Little touch up on head paint

Hey everyone i was making a clark kent so i cut the s out of chris reeve hair. Being the expert newb that i am i used a sharpie to color the hair where i cut. i hit the head just a little bit and it left a black dot that is driving me crazy. So my question is, Without knowing how to paint at all is there anything i can use to cover the black dot without messing up the head ? any advice would be great, thanks.

you can clean the black dot using a light tinner (like tamiya tinner)
and rub it very gently so the facial paint doesn't come off too

k4m2 said:

you can clean the black dot using a light tinner (like tamiya tinner)
and rub it very gently so the facial paint doesn't come off too

Click to expand...

Awesome, thanks alot , i'll give that a try as soon as i can.

Be extremely careful if you use thinner or you will be repainting the head. I would thin the thinner with windex, gradually strengthening the mixture with thinner.

A better solution might be to cover the black spot with flesh tone paint. Thinner can quickly become a disaster if you get it where you don't want it.

use water.... and apply with cotten.. rub with alittle force..