/image.jpg (http://s270.photobucket.com/user/guyver12/media/guyver12018/image.jpg.html)

Snake Plissken
11-30-2013, 02:50 PM
I didn't care for that one, he looked like he had Pink Eye.

Rambler
11-30-2013, 03:02 PM
I didn't care for that one, he looked like he had Pink Eye.

:lol:lol John farted on his pillow!!:rotfl

Snake Plissken
11-30-2013, 03:15 PM
:lol:lol John farted on his pillow!!:rotfl

:rotfl:rotfl:rotfl

paramoremcr88
11-30-2013, 03:57 PM
Current display. Loving the T-1000, it's beautifully made.

http://i1285.photobucket.com/albums/a582/paramoremcr88/6467a89f413e1bc9a037652ba8608840_zpsa2858202.jpg (http://s1285.photobucket.com/user/paramoremcr88/media/6467a89f413e1bc9a037652ba8608840_zpsa2858202.jpg.h tml)

Leon 911
11-30-2013, 05:15 PM
I wouldn't mind a TX .... Just for the sake of art. Nice red leather.... Hmm.... Yes i would want one. A TX endo would do good too. No one has made it so far ... So....


Sent from my iPad using Tapatalk HD

The Skull
11-30-2013, 05:54 PM
If they made T3 figures I would buy them, but I'm not begging for them though, much better terminator figures to be made first to complete T1 and T2

New diecast endo
Kyle Reese 84 look
Police Shootout/tanker truck
Little John

Snake Plissken
11-30-2013, 06:21 PM
If they made T3 figures I would buy them, but I'm not begging for them though, much better terminator figures to be made first to complete T1 and T2

New diecast endo
Kyle Reese 84 look
Police Shootout/tanker truck
Little John

With that list, I could call it a day collecting Terminator :peace

Royce12
11-30-2013, 06:24 PM
Can't wait for mine to arrive. I think I may go with the full BD face but with the full left arm. Not movie accurate I know but I like him holding two weapons. I don't have this one yet and I'm already looking forward to a full endo release.

Sent from my Nexus 7 using Tapatalk

The Skull
11-30-2013, 06:30 PM
With that list, I could call it a day collecting Terminator :peace

Yes sir, me to except I would like to have the 1:1 Endoskull in the collection for me to be content I think.

kinua28
11-30-2013, 07:19 PM
Current display.

Thank you!:wave

http://www.sideshowcollectors.com/forums/attachment.php?attachmentid=69719&stc=1&d=1385865495
http://www.sideshowcollectors.com/forums/attachment.php?attachmentid=69720&stc=1&d=1385865559

BadMuthaDude
11-30-2013, 07:46 PM
This is one of those figures that you just have to pull out of the detolf and just admire the details.