Darth_Calibrate
Freaked Out
- Joined
- Feb 3, 2012
- Messages
- 130
- Reaction score
- 0
Hi i found a great & simple way to seal framed cabinet doors from the evils of dust, it all involves felt tape. 
1. 2 thickness types of tape 40mm and 15mm i think
2. place the thinner tape along the sticky side of the thicker tape
3. run the tape around the inside of the cabinets door frame (not the door frame itself) you can also run some thinner tape around the door for extra sealing, depending on the shelfs you may need to cut notches into the tape, you can easily find this by running a little bit of the edge inside the cabinet like your going to place it and mark where the shelves are with a marker, and just use that as a reference for cutting.
Also you can use the felt to hide any electrical cables and give them extra protection.
Thanks for reading hopes this helps you guys keep your collectables in great condition.
1. 2 thickness types of tape 40mm and 15mm i think
2. place the thinner tape along the sticky side of the thicker tape
3. run the tape around the inside of the cabinets door frame (not the door frame itself) you can also run some thinner tape around the door for extra sealing, depending on the shelfs you may need to cut notches into the tape, you can easily find this by running a little bit of the edge inside the cabinet like your going to place it and mark where the shelves are with a marker, and just use that as a reference for cutting.
Also you can use the felt to hide any electrical cables and give them extra protection.
Thanks for reading hopes this helps you guys keep your collectables in great condition.
